ggm gastro GLSPME44 Glasswasher Instruction Manual

: June 12, 2024
: ggm gastro

Table of Contents

ggm gastro GLSPME44 Glasswasher
GENERAL INFORMATION
INSTALLATION
SAFETY INSTRUCTIONS
OPERATION
CLEANING & MAINTENANCE
TROUBLESHOOTING
SPARE PART LIST-EXPLODING DRAWING
ELECTRIC CIRCUIT SCHEMA
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ggm gastro GLSPME44 Glasswasher

ggm-gastro-GLSPME44-Glasswasher-product

GENERAL INFORMATION

Before installing the appliance, read operation and maintenance instructions carefully.Wrong installation and part changing may damage the product or may cause injury on people.It are not in our company’s responsibility to damage the appliance intentionally, negligence, detriments because of disobeying instructions and regulations, wrong connections. Unauthorized intervention to appliance invalidates the warranty.

This instruction manual should be kept in a safe place for future reference.
Installation should be made in accordance with ordinances and security rules of that country by a qualified service personnel.
This appliance has to be used by a trained person.
Please turn off the appliance immediately in the event of malfunction or failure.The appliance should be repaired only by authorized service personnel.Please demand original spare part.

PRODUCT DESCRIPTION

The Professional Glasswasher,that provides high efficiency has been designed to be usedin industrial kitchens.

Product Code| Dimensions (mm)| Weight (kg)| Packaging

Dimensions (mm)

---|---|---|---
GLSPME44| 480x580x720| 43| 500x630x870

TECHNICAL INFORMATION

Product Code

| Basket Dimension (mm)| Power (KW)| Operating Voltage

(V)

| Water Pressure| ****

Program piece

| ****

Cable (mm²)

| ****

Fuse (A)

---|---|---|---|---|---|---|---
GLSPME44| 400×400| 5| 220| 2-4| 3| 3×2,5| 32

TRANSPORTATION

This appliance can not be moved by hand from area to area.It must be moved on pallet with forklift truck.

UNPACKING

Please unpack the package according to the security codes and ordinances of current country and get rid from the pack.Parts which contacts with food are produced by stainless steel.All plastic parts are marked by material’s symbol.
Please check that all the parts of appliance had come completely and if they are damaged or not during the shipping.

INSTALLATION

Please place the product to straight and sturdy ground,please take necessary steps against possibility of overturn.
Technician who will serve for installation and service for the appliance must be professional on this subject and must have installation and service licenses by the company.
Connection to Electric Power Supply must be done by authorized person.
Please be sure that the voltage connected to appliance must be equal with the voltage which is on appliance’s label.
This appliance must be connected to an earthed outlet in accordance with safety rules and standards.
Appliance’s earthing must be connected to earthing line on panel which is nearest to electric installation.
Connection to the main fuse and leak current fuse must be done in accordance with the current regulations.

SAFETY INSTRUCTIONS

Do not use the appliance in insufficient lighted place.
Do not touch the moving attachments while the appliance operates.
Do not install the appliance in the presence of flammable or explosive materials.
Do not operate the appliance when the machine is empty.
Do not load so less or more than appliance’s capacity.
Do not attempt to use the appliance without suitable protective equipments.
Because of any reason if there is a fire or flame flare where the appliance is used,turn off all gas valves and electric contactor switch quickly and use fire extinguisher .Never use water to extinguish the fire.
All the damages because of not having earthing connection will not be on warranty.
Do not wash the decorated glasses.Prevent silver wares to contact with the other metals.

OPERATION

ggm-gastro-GLSPME44-Glasswasher-fig-1

Control Panel

A: Appliance ON lamp
B: Water heated lamp
C: Washing lamp
D: Water getting /rinsing
E: Evacuation lamp
F: Evacuation position
G: Appliance OFF position
H: Water inlet
I: Washing program

Operating

Change the water that is in water tank 3 times in a day.
Before putting the glasses in to the appliance,make prewash with cold or warm water without using any detergent.
Turn on water source valve.
Plug in the appliance.
In order to take off any residue that remain in storage or pipes,operate the appliance when it is empty.
In order to operate the appliance switch to ‘Water Inlet’ position. Water Inlet lamp signals.It means power is given to glasswasher,water is given and heated.
When heating process completed, water heated lamp signals.
Place the dirty glasses to the baskets.
Close the lid and switch to washing program.Involved indicator lamp signals and washing process starts.
Washing process; for hot water and washing with detergent (minimum 55°C) ,for rinsing with hot water (minimum 75°C).
In order to stop washing,open the lid when it is at ‘Washing’ position.
After the washing is completed, the machine will automatically rinse with hot water for 15 seconds, then rinse with cold water for 15 seconds and automatically drain excess water.
Take off the basket that includes washed glasses.

CLEANING & MAINTENANCE

CLEANING AND MAINTENANCE AFTER EVERY USE

Always turn off the appliance and disconnect from the power supply before cleaning.
Clean all surfaces of the appliance with hot soapy water after every use.Rinse and dry with a wet cloth.
Clean the control panel with soft moisty cloth,if necessary use ineffective detergent.
Do not use abrasive cleaning chemicals as these can leave harmful residues.
Do not clean the appliance by spraying water directly,otherwise electric motor may get damaged.

PERIODIC CLEANING AND MAINTENANCE

Maintenance should be done by qualified person.
Clean the limes of the burner,inner surface of the washing tank and water pipes once or twice in a year.
Clean the limes with using rinsing and washing nozzles once in a month by using vinegar or lime remover.
Clean the filters in the appliance once in a week.After cleaning be sure that thumbscrew is compressed.
Clean the appliance’s fountains once in 15 days by detaching it.

TROUBLESHOOTING

GLASSES ARE NOT WASHED WELL

| ****

1. Clean the absorption filter if it is dirty.

2. Check the fountains if they are accumulated with residues or not.

3. Check the amount of detergent.

4. If the chosen washing program is too less,repeat the program.

5. Be sure that the dishes are placed correctly on baskets.

---|---

GLASSES ARE NOT DRIED WELL| 1. Check that if there is polisher or not if necessary add some.

2. Check the amount of polisher.

---|---

MIST OVER ON CUPS

| 1. Take off the baskets after washing.
---|---

RUST ON CUPS

| 1. Only use products that are not foaming for the

professional glasswashers.

---|---

MUCH FOAM AT STORAGE

| 1. Check the amount of detergent.

2. If foaming detergent is used,pour it and rinse the storage till the foams are lost.

---|---

WASHING OR RINSING

HANDLES ARE TURNING SLOWLY

| 1. Take off washing handles and clean them.

2. Clean the washing pump absorbing filter.

---|---

VISCIDITY ON CUPS

| ****

1. Reduce the amount of polisher.

---|---

If glasswashing is not done at suitable quality

If any function of security doesn’t work
Do not use the appliance.

If these problems are still going on,contact with our authorized services.

SPARE PART LIST-EXPLODING DRAWING

ggm-gastro-GLSPME44-Glasswasher-fig-2

NAME OF THE PRODUCT:1100-MS

NO| NAME OF THE PRODUCT| PRODUCT CODE
1| MAGNETIC SENSOR| ERK.M.ELK-SWC-KTG-004
2| LEVER| ERK.M.ELK-SLT-PKO-011
3| GLASS FUSE 5A| ERK.M.ELK-SGR-011
4| LC1K0901M7 CONTACTOR| ERS.M.ELK-KNT-KNT-020
5| CONTACTOR LC1K0910M| ERS.M.ELK-KNT-KNT-021
6| LC1K1210M7 CONTACTOR| ERS.M.ELK-KNT-KNT-022
7| evacuation time relay| ERK.M.ELK-KNT-ROL-007
8| WASH TIME RELAY| ERK.M.ELK-KNT-ROL-020
9| ELECTRICAL PANEL GROUP| M.ELK-PNO-BYM-019
10| PROCESTAT FLOAT| M.ELK-MUH-001
11| TOP COVER SHEET| YSC-ERS.BYM-LZ-0469
12| BASKET| M.PLS-ERS-024
13| CHASSIS| –
14| BACK COVER SHEET| YSC-ERS.BYM-PN-0359
15| LEFT SIDE SHEET| YSC-ERS.BYM-PN-0356
16| SPINNING SPINDLE| YTL-ERS.BYM-KS-0031
17| DETERGENT SEAL| M.CNT-ERS-013
18| UPPER SPIN| M.ENJ-ERS-PLS-BYM-054
19| SPRAY SCREW| M.ENJ-ERS-PLS-BYM-031
20| BOTTOM SPIN| M.ENJ-ERS-PLS-BYM-055
21| SPRAY PIPE| YBR-ERS.BYM-KS-0009
22| FOUNTAIN ARM| M.ENJ-ERS-PLS-BYM-045
23| SPRAY BOTTOM SHEET| YSC-ERS.BYM-LZ-0054
24| LOWER SPRAY ELBOW| M.ENJ-ERS-PLS-BYM-046
25| INLET FITTING| YTL-ERS.BYM-KS-0033
26| VALVE HOSE| ERS.M.MEK-TES-HRT-006
27| HOSE (150CM)| ERS.M.MEK-TES-HRT-011
28| WASTE WATER HOSE| M.MEK-TES-HRT-107
29| POLISHING PUMP HOSE| M.MEK-TES-HRT-020
30| RINSE PORT| YTL-ERS.BYM-KS-0004
31| DETERGENT ENTRY PLASTIC| M.PLS-ERS-036
32| AIR TRAP LOCATION| M.ENJ-ERS-PLS-BYM-015
33| VALVE DOUBLE| M.ELK-SLN-PLS-008
34| DETERGENT SEAL| M.CNT-ERS-013
35| AIR TRAP| M.ENJ-ERS-PLS-BYM-019
36| OUTPUT PIPE| YBR-ERS.BYM-KS-0004
37| BOILER TANK| M.MEK-TES-BYM-BYL-003
38| DRAIN WEDGE| M.ENJ-ERS-PLS-BYM-016
39| FILTER COVER| M.ENJ-ERS-PLS-BYM-086
40| DISCHARGE WEDGE LOCATION| M.ENJ-ERS-PLS-BYM-112
---|---|---
41| FILTER GASKET| M.CNT-ERS-021
42| RINSE SPIN HOSE| M.MEK-TES-HRT-103
43| TANK RESISTANCE 230V-2500W| M.ELK-RZS-BRU-BYM-028
44| BOILER RESISTANCE-220V-2000W| M.ELK-RZS-BRU-BYM-018
45| FOOT| M.AKS-AYK-INX-004
46| DRAIN PUMP| M.ELK-MTR-PMP-002
47| FILTER| M.ENJ-ERS-PLS-BYM-041
48| FILTER LOCATION| M.ENJ-ERS-PLS-BYM-042
49| FILTER GASKET| M.CNT-ERS-021
50| WASHING MOTOR| M.ELK-MTR-PMP-003
51| ORING| M.CNT-ORG-009
52| 5/8 SILICONE HOSE| HTS-HRT-004
53| WASHING PUMP HOSE| ERS.M.MEK-TES-HRT-014
54| RESISTANCE COVER| M.ENJ-ERS-PLS-BYM-025
55| THERMOSTAT PIPE| YBR-ERS.BYM-KS-0003
56| THERMOSTAT 0-90°C| M.ELK-MEK-TRM1-008
57| POLISHING PUMP| M.ELK-MTR-PMP-004
58| BOTTOM COVER SHEET| YSC-ERS.BYM-LZ-0476
59| SLEEVE PART| YTL-ERS.BYM-KS-0119
60| TOP COVER ARM RIGHT LEFT SHEET| YSC-ERS.BYM-LZ-0475
61| COVER OUTER SHEET| YSC-ERS.BYM-PN-0354
62| DOOR HANDLE| ERS.M.AKS-KLP-INX-003
63| MAGNET LOCATION| M.ENJ-ERS-PLS-BYM-001
64| MAGNET| M.MIK-ERS-001
65| LOCK KIT SPRING PLACE| YTL-ERS.BYM-KS-0073
66| BEAR| M.MUH-021
67| COVER LOCK SPRING| M.YAY-ERS-035
68| LOCK BODY| YTL-ERS.BYM-KS-0072
69| CORNER PLASTIC RIGHT| M.ENJ-ERS-PLS-BYM-061
70| CORNER PLASTIC LEFT| M.ENJ-ERS-PLS-BYM-062
71| SWITCH BUTTON| ERS.M.AKS-DGM-MUH-001
72| GREEN WARNING LAMP| ERS.M.ELK-LMB-SNY-001
73| YELLOW WARNING LAMP| ERS.M.ELK-LMB-SNY-003
74| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-015
75| RIGHT SIDE SHEET| YSC-ERS.BYM-PN-0357