DINAN D760-0060 Turbo Inlet Pipe Instruction Manual
- June 4, 2024
- DINAN
Table of Contents
Dinan Engineering
4800 US Hwy 280 West Opelika, AL 36801
Phone: 800.341.5480
Installation Instructions
D760-0060: G2X B46
TURBO INLET
Document Revision: A
Release Date: 4/28/2022
D760-0060 Turbo Inlet Pipe
Thank you for being selective enough to choose a Dinan Performance Turbo
Inlet. The Dinan Engineering Team has spent many hours developing this product
to assure that you will receive increased performance, durability, and an
aesthetic design that you as a customer will be able to enjoy for many years.
Ease of installation and maintenance is important to us and has been highly
considered throughout the design process.
Prior to performing the installation, familiarize yourself with these
instructions as they should help you with the process. If you feel that you do
not have the required skills or tools, please arrange for a qualified repair
facility to perform the installation.
If you have any difficulties during the installation, or if these instructions
are not clear to you, please call Dinan’s Technical Support Staff at
800-341-5480.
Again, thank you for choosing Dinan. Enjoy.
PARTS LIST
- [ D763-0183 ] TURBO INLET ASSY; B46
- [ #48Z ] CLAMP 9MM 80-100
TOOLS REQUIRED
Basic hand tools such as screwdrivers (including bits such as Torx), pliers, and picks are required; no specialty tools are required.
INSTALLATION
| STEP 1:
Disconnect the airbox temperature sensor and loosen the airbox outlet hose
clamp. Remove the airbox assembly by pulling vertically.
---|---
| STEP 2:
Loosen the clamp on the secondary intake tube. Remove the secondary intake
tube.
Note: The turbo inlet is now exposed. Items that fall inside can cause
significant damage to the turbo!
| STEP 3:
Disconnect the two electrical connectors from the turbo inlet.
| STEP 4:
Disconnect the two stacked EVAP line fittings from the turbo inlet.
| STEP 5:
Disconnect the PCV breather line fitting from the valve cover.
| STEP 6:
Disconnect the turbo inlet spring clip and remove the turbo inlet.
| STEP 7:
Transfer the sealing ring and spring clip from the OEM turbo inlet to the
Dinan turbo inlet.
Note: The orientation of the sealing ring is critical for the safe
operation of the engine. The sealing ring must be
installed to match the OEM orientation. Incorrect installation may result in
damage to the turbo, intercooler, engine, or other related components.
| STEP 8:
Transfer the heated PCV valve from the OEM turbo inlet to the Dinan turbo
inlet
| STEP 9:
Install the Dinan turbo inlet.
Note: Ensure that the spring clip is fully seated for proper
functionality of the turbo inlet.
| STEP 10:
Connect the PCV breather line fitting to the valve cover.
| STEP 11:
Connect the two stacked EVAP line fittings to the turbo inlet.
| STEP 12:
Connect the two electrical connectors to the turbo inlet.
| STEP 13:
Install the intake, following the disassembly steps in reverse order.
Installation Instructions- D760-0060 REV. A
Documents / Resources
|
DINAN D760-0060 Turbo Inlet
Pipe
[pdf] Instruction Manual
D760-0060, G2X B46, Turbo Inlet Pipe, D760-0060 Turbo Inlet Pipe, Inlet Pipe,
Turbo Inlet
---|---