V I V O MOUNT-TV01LB Loft Bed TV Mount Instruction Manual
- June 12, 2024
- V I V O
Table of Contents
V I V O MOUNT-TV01LB Loft Bed TV Mount
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
-
Assemble VESA Brackets (C) to VESA Plate (B) in the appropriate configuration to fit your TV’s VESA pattern using M6x12mm Carriage Bolts (S-D) and M6 Nuts (S-C). Tighten using Wrench (T-A).
NOTE: For 200x200mm and lower, do not use VESA Brackets (C).
-
OPTION A: Flat Back Monitor
For flat back monitors, assemble VESA Plate (B) with VESA Brackets (C) using M6x14mm Screws (M-A) or M8x16mm Screws (M-B) with M8 Washers (M-E) and a Phillips screwdriver.
OPTION B: Curved Back Monitor
For curved back monitors, assemble VESA Plate (B) with VESA Brackets (C) using M6x30mm Screws (M-C) or M8x35mm Screws (M-D) with M8 Washers (M-E) and Spacers (M-F and/or M-G). Tighten using a Phillips screwdriver.
-
Place Hanger (A) onto VESA Plate (B) at the desired height.
-
Assemble Hanger (A) to VESA Plate (B) using M6 Nuts (S-C) and Wrench (T-A).
-
Thread Clamp Screws (S-A) into Hanger (A). Place Screw Caps (S-B) on the ends of Clamp Screws (S-A).
OPTIONAL: Pads (D) have been provided for mounting locations where Hanger (A) will touch or rest against a hard surface when mounted. Peel and remove backing from Pads (D) and install on back of Hanger (A) above both sets of screws, as shown above. -
Place Hanger (A) over loft bed frame and tighten Clamp Screws (S-A) to secure the assembly in place.
NOTE: Max clamping thickness is 1.25” (32mm).
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
www.vivo-us.com AVG. RESOLUTION TIME (within office
hrs): < 15 M
Chat live with an agent!
309-278-5303 AVG. RESOLUTION TIME
(within office hrs): 5M 4S
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-tv01lb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Loft Bed TV Mount – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>