SEALEY AK2973 Micro Butane Heating Torch Instruction Manual

: June 12, 2024
: SEALEY

Table of Contents

SEALEY AK2973 Micro Butane Heating Torch
Product Information
Product Safety
Product Warranty
Product Usage Instructions
SAFETY
INTRODUCTION
OPERATION
ENVIRONMENT PROTECTION
Warranty
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY AK2973 Micro Butane Heating Torch

SEALEY-AK2973-Micro-Butane-Heating-Torch-product

Product Information

The Micro Butane Heating Torch, Model No: AK2973, is a high-quality product manufactured by Sealey. It is designed to provide trouble-free performance for years when used according to the instructions and properly maintained.

Product Safety

When using this equipment, it is important to adhere to Health & Safety, local authority, and general workshop practice regulations. The following safety precautions must be followed:

Always wear approved eye or face protection when operating the torch.
Handle the butane gas with care as it is extremely flammable.
Point the torch away from the eyes and body when igniting and during operation.
Ensure the Gas Controller Knob is firmly closed and the flame completely extinguished after use.
Do not puncture or dispose of the torch in a fire.
Avoid using the torch in areas where paint fumes, solvents, or other flammable materials are present.
Keep flammable materials away from the torch when operating.
Do not operate the torch when tired or under the influence of alcohol, drugs, or intoxicating medication.
Use clamps or a vice (not included) to secure the workpiece instead of holding it by hand.
Do not operate the torch if any parts are damaged or missing.
Avoid touching the workpiece close to the heated area as it will be very hot.
Avoid touching the burner tube during or immediately after use as it will be very hot.
Do not leave the torch operating unattended.
Avoid using the torch continuously for long periods.
Do not allow children to operate the torch.
Allow the torch to cool before storing it after use.
Observe cautions on the gas filler cartridge label.

Environment Protection

Recycle unwanted materials instead of disposing of them as waste. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Product Warranty

The product comes with a 12-month warranty from the purchase date. Proof of purchase is required for any warranty claims. Sealey reserves the right to alter data, specifications, and component parts without prior notice. It is important to use the product correctly as no liability is accepted for incorrect use.

Product Usage Instructions

To use the Micro Butane Heating Torch, please follow these instructions:

Step 1: Precautions

Ensure you are wearing approved eye or face protection before operating the torch.
Handle the butane gas with care as it is extremely flammable.
Always point the torch away from your eyes and body when igniting and during operation.
Make sure the Gas Controller Knob is firmly closed and the flame is completely extinguished after use.
Avoid using the torch in areas where paint fumes, solvents, or other flammable materials are present.
Keep flammable materials away from the torch while operating it.

Step 2: Operation

Secure the workpiece using clamps or a vice (not included) to avoid holding it by hand.
Check that all parts of the torch are intact and undamaged before use.
Ignite the torch according to the manufacturer’s instructions.
Direct the flame away from your body and eyes while operating.
After use, close the Gas Controller Knob firmly and allow the torch to cool before storing it.

Remember to observe the cautions on the gas filler cartridge label and follow proper disposal procedures for the product and any fluids used.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Warning

Refer to instruction manual
Wear eye protection
Wear protective gloves
Hot surfaces

SAFETY

WARNING

Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
Always wear approved eye or face protection when operating the torch.
Butane gas is extremely flammable, handle with care.
Always point the torch away from the eyes and body when igniting and during operation.
Ensure the Gas Controller Knob is firmly closed and the flame completely extinguished after use.
DO NOT puncture or dispose of in a fire.
DO NOT use the torch in an area where paint fumes, solvents or other flammable solids, liquids or gases pose a potential hazard.
Keep flammable material away from the torch when operating. Flammable waste, such as wiping or cleaning rags, must be placed in a closed metal container and disposed of correctly.
DO NOT operate the torch when you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT hold the workpiece by hand. Use clamps or a vice (not included) to secure the workpiece.
DO NOT operate the torch if any parts are damaged or missing as this may cause failure and/or possible personal injury.
DO NOT touch the workpiece close to the heated area as it will be very hot. Allow to cool.
DO NOT touch the burner tube during or immediately after use as it will be very hot. Allow to cool.
DO NOT leave the torch operating unattended.
DO NOT use this torch continuously for long periods.
DO NOT allow children to operate the torch.
After use, allow the torch to cool before storing it.
IMPORTANT: Observe cautions on the gas filler cartridge label.

INTRODUCTION

Professional micro design featuring piezoelectric ignition. Fitted with automatic safety lock. Unit produces flame of up to 1300°C and will operate for up to 45 minutes on a single fill.
Features adjustable flame control and continuous flame function. Powered by Butane (lighter fuel).

OPERATION

TO FILL

Use standard butane fuel. Fill in a well ventilated area away from open flame. Turn the torch off, make sure the flame is out, allow to cool down for five minutes before filling.
Hold torch upside down and insert the filling can’s nozzle into the gas filling valve. Press nozzle into the valve and release gas. Once gas begins to seep out around the edge of the nozzle, the gas tank is full. Remove the filling can.

TO USE

Push slide switch down to unlock trigger.(fig1.1)
Depress button this starts gas flow and operates ignition.(fig.1.2)
Depress blue/black button to lock trigger for a continuous flame. (fig.2.1)
Move Gas Volume Control Lever to vary flame strength, Volume ranges from 1 to 4. (fig.1.3)

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

REGISTER YOUR PURCHASE HERE

SEALEY-AK2973-Micro-Butane-Heating-Torch-fig-4

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

Important: No Liability is accepted for incorrect use of this product.