CRYSTORAMA 8682-MT-GA Two Light Wall Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 8682-MT-GA Two Light Wall Mount
Product Information
- Model Number: 8682-MT-GA
- Product Name: Wall Fixture
- Recommended Bulb Type: Candelabra Bulb
- Recommended Wattage: 40 Watts
- Maximum Wattage: 60 Watts
Dimensions
- Mounting Plate: 5x5x0.9 inches
- Metal Shade: 11.5×5.5×6 inches
- Chain: 20.7 inches long, 8.0mm thick
Product Warning: This product may contain Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Product Usage Instructions
- Determine the position on the wall where you want to affix the fixture.
- Mark two points on the wall with the same distance as the holes on the back plate.
- Drill two holes in the wall at the marked points and insert the anchors into the holes.
- Attach the mounting plate onto the wall using the anchor screws.
- Attach the back plate onto the mounting plate.
- Install the chain to the bottom of the junction box.
- Install the recommended bulbs (2-Candelabra Bulbs, not included) into the sockets.
Please note that all electrical components must be installed by a licensed
electrician in accordance with the National Electric Code and the appropriate
local electrical codes.
For any further assistance or inquiries, please refer to the provided Part
Numbers and contact our customer support.
Part Numbers
-
A. Mounting Hardware: (1) Mounting Plate, (2) Wire Nut, (2)
Anchor Screws, (4) Screws -
B. Back Plate: 5x5x0.9 inches
-
C. Socket: 2 pieces
-
D. Metal Shade: 11.5×5.5×6 inches
-
E. Chain: 20.7 inches long, 8.0mm thick
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>