DJI Fly APP User Guide
- June 12, 2024
- DJi
Table of Contents
DJI Fly APP User Guide
- Please power on the drone and the remote controller, and ensure that the remote controller has been linked to the drone successfully;
- Please ensure the firmware, the APP, and the flysafe database have been updated to the latest version;
- Please ensure the DJI Fly APP has a good internet connection. Ensure the GPS satellites reach more than 10.
- Please ensure the unlocking license is turned off when the drone is not taking off in the unlocked area, or the return to home function will be affected.
Step 1
Please visit ‘DJI Fly APP-Profile’, make sure to log into the DJI account that
was submitted correspondingly online.
Step 2
Please go to the camera view and tap ‘…’ on the upper right corner, visit
“Safety – Unlock GEO Zone – Account Unlocking Licenses”, and you can view all
the unlocking license details under the logged-in DJI account. Please choose
the requested Flight Controller Serial Number and tap ‘Import to Aircraft’,
the page will Indicate “License imported successfully”;
Step 3
Please visit ‘Aircraft Unlocking Licenses’. Slide the switch of the license to
the right side, and agree with the statements. The unlocking license will be
activated;
Step 4
With the unlocking license activated, the area that you have requested to
unlock will be shown on the map. The lower-left corner of the map shows the
details of the license.
Troubleshooting Steps for Unlocking Failure:
If the drone is failed to be unlocked, please:
- Ensure that all of the DJI Fly APP, fly safe database, the firmware of the drone and remote controller has been updated to the latest version. Otherwise, the drone may not take off.
- If all the firmware has been updated, please connect the drone with the APP, then log in to the DJI account which has been used for submitting the unlocking request, to download the unlocking license.
- Ensure the mobile device has a good internet connection.
- Turn on the drone and the remote controller and link them repeatedly.
If it doesn’t work, please:
- Log out and log in to your DJI account.
- Uninstall and reinstall the APP.
- Using another mobile device.
If this issue still exists, please send the below information to flysafe@dji.com for further assistance:
- A video of the whole unlocking process (From turning on the drone until the unlock failure)
- A screenshot to show the logged in DJI account.
- A screenshot of the current flying coordinates.
- Connect the drone with the App correctly, then make a screenshot of the app’s Unlocking List page (General setting->Unlocking list-APP/Aircraft).
- Connect the drone with the App correctly, then make a screenshot of the APP’s about page (General setting->About-Flight controller SN).
- A screenshot of the ‘no fly zone’ in the APP.
- The operating system of the mobile device (Android system or IOS system)
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>