LYNX LSB2 Double Side Burner Instructions
- June 12, 2024
- LYNX
Table of Contents
LYNX LSB2 Double Side Burner
Product Information
The Lynx Accessory Switch Kit, model LASK, is designed to power a variety of Lynx accessories directly without a connection to a grill. It includes a power supply and a switch assembly with a mounting plate. This kit is compatible with the following Lynx products:
- LSB1 Single Side Burner
- LSB2 Double Side Burner
- LSB2PC Double Side Burner with Prep Center
- LPB Power Burner
- LSBGE Grill Extender
- LSA30, LSA36, LSA42, LPA36 Classic Cabinets
- LSA30-4, LSA36-4, LSA42-4, LPA36-4 Ventana Cabinets
The Lynx Accessory Switch Kit provides a convenient way to independently power and control these accessories.
Product Usage Instructions
- Choose the desired location to mount the switch assembly using the included #6-32 x 1 screws.
- Connect the 4 pin receptacle on the switch assembly to the 4 pin plug on the accessory you want to power.
- Connect the 4 pin plug on the power supply to the 4 pin receptacle on the accessory.
- Ensure that the mounting location is close enough to the accessory for the two to connect properly.
- Mount the power supply bracket to the inside of the counter using appropriate screws based on the counter material.
- Plug the power supply into a wall socket.
Note: Refer to the connector identification provided in the user manual
for correctly identifying the 4 pin plug and receptacle.
For any further assistance or support, please contact Lynx Grills, Inc. at
Phone (888)289-5969 or visit their website at
www.lynxgrills.com.
Introduction
These instructions detail the electrical connections for Lynx Accessories to an independent power source for the following products:
- LSB1 Single Side Burner
- LSB2 Double Side Burner
- LSB2PC Double Side Burner with Prep Center
- LPB Power Burner
- LSBGE Grill Extender
- LSA30 Classic 30” Cabinet
- LSA36 Classic 36” Cabinet
- LSA42 Classic 42” Cabinet
- LPA36 Classic 36” Pantry
- LSA30-4 Ventana 30” Cabinet
- LSA36-4 Ventana 36” Cabinet
- LSA42-4 Ventana 42” Cabinet
- LPA36-4 Ventana 36” Pantry
- Lynx Accessory Switch Kit: Model LASK The Lynx Accessory Switch Kit is designed to power a Lynx accessory burner or storage accessory directly without a connection to a grill.
- The kit contains a power supply as well as a switch assembly with a mounting plate.
Installation Instructions
- Mount switch assembly in desired location using included #6-32 x 1” screws.
- Connect 4 pin receptacle on switch assembly to the 4 pin plug on the accessory.
- Attach power supply to mounting bracket using included #6-32 x ½” screws and #6-32 locknuts.
- Connect 4 pin plug on power supply to 4 pin receptacle on the accessory.
- After assuring that mounting location is close enough to the accessory for the two to connect, mount power supply bracket to the inside of the counter. Screws used for mounting will depend on counter material.
- Plug power supply into wall socket.
Precautions while working on electrical connections:
- Read and understand the instruction manuals provided with both the grill and accessory being installed.
- Review these instructions in their entirety before beginning.
- TURN OFF ALL GAS AT IT’S SOURCE to the appliances BEFORE beginning any electrical work. When working on an island installation, open any doors or drawers and allow the space to ventilate before beginning any work. Unplug the transformer / power supply from it’s receptacle under the island.
Connector Identification
Lynx Grills, Inc. 62201 HWY 82 West Greenwood, MS 38930 Phone (888)289-5969www.lynxgrills.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>