KOHLER K-1118-RA Expanse Alcove Bath Right Drain Owner’s Manual
- June 29, 2024
- Kohler
Table of Contents
KOHLER K-1118-RA Expanse Alcove Bath Right Drain
Specifications
- Model: 60 x 30 alcove bath, right drain K-1118-RA
- Weight: 70 lbs (31.8 kg)
- Water Depth: 12-11/16″ (322 mm)
- Water Capacity: 55.6 gal (210.5 L)
- Basin Area (Bottom): 45-5/16″ x 25-9/16″ (1151 mm x 649 mm)
- Basin Area (Top): 52-9/16″ x 28-1/16″ (1335 mm x 713 mm)
Product Information
This 60 x 30 alcove bath with a right drain, model K-1118-RA, is\ designed for easy alcove installation. It features an integral flange detail and is made of high-quality material.
Installation Instructions
- Measure your actual product for rough-in details.
- Install the product according to the provided installation instructions.
- Ensure the hot water supply is at least 70% of the bath capacity.
- Installations may vary, so follow specific guidelines based on your setup.
Recommended Products/Accessories
- K-7213 27 Cable Bath Drain
- K-7214 27 Cable Bath Drain
- K-7259 Brass toe tap bath drain
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31796 Above-the-floor bath drain kit
- K-31798 Bath drain kit
FAQ
- Q: Can I use any type of drain with this alcove bath?
- A: It is recommended to use one of the specified drains like K-7213, K-7214, or others listed in the manual for best compatibility.
- Q: What is the water capacity of this alcove bath?
- A: The water capacity is approximately 55.6 gallons (210.5 liters).
- Q: How deep is the water in this alcove bath?
- A: The water depth is approximately 12-11/16 inches (322 mm).
Features
- Curved basin creates a comfortable bathing experience
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
- Textured bottom surface
Material
- Acrylic
Installation
- Right drain
- Alcove
Recommended Products/Accessories
- K-7213 27″ Cable Bath Drain
- K-7214 27″ Cable Bath Drain
- K-7259 Brass toe tap bath drain
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31796 Above-the-floor bath drain kit
- K-31798 Bath drain kit
Codes/Standards
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- IAPMO Certification
KOHLER® Plastic Baths and Receptors Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Dimension
No change in measurements if connected with drain illustrated. (K-7213)
Technical Information
All product dimensions are nominal.
- Drain location: Right
- Basin area, bottom: 45-5/16″ x 25-9/16″ (1151 mm x 649 mm)
- Basin area, top: 52-9/16″ x 28-1/16″ (1335 mm x 713 mm)
- Weight: 70 lbs (31.8 kg)
- Minimum floor load: 45 lbs/ft² (219.7 kg/m²)
- Water depth: 12-11/16″ (322 mm)
- Water capacity: 55.6 gal (210.5 L)
Notes
Measure your actual product for rough-in details. Install this product according to the installation instructions. The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
Contact
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to
- www.kohler.com
- USA or www.kohler.ca Canada
- 6-12-2024 20:33 – US
References
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>