HUDORA 14235 BigWheel Style 230 Scooter Schwarz Instruction Manual

HUDORA 14235 BigWheel Style 230 Scooter Schwarz

CONGRATULATIONS ON PURCHASING THIS PRODUCT!

Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires specific skills and knowledge to be able to avoid injuries due to crashes and collisions. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

• Item: HUDORA BigWheel® Style 230
• Item number: 14235, 14236
• Dimensions: approx. 100 cm in length, deck. approx. 35 x 14 cm
• Product weight: approx. 5.2 kg
• Class: A, 120 kg maximum user weight
• Maximum height: 1065 mm
• Purpose: Leisure scooter for use in public areas, no toy.

If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

CONTENTS

• 1 x scooter | 1 x these instructions
• Other parts which may be included with the delivery in some circumstances are not required.

SAFETY INSTRUCTIONS

• For your own safety, make sure you wear suitable protective clothing. Wear personal protective equipment! This includes at least: hand/wrist protection, knee protection, head protection, and elbow protection. Never use the scooter without sturdy shoes.
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e.those which are flat, clean, and dry, and use the scooter where possible away from other road users. Avoid sloping ground. The brake may become hot if the scooter has been used for a while! Your footwear could be damaged! The brake shouldn’t be touched until it has cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts are intact and tight, e.g. the folding mechanism and the height setting of the handlebar. The functions of self-securing screwthreads can be impaired after repeated loosening and tightening of the connecting elements. Check especially for the correct alignment and fastening of the steering set-up.
• Make sure that the stand is folded safely while driving.
• Do not use the scooter at twilight, at night, or in poor visibility.
• Do not use it on roads or thoroughfares or on slopes or hills.
• Avoid being in the proximity of stairs and open water.
• The scooter is not suitable for jumps.
• Prior to using the scooter, please inform yourself about restricting applicable traffic regulations for the intended area of application.
• The use of the product requires specific skills and knowledge to be able to avoid injuries due to crashes and collisions.
• Children should only use the product when they are under adult supervision.
• Ensure when riding that the logo on the handlebar points to the front or else that the push buttons is as such oriented backward.

INSTRUCTIONS ON ASSEMBLY

• No tools are required to assemble the product. The scooter is delivered in its transport form (folded)! (Picture 1)

PLEASE PROCEED AS FOLLOWS TO GET THE SCOOTER READY FOR USE

• Pull the lever that is in the direction of movement, located to the right of the folding mechanism, in order to release the transportation lock. (Picture 2)
• Unfold the scooter‘s handlebars upwards.
• Now push the folding hinge towards the handlebar stem until you hear it click into place. (Picture 3)
• Loosen the quick-release fastener on the T-piece of the handlebar shaft by pushing the lever away from the T-piece. (Picture 4). Insert the handlebar grips in the T-piece of the handlebar grip. Use your thumbs to press down both locking buttons until the grips can be easily pushed into the T-section. Turn the handlebar grips until the locking buttons are positioned in the two openings intended for them and you hear them click in place. Check that both handlebar grips are fitted correctly by pulling both outwards. Do not let the two hand grips move out of their locking mechanism, once they are fitted properly. Now close the quick-release fastener on the T-piece of the handlebar shaft, by inserting the lever into the T-piece. In case the grips are not firmly fitted enough, open the quick-release fastener again and turn the screw on the opposite side deeper into the thread, so that the fastening clamp tightly sits on the T-piece.
• Loosen the quick-release lock on the handlebar rod by pushing the lever of the quick-release lock until the lever is parallel to the handlebar grip. (Picture 5)
• The handlebars can be locked into place at 4 different heights. Pull the handlebar rod out of the handlebar stem until it is at the required height and the relevant button has snapped into place. (Picture 6) The maximum height cannot be exceeded due to the integrated lock.
• Now close the quick-release lock by pushing the lever down to the handlebar stem. (Picture 5)
• In the event that the handlebar does not sit tight enough at the selected height, open the quick-release fastener again and turn the screw on the opposite side deeper into the thread, so that the fastening clamp tightly sits on the handlebar. Repeat this process until the handlebar can be securely adjusted.
• Before using, always check that all parts are firmly fixed, particularly the folding mechanism, steering lock, and wheels.

TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,

PLEASE CARRY OUT THE FOLLOWING ACTIONS

• Loosen the quick-release lock by pushing the lever of the quick-release lock away from the handlebar stem. (Picture 5)
• Please press the locking button so that the handlebar rod can be moved. (Picture 6)
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick-release lock by pushing the lever down to the handlebar stem. (Picture 5)
• Loosen the quick-release fastener on the T-piece of the handlebar shaft by pushing the lever away from the T-piece.
• Use your thumbs to press both locking buttons in the handlebar grips and pull the handlebar grips outwards until they are released completely from the T-section. (Picture 4)
• Press the handlebar grips far down until they are parallel to the handlebar shaft and can be pressed it into the appropriate supports.
• Now close the quick-release fastener on the T-piece of the handlebar shaft, by placing the lever around the T-piece.
• Pull the lever that is in the direction of movement, located to the right of the folding mechanism, in order to release the assembly lock. (Picture 2)
• Fold up the scooter by moving the handlebar rod towards the back wheel until you hear the transport lock click into place. (Picture 1)

USAGE INSTRUCTIONS

NOTHING’S EASY AT FIRST …
… most accidents happen to “beginners” within the first ten minutes. Particular care should be taken during this stage.
DRIVING INSTRUCTIONS
The scooter moves when a foot is used to regularly push off, just as with well-known children’s scooters. Braking is no problem either – simply step on the friction brake over the back wheel (mudguard). We recommend folding the scooter by hand after each ride or using the double stand located under the running board. Its use is ensured through simply folding and unfolding. Aluminium is a good and light material but should also be handled carefully as it is not as hard as steel, for example.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use the original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used anymore. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone. Replace damaged or worn assembly parts in order to ensure the safety of your scooter.

WHEEL CHANGE

Replacement wheels are available as accessories from http://www.hudora.de/ and should be replaced when they are worn down. To change the wheels, loosen the axle fitting with two Allen keys and take the wheels off the axle. A screwdriver or Allen key can be used to push the bearings out of the wheel to use them in the new wheel. However, it is usually advisable to change the bearings when the wheels are changed. Put the bearings into the new wheel with the bolt spacer and mount them to the frame with the axle screws. Make sure the axle has been screwed on tightly before starting again!

BEARINGS
Your kick scooter is equipped with precision ball bearings, which were filled with grease under high pressure, during manufacture. For this reason, the rollers of the kick scooter only run lightly and swiftly, while under load. Bearings are maintenance-free, but they are worn parts. Caution! Worn bearings make conspicuous audible noises and their function is constrained. In order to maintain optimal riding pleasure and to ensure lasting safety, you should replace bearings, as soon as they begin to exhibit signs of being worn. In the case of full load and daily use, we recommend the replacement of the rollers and bearings twice a year. Bearings are available as accessories under http://www.hudora.de/.

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise, however, we put just as much effort into rectifying them. Therefore, you can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

SPARE PARTS AND ORIGINAL
ACCESSORIES AVAILABLE AT:  http://www.hudora.de/

References

• HUDORA® Sport und Freizeitartikel » Zum Online-Shop
• HUDORA® Sport und Freizeitartikel » Zum Online-Shop
• HUDORA® Sport und Freizeitartikel » Zum Online-Shop

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>