Bailey USB Charger 10 Ports Instruction Manual
- June 12, 2024
- Bailey
Table of Contents
Bailey USB Charger 10 Ports
Specifications
- Input voltage range: 220-240V
- Frequency: 50/60Hz
- Overvoltage protection: I/P-O/P,I/P-FG:1.5KV AC, O/P-FG:0.5KV AC 1 min
- Output voltage: 5V
- Output current: 10A
- Power: 50W
- Output voltage regulator: ±10%
- Output overload protection: 90%-105%
- Ambient temperature: -20~50°C
- Power cable length: 1.5m
Warning
- Please read the user manual carefully before using this product.
- This charger has a built-in smart control chip, the output current of it can be distributed intelligently to each port and do not interfere with each other.
- Charger will automatically identify the input current of charged device.
- All USB ports can be used at the same time.
- The output will be powered off automatically after the device is fully charged.
- This charger has built-in safety protections against over-power, over-voltage, over-current, over-temperature and short-circuit.It can effectively prevent the occurrence of accidents.
- It is not waterproof. Please keep away from water, liquid and damp places.
- Do not use close to a fire source, heated objects or in direct sunlight.
- Only use in areas with below an altitude of 2000m.
- The charger may be a little hot when charging, which is normal.
Contact
Address: Bailey Electric & Electronics bv Everdenberg 21 4902TT Oosterhout
Netherlands
Tel: +31 (0)162 52 2446
Website: www.bailey.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>