reolink F1 Plug-in WiFi Outdoor Flood Lights Works Camera User Guide
- June 12, 2024
- reolink
Table of Contents
August 2022
QSG1_A_EN
Quick Start Guide
Apply to: Reolink Floodlight PoE/ WiFi
What’s in the Box
NOTE:
- The power adapter and 4.5m Power Extension Cable only come with WiFi Version.
- Quantity of accessories varies with the product model you purchase.
Floodlight Introduction
WiFi Version 
PoE Version
Set up the Floodlight
Download and launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup.
-
On Smartphone
Scan to download the Reolink App. https://reolink.com/wp- json/reo-v2/app/download -
On PC
Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.
NOTE:
- When setting up the WiFi Floodlight, you need to follow the onscreen instructions to finish the WiFi configuration first.
- If you are connecting the PoE Floodlight to a Reolink PoE NVR, please set up the Floodlight via the NVR interface.
Install the Floodlight
- Install the Floodlight 2-3 meters (7-10 ft) above the ground. This height maximizes the detection range of the PIR motion sensor.
- For better motion detection performance, please install the floodlight angularly.
NOTE: If a moving object approaches the PIR sensor vertically, the floodlight may fail to detect motion.
Mount the Floodlight to the Wall
- Drill holes in accordance with the mounting template.
- Secure the mounting plate to the wall with the upper two screws and hang the floodlight on it.
- Then lock the floodlight in position with the lower screw.
Troubleshooting
Floodlight is not powering on If your Floodlight is not powering on, please
try the following solutions:
For PoE Floodlight
- Make sure your Floodlight is powered on properly. The PoE Floodlight should be powered by a PoE switch/injector, a Reolink NVR or a 12V power adapter.
- If the floodlight is connected to a PoE device as listed above, connect it to another PoE port and check again.
- Try again with another Ethernet cable.
For WiFi Floodlight
- Plug the floodlight into a different outlet and see if it works.
- Power on the floodlight with another working 12V 2A DC adapter and see if it works.
If the problem is not solved, please contact Reolink Support.
Specification
Hardware Features
Light: 40pcs/18W
Dimension: 216X118X160mm
Weight: 635g
Working Temperature: -10°C~+55°C (14°F~131°F)
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
this device may not cause harmful interference, and this device must accept
any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
Simplified EU Declaration of Conformity
Reolink declares that the WiFi floodlight is incompliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU, the PoE
floodlight is in compliance with Directive 2014/30/EU.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other
household wastes.
throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmentally safe
recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if
purchased from Reolink Official Store or a Reolink authorized reseller. Learn
more: https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the floodlight to factory default settings before returning.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of reach of children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you
agree to the terms of this End User License Agreement (“EULA”) between you and
Reolink.
Learn more: https://reolink.com/eula/.
ISED Statements
This device contains licence-exempt transmitter(s)/re ceiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC
The device has been evaluated to meet general RF exposure requirements. The
device can be used in mobile exposure conditions.
The min separation distance is 20cm.
OPERATING FREQUENCY (For WiFi Version)
(the maximum transmitted power)
2412MHz — 2472MHz (19dBm)
Technical Support
If you need any technical help, please visit our official support site and
contact our support team before returning the products:
https://support.reolink.com.
58.03.001.0275
@ReolinkTechhttps://reolink.com
References
- Reolink Official: Security Cameras and Systems for Home & Business
- Reolink Official: Security Cameras and Systems for Home & Business
- Warranty & Return – Reolink
- Reolink Support - Official Reolink Help Center
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>