LASER Ford 2.0 EcoBlue TDCi Vibration Damper Pulley Puller Instructions
- June 12, 2024
- Laser
Table of Contents
LASER Ford 2.0 EcoBlue TDCi Vibration Damper Pulley Puller
Product Information:
- Part No.: 7334
- Product Name: Vibration Damper Pulley Puller
- Manufacturer: Laser Tools
- Website: www.lasertools.co.uk
Product Usage Instructions:
- Ensure you are using this product with hand tools only.
- Keep the threaded force screw clean and lubricated with Molybdenum Disulphide grease.
- Failure to adequately lubricate the force screw and frame may result in damage, which will affect the product warranty.
- Refer to OEM derived data such as the vehicle manufacturers’ own data or Autodata for specific guidance on usage.
Compatible Applications:
| Make | Model | Year | Type | Engine Codes |
|---|---|---|---|---|
| Ford | Edge | 2018 – 21 | 2.0 EcoBlue TDCi | BCCA, BCCB, BCCC, BCDA, YLCA, YLCB, |
YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| Focus| 2018 – on| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA, YLCA, YLCB,
YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| Focus Active| 2019 – on| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA, YLCA,
YLCB, YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| Galaxy| 2018 – 21| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA, YLCA, YLCB,
YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| Kuga| 2019 – on| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA, YLCA, YLCB,
YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| Mondeo| 2019 – 21| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA, YLCA, YLCB,
YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| S-MAX| 2018 – 21| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA, YLCA, YLCB,
YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| Transit| 2016 – on| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA, YLCA,
YLCB, YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| Transit Custom| 2016 – on| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA,
YLCA, YLCB, YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
Ford| Tourneo Custom| 2016 – on| 2.0 EcoBlue TDCi| BCCA, BCCB, BCCC, BCDA,
YLCA, YLCB, YLCC, YLDA, YLDC, YLF6,
YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA,
YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6
For more up-to-date applications, please visit the product
page on the
Laser Tools website.
Please note that the instructions provided are for guidance only. It is
recommended to refer to OEM derived data or consult the vehicle manufacturers’
own data for precise instructions. The use of this kit is solely at the user’s
discretion, and Tool Connection
Ltd. cannot be held responsible for any damage caused.
Safety Warnings:
- Only use this product with hand tools.
- Keep the threaded force screw clean and lubricated with Molybdenum Disulphide grease.
- Failure to adequately lubricate the force screw and frame may result in damage, which will affect the product warranty.
Refer to the provided figures below for visual instructions:
Introduction
This Pulley Puller kit has been designed for the latest Ford 2.0L EcoBlue TDCi
engine which features an innovative “belt in oil” design where the synchronous
drive belt is sited inside the oiled area of the engine. In order to gain
access to the timing belt area of these engines it is necessary to remove the
front pulley which often requires some force.
The tool does this by connecting to the inner part of the pulley which ensures
no damage to the rubber component of the pulley.
For timing belt replacement see Laser 7323.
Components
| Ref. | Code | OEM Ref. | Description |
|---|---|---|---|
| A | C866 | 204-158-01* | Crankshaft Protector Spigot |
| B |
C867
|
205-295*
| Puller Bridge
C| Bolts and Washer x 2
D| Force Screw
*NOTE: Performs the function of OEM 205-295 (puller) and 204-158-01 (crankshaft nose protector spigot) for the applications listed only.
Applications
| Make | Model | Year | Type |
|---|---|---|---|
| Ford | Edge | 2018 – 21 | 2.0 EcoBlue TDCi |
| Focus | 2018 – on | ||
| Focus Active | 2019 – on | ||
| Galaxy | 2018 – 21 | ||
| Kuga | 2019 – on | ||
| Mondeo | 2019 – 21 | ||
| S-MAX | 2018 – 21 | ||
| Transit | 2016 – on | ||
| Transit Custom | 2016 – on | ||
| Tourneo Custom | 2016 – on |
Engine Codes
BCCA, BCCB, BCCC, BCDA, YLCA, YLCB, YLCC, YLDA, YLDC, YLF6, YLFA, YLFB,
YLFS, YLR6, YMCA, YMCB, YMCC, YMDA, YMF6, YMFA, YMFB, YMFS, YMR6, YNCA,
YNF6, YNFA, YNFB, YNFS, YNR6
*NOTE: Some Transit use Laser Part No. 8394 (OEM 303-1657).
Always refer to the website for most up to date applications: www.lasertools.co.uk/product/7334
The following instructions are for guidance only. Please refer to OEM derived
data such as the vehicle manufacturers’ own data or Autodata.
The use of this kit is purely down to the user’s discretion and Tool
Connection Ltd. cannot be held responsible for any damage caused what so ever.
Safety Warnings – PLEASE READ
- Personal protection and safety equipment must be used at all times. Eye protection and protective gloves must be worn when using these tools.
- Misuse of tools is unsafe,and can cause engine damage.
- Remove damaged tools from use.
- Store in a dry place when not in use.
Warning:
Only to be used with hand tools.
The threaded force screw must be kept clean and lubricated with Molybdenum
Disulphide grease. Failure to adequately lubricate the force screw and frame
may result in damage which will affect the product warranty.
Where Used
Preparation
- Remove starter motor and install flywheel locking tool.
- Remove auxiliary drive belt.
Important Notes
- Water pump “stretchy” auxiliary drive belt once removed should not be re-used.
- Mark position of RH engine mounting before removal.
- Replacement of the timing belt also requires replacement of the tensioner and cover.
- For Engine Timing Tool use Laser 7323.
Instructions
Component A – Crankshaft Protector Spigot
Component A is used to protect the end of the crankshaft from the forces of
the force screw.
With the crankshaft pulley bolt (1) and auxiliary drive belt (2) removed
insert the crankshaft protector spigot (A) into the end of the crankshaft.
NOTE: The crankshaft retaining bolt must be replaced.
Component B, C and D – Pulley Puller Assembly
Components B, C and D are used to push against component A to pull the pulley
off.
Assemble B, C and D as shown in Fig.2.
- Ensure the force screw (D) is well lubricated with Molybdenum Disulphide grease at the points shown in Fig.2.
- Ensure the holding bolts (C) are evenly tightened and that the force screw (D) sits square and on the centre of the spigot (A).
- Wind the force screw in to pull the pulley off.
Our products are designed to be used correctly and with care for the purpose
for which they are intended. No liability is accepted by the Tool Connection
for incorrect use of any of our products, and the Tool Connection cannot be
held responsible for any damage to personnel, property or equipment when using
the tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information
provided has been designed to offer general guidance for a particular tool’s
use and while all attention is given to the accuracy of the data no project
should be attempted without referring first to the manufacturer’s technical
documentation (workshop or instruction manual) or the use of a recognised
authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the
right to alter specifications and components without prior notice. It is the
responsibility of the user to ensure the suitability of the tools and
information prior to their use.
recycle
When you have finished with this leaflet please recycle it
www.lasertools.co.uk
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 ODR
T +44 (0) 1926 815000 F +44 (0) 1926 815888
info@toolconnection.co.uk
www.toolconnection.co.uk
Guarantee
If this product fails through faulty materials or workmanship, contact our
service department direct on: +44 (0) 1926 818186. Normal wear and tear are
excluded as are consumable items and abuse.
References
- Laser Tools | Premier Automotive Hand Tools designed to make easy work of difficult and awkward jobs.
- Laser Tools 7334 Vibration Damper Pulley Puller - for Ford 2.0 EcoBlue TDCi
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>