TELESIN T-10 Camera Remote Control User Manual

TELESIN T-10 Camera Remote Control

Product Information

The Camera Remote Control is a device designed to remotely control a camera. It allows users to capture photos, record videos, and set various modes and settings on their camera. The remote control features a LCD display for easy navigation and monitoring of camera settings. It is equipped with Bluetooth technology for wireless connectivity to compatible cameras. The remote control is powered by a rechargeable battery and comes with a charging port for convenient charging.

Product Usage Instructions

1. Wearing the Remote: Attach the remote control to your wrist using the wrist strap fixing slot or attach it to a lanyard using the anchor point.

2. The Basics: Familiarize yourself with the buttons and features of the remote control. These include the Shutter/Select Button, Pairing/Setting Button, Power/Mode Button, LCD Display, Start Button, and Charging Port.

3. Pairing: To connect the remote control to your
   camera, follow these steps:

4. In the state of the first camera connected, long press the Pairing Button for 3 seconds.

5. The remote control’s Bluetooth indicator will start flashing.

6. You can now connect the second camera and up to a maximum of 5 cameras.

7. To connect additional cameras, repeat the pairing process.

8. All connected cameras can be controlled simultaneously.

9. Power On/Off: To turn on the remote control, long press the Mode Button for 2 seconds. To turn off the remote control, long press the Mode Button for 3 seconds.

10. Camera Control: Use the remote control to control your camera’s functions. Here are some key functions:

    • Shutter/Select Button:
    • Short press: Shoot photo, turn on/off recording.
    • Long press for 3 seconds: Enter phone pairing mode, only photo function in phone mode, Bluetooth name is T-10.
    • Star Button:
    • Long press for 3 seconds: Set the current main mode to Quick mode.
    • Short press for 1 second: Enter the main mode corresponding to the Quick mode.
    • Mode Button (Power/Mode Switching):
    • Long press for 2 seconds: Power on.
    • Long press for 3 seconds: Power off.
    • Long press for 1 second: Mode switching.
    • Settings Button (Pairing, small mode switching):
    • Short press: Switch between the normal sub-modes of the main mode. The sub-modes may vary depending on the camera model.

11. Charging: To charge the remote control, follow these steps:

12. Plug the charging cable into the charging slot of the remote control.

13. Connect the other end of the cable to a computer or other USB power source.

14. The screen will light up, and the power indicator will start working.

15. Charging time is approximately 2.5 hours.

16. The remote control can be used for up to 10 hours on a full charge.

17. Keep the charging device away from metal objects to prevent short circuits and fire hazards.

18. Electricity Level: The LCD display of the remote control indicates the remaining power level. The power levels are as follows:

    • 0-5%: Cam Display Side blinking
    • 5-24%: Cam Display Side always On (1/3 Power)
    • 25-49%: Cam Display Side always On (2/3 Power)
    • 50-74%: Cam Display Side always On (Full Power)
    • 75-100%: RC Display Side always On (Full Power)

19. Warranty: This product is guaranteed for 2 years from the date of purchase. For repairs or other services during the warranty period, contact the product seller with the original proof of purchase.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer   Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Wearing the Remote

The Basics

LCD Display

Button

Shutter/Select Button

• 1 Short press: Shoot photo, turn on/off recording.
• 3s Long Press: Enter phone pairing mode, only photo function in phone mode, Bluetooth name is “T-10”.

Star Button
When in the three main modes “Video”, “Photo”, “Time-lapse”

• 3s Long Press: Set the current main mode to “Quick mode”.
• 1s Short Press: Enter the main mode corresponding to the “Quick mode.

Mode Button (Power/Mode Switchin)

After pairing, you can control the camera on and off.

Settings Button (Pairing, small mode switching)
1 short press: The camera switches between the normal sub-modes of the main mode.
The sub-modes of different camera models are different and cannot be standardized.

Pairing

Setting button and 3s Long Press: The remote control enters pairing mode, and the Bluetooth indicator flashes.
Camera Settings: Select Connections > Connected Devices > Remote Control. Put the camera into pairing mode. Wait for a successful pairing message to appear on the camera screen.
If the pairing fails, select Reset Connection in the camera settings and repeat the process.
If the camera has already been paired, you don’t need to pair it again when you connect the remote-control next time, just make sure the wireless connection of the camera has been turned on, and it will be connected automatically after a few moments.
When the camera is not used for a long time, the wireless connection may be turned off completely, so please unplug the camera battery and plug it back in to activate the wireless connection.

Pair up to 5

Cameras Mode
In the state of the first camera connected, long press the [pairing button 3 seconds remote control Bluetooth [indicator] flashing, you can connect the second camera and so on, the maximum number of connected 5.

Status Display
The display status of the first camera connected.

Power On/Off
All the connected cameras can be controlled at the same time to [shutdown].
Only the first connected camera can remain connected in the shutdown state.
The first connected camera can be controlled to [Power on].
Connecting the next four cameras requires the previous steps to be performed again.

Charging
Plug the charging cable into the charging slot. Connect the other end of the cable to a computer or other USB power source.

• Charging time: 2,5 h,
• Usage time: 10 h

Please keep the charging device away from metal objects to prevent fire caused by short circuit.
When charging, the screen lights up and the power indicator starts to work.

Electricity Level

Remaining Power Cam Display RC Display

• 0-5 Side blinking Side always On
• 5-24 Side Always On
• 25-49 1/3 Power 1/3 Power
• 50-74 2/3 Power 2/3 Power
• 75-100 Full Power Full Power

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative: Importer: Alza.cz a.s.
Registered office : Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440

Subject of the declaration:
Title: Camera Remote Control
Model / Type : GP-RMT-T10 Hero
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

• Directive No. 2014/53/EU
• Directive No. 2011/65/EU as amended 2015/863/EU

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>