DIGITUS DN-10114 4 Port RJ45 Intel I350 Server NIC Installation Guide
- June 12, 2024
- DIGITUS
Table of Contents
DIGITUS DN-10114 4 Port RJ45 Intel I350 Server NIC
Introduction
The DN-10114 four port network card is the perfect solution for those who require a reliable and high-performance Gigabit Ethernet connection. With innovative power management features such as Energy Efficient Ethernet (EEE) and DMA Coalescing, it is particularly efficient and saves energy.
Through flexible I/O virtualization, the DN-10114 enables port partitioning
and quality of service (QoS) with up to 32 virtual ports. This provides great
flexibility and allows for optimal control of the network connection.
The DN-10114 also offers scalable iSCSI performance, ensuring cost-effective
SAN connectivity. The high-performing bridgeless design supports PCI Express
Gen 2.1 5GT/s and provides reliable Gigabit Ethernet technology from Intel
Corporation.
The network card is powered by the reliable Intel NHI350AM4 controller and provides a transmission rate of 10/100/1000 Mbps per port. It supports various network standards including 10BASE-T Cat3/4/5/5E/6, 100BASE-Tx Cat5/5E/6, and 1000BASE-T Cat5E/6. Jumbo frames support up to 9.5 KB ensures efficient data transfer.
With an operating temperature range of 0 °C to 55 °C (32 °F to 131 °F), the DN-10114 can be used in many different environments. It features LED indicators for different transmission speeds and is powered by a PCI Express power supply (+12V±8% / +3.3V±9%).
The DN-10114 is compatible with a variety of operating systems including
Windows Server 2003 / 2008 /2008 R2 / 2012 /2012 R2 /2016 R2, Windows XP /
Vista / 7 / 8 / 8.1 / 10, Linux Stable Kernel version 2.4.x / 2.6.x / 3.x /
4.x or later, Linux SLES 10 / 11 or later.
If you require a reliable, efficient, and high-performance network connection,
the DN-10114 4 port network card is the perfect solution for you.
Main Features
-
Halogen-free quad-port Gigabit Ethernet adapters with 4 RJ 45 Ports
-
Innovative power management features including Energy Efficient Ethernet (EEE) and DMA Coalescing for increased efficiency and reduced power consumption.
-
Flexible I/O virtualization for port partitioning and quality of service (QoS) of up to 32 virtual ports
-
Scalable iSCSI performance delivering cost-effective SAN connectivity.
-
High-performing bridgeless design supporting PCI Express* Gen 2.1 5GT/s.
-
Reliable and proven Gigabit Ethernet technology from Intel Corporation
-
Controller: Intel NHI350AM4
-
Transmission Rate Per Port: 10/100/1000 Mbps
-
Network Standard Physical Layer Interfaces:
10BASE-T Cat3/4/5/5E/6: 100m most
100BASE-Tx Cat5/5E/6: 100m most
1000BASE-T Cat5E/6: 100m most -
Jumbo Frame Support: Up to 9.5 KB
-
Operating Temperature: 0 °C to 55 °C (32 °F to 131 °F)
-
Boot Option and Virtualization: PXE support, Intel® VT-c
-
LED Indicators:
1000Mbps: Yellow and Green Blinking
100Mbps: Green and Green Blinking
10Mbps: Not illuminate. -
Power Supply: PCI Express +12V±8% / +3.3V±9%
-
SYSTEM SUPPORT: Windows Server 2003 / 2008 /2008 R2 / 2012 /2012 R2 /2016 R2, Windows XP / Vista / 7 / 8 / 8.1 / 10, Linux Stable Kernel version 2.4.x / 2.6.x / 3.x / 4.x or later, Linux SLES 10
Package Contents
- 1 x PCIe Network card
- 1 x User’s Manual
- 1 x CD Driver
- 1 x Low profile bracket
Requirements
Hardware
The following system specs are recommended minimum.
Available PCI Express x4/x8/x16 slot
Cabling
For 1000BASE-T OR 100BASE-TX.use Category 5 or Category5e wiring, twisted
4-pair copper:
Make sure you use Category 5 cabling that complies with the TIA-568 wiring
specification Length is 100 meters max. Category 3 wiring supports only
10Mbps.
Software
Operating systems supported:
- FreeBSD, Linux
- VMWare ESXi
- Win7, Win8, Win8.1/Win10
- Win-server2012, Win-server2008, Win-server2016
Hardware Installation
- Turn Off the power to your computer.
- Unplug the power cord and remove your computer’s cover.
- Remove the slot bracket from an available PCIe x4/x8/X16 slot.
- To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
- Replace the slot bracket’s holding screw to secure the card.
- Replace the computer cover and reconnect the power cord.
Driver Installation
Installation for Windows
You must have administrative rights to the operating system to install the
drivers.
- Insert the CD driver bound with Intel network driver into your CD- ROM drive.
- If the „Found New Hardware “Wizard screen is displayed, click Cancel.
- Start the autorun located in the software package, the autorun may automatically start after you have extracted files.
- Click install Drivers and Software
- Follow the instructions in the install wizard to finish it.
Installation for Linux
- Insert the provided CD into your CD-ROM drive.
- Compile the driver module.
- Install the module using the mod probe command.
- Assign an IP address using the ipconfig command.
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>