HUDORA 84103 Skater Helmet Instruction Manual

June 12, 2024
hudora

HUDORA 84103 Skater Helmet Instruction Manual

INSTRUCTIONS ON ASSEMBLY AND USE


CONGRATULATIONS ON PURCHASING THIS PRODUCT!

Please read these instructions carefully. The instructions are an in- tegral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Plea- se always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private / domestic use only. This product is not designed for commercial / industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item:             Skate Helmet
Item number: 84103, 84104, 84108, 84109, 84114, 84118, 84119,
84124, 84128, 84129
Size:            84114, 84124 for head circumference from 48 up to 52 cm | 84103, 84108, 84118, 84128 for head cir-
cumference from 51 up to 55 cm | 84104, 84109, 84119, 84129 for head circumference from 56 up to 60 cm

Weight:           405 g +/- 20 g (84114, 84124) |
395 g +/- 5 g (84103, 84108, 84118, 84128) | 470 g +/- 5 g (84104, 84109, 84119, 84129)
Purpose: Helmet for use when riding a bicycle, pedal-scooter riding, Inline skating, roller skating and skateboarding, in order to protect against the consequences of an ac- cident. This helmet has passed EN1078:2012+A1:2012 to show conformity to the respectively Regulation EU 2016/425.

CONTENTS

1 x Helmet | 1 x These instructions

SAFETY INSTRUCTIONS

  • WARNING! This helmet should not be used by children while climbing or doing other activities when there is a risk of strangu- lation / hanging if the child gets trapped with the
  • WARNING! This helmet is designed and intended exclusively for the use of pedal cyclists and for skateboarders and roller It is not intended for and will not provide adequate safety protec- tion if used during motorsport or moped use.
  • The wearer must have the helmet put on and adjusted by an
  • This helmet was developed to absorb a portion of the energy of a
  • No helmet is able to protect fully against unforeseen injuries! A helmet can only prevent severe injury to the head during a fall. Wearing other protective equipment like arm, knee and elbow pro- tection is Be extremely careful with sports that in- volve riding an object with wheels. Even accidents at slow speeds may lead to serious injuries.
  • The helmet can fully protect only when it fits On the inside of the helmet, you will find a tag with the tested size categories. It is advisable to test different sized helmets for comparison. The choice should fall on a helmet that fits tightly and at the same time comfortably. The helmet should not move when in motion. Do not use the helmet, if it cannot be adjusted optimally. In this case a different size or model should be chosen.
  • Don’t wear a scarf, high hair under the helmet. Danger of injury!
  • When wearing the helmet, the chin strap should be closed!
  • Check the helmet before every ride for visible damage or wear, and tight fit, even if there is no visible damage from the outsi- de, the helmet should be replaced and destroyed after every hard stroke or deep scratches. The helmet must at latest be replaced 7 years after the date of production, since an old or damaged helmet can no longer provide effective protection against
  • Please do not alter or remove any parts of the helmet. It could lead to dangerous
  • The effect of coatings (paint), adhesives, detergents, chemicals and solvents, severely damage the protective effect of the helmet. Clean the helmet with lukewarm
  • The product should not be stored behind glass panes, e.g. in the car (fuel-glass effect) or near heating or warming sources. Uneven helmet surfaces and bubble formation are signs of thermal dama- ge and render the helmet

USAGE INSTRUCTIONS

HOW SHOULD THE HELMET FIT (fig. 1)?

To ensure that the helmet fits correctly, it needs to be adapted to its wearer. The helmet should clasp around the head well and should be worn level. The front edge of the helmet should rest one to two fingers wide above the nasal root so that the forehead remains protected, but it does not hang too deep in the face and the sight is not impaired. Whether the helmet is fastened securely can be tested by shaking the head lightly with the chin straps open.

HOW DO I CORRECTLY ADJUST THE HELMET (fig. 1 – 4)?

The integrated adjustment system can be continuously adjusted. In order to reduce the helmet width, turn the rotary knob A to the right. In order to increase it, turn the rotary knob A to the left. The chin strap C consists of a long circumferential part and a counter part. If necessary, the circumferential part of the chin strap can also be pulled through the middle suspension point in the helmet, in order to set it correctly. The helmet must sit firmly and horizontally on the head. In order to check for the proper tension, the helmet must be put on and the safety lock B closed. The strap divider E should sit below the ears, the strap should not cover the ears. When the mouth is open, the chin strap C should press against the chin. After adjusting the straps, the protruding strap ends can be secured with the retaining ring D and covered with the chin guard.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www. hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropri- ate collection point provided in your area. Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. You can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals