CORSAIR Scimitar RGB Elite Instructions
- June 7, 2024
- Corsair
Table of Contents
CORSAIR Scimitar RGB Elite
GETTING TO KNOW YOUR MOUSE
A — LEFT CLICK BUTTON
B — MIDDLE CLICK BUTTON
C — RIGHT CLICK BUTTON
D — OPTICAL GAMING SENSOR
E — SIDE KEYPAD BUTTONS
F — USB CONNECTION CABLE
G — PROFILE CYCLE BUTTON
H — DPI CYCLE BUTTON
I — PTFE GLIDE PADS
J — KEYPAD SLIDER LOCK
SETTING UP YOUR MOUSE
Turn on your computer and connect the mouse to available USB 2.0 or USB 3.0 port on your computer.
Download the iCUE software from www.corsair.com/downloads.
Run the installer program and follow instructions for installation.
ADJUSTING THE KEY SLIDER
Patented Key Slider™ control system lets you reposition the 12 side buttons to comfortably fit your grip. To adjust the keypad slider, please follow the steps below:
Insert the included Allen key into the keypad slider lock located at the bottom of the mouse and turn it counterclockwise to unlock the keypad.
Move keypad to desired position and turn the Allen key clockwise to lock the keypad.
ONBOARD PROFILES
Three onboard profile slots hold predefined DPI settings, button assignments and lighting effects. All those settings can be fully customized using iCUE software and stored back in onboard memory.
|
PROFILE #1
| PROFILE #2|
PROFILE #3
---|---|---|---
ONBOARD PROFILE STATUS LED
| RED| GREEN|
BLUE
DPI STAGE STATUS
STAGE #1
| RED| 800 DPI| 400 DPI|
800 DPI
STAGE #2
| WHITE| 1500 DPI| 800 DPI|
1500 DPI
STAGE #3
| GREEN| 3000 DPI| 1500 DPI|
4500 DPI
STAGE #4
| PURPLE| 6000 DPI| 3000 DPI|
9000 DPI
STAGE #5
| CAPRI| 9000 DPI| 6000 DPI|
18000 DPI
KEYPAD SLIDER MAPPING
BUTTON 1
| 1| 1|
1
BUTTON 2
| 2| 2|
2
BUTTON 3
| 3| 3|
3
BUTTON 4
| 4| 4|
4
BUTTON 5
| 5| 5|
5
BUTTON 6
| 6| 6|
6
BUTTON 7
| 7| 7|
7
BUTTON 8
| 8| 8|
8
BUTTON 9
| 9| 9|
9
BUTTON 10
| 0| 0|
0
BUTTON 11
| –| –|
–
BUTTON 12
| =| =|
=
CORSAIR MEMORY, Inc. encourages customers to recycle used electronic hard ware and rechargeable batteries in accordance with local laws and regulations.
NOTE ON ENVIRONMENTAL PROTECTION
After the implementation of the European Directive 2012/19/EU in the national
legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>