LASER 6563 Cambelt Tool Kit for Renault or Dacia or Nissan Petrol Instructions
- June 12, 2024
- Laser
Table of Contents
LASER 6563 Cambelt Tool Kit for Renault or Dacia or Nissan Petrol
Introduction
- The 6563 kit contains the essential camshaft, crankshaft, and guide pulley tools for the 1.4/1.6 DOHC Renault-developed petrol engines listed below. The K4J and K4M engine codes are found across the Renault and Dacia ranges.
- The following instructions are for guidance only. Please refer to OEM-derived data such as the vehicle manufacturers’ own data or Autodata.
- The use of these engine timing tools is the user’s responsibility and Tool Connection cannot be held liable for any damage caused whatsoever.
Components
| Ref. | Code | OEM Ref. | Description |
|---|---|---|---|
| A | C120 | MOT 1496 | Camshaft Setting Bar |
| B | C126 | MOT 1490-01 | Camshaft Pulley Alignment Tool |
| C | C402 | MOT 1750 | Mounting Bracket for A |
| D | C037 | MOT 1489 | Crankshaft Timing Pin |
| E | C264 | MOT 1368 | Guide Pulley Wrench |
Belt Timing Numbers
| INA | Contitech | Gates |
|---|---|---|
| INA 530 0092 10 | CT1179K1 | K015671XS |
Instructions
Applications
| Make | Model | Years | Engine Code |
|---|---|---|---|
| Dacia | Duster 1.6 16V | 2010-2015 | 1.4 |
K4J 710
K4J 712
K4J 713
K4J 714
K4J 730
K4J 732
K4J 740
K4J 750
K4J 770
K4J 780
| 1.6
K4M 606
K4M 690
K4M 696
K4M 697
K4M 700
K4M 701
K4M 704
K4M 706
K4M 708
K4M 710
| |
Logan 1.6 16V| 2006-2011| K4M 714
K4M 742
K4M 743
K4M 744
K4M 745
K4M 748
K4M 750
K4M 752
K4M 753
K4M 788
| K4M 830
K4M 834
K4M 848
K4M 850
K4M 856
K7M 710
Nissan| Kubistar 1.6 16V| 2003-2009
Renault
| Clio Mk II 1.4 16V| 1999-2009
Clio Mk II 1.6 16V| 1998-2014
Kangoo 1.6 16V| 2001-2015
Laguna 1.6 16V| 1997-2007|
Logan 1.6 16V| 2006-2011|
Megane 1.4 16V| 1999-2009|
Megane 1.6 16V| 1999-2015| | | |
Modus/Grand Modus| 2004-2013| | | |
Scénic| 1999-2009| | | |
Thalia| 2000-2008| | | |
Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, property, or equipment when using the tools. Incorrect use will also invalidate the warranty. If applicable, the applications database and any instructional information provided have been designed to offer general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognized authority such as Autodata. It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and information prior to their use.
- www.lasertools.co.uk
- Distributed by The Tool Connection Ltd
- Kineton Road, Southam, Warwickshire CV47 ODR
- T +44 (0) 1926 815000 F +44 (0) 1926 815888
- info@toolconnection.co.uk
- www.toolconnection.co.uk
Guarantee
If this product fails through faulty materials or workmanship, contact our service department direct on: +44 (0) 1926 818186. Normal wear and tear are excluded as are consumable items and abuse.