rizoma LBX152 Adjustable Plus Brake Levers User Manual
- June 12, 2024
- rizoma
Table of Contents
- rizoma LBX152 Adjustable Plus Brake Levers
- Product Information
- General Conditions
- Product Usage Instructions
- Product Details
- Installation of Rear Brake Lever (Part Number: LBX152)
- Installation of Front Brake Lever (Part Number: LBX152)
- INSTALLATION INSTRUCTION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
rizoma LBX152 Adjustable Plus Brake Levers
Product Information
Welcome to Rizoma! This user manual provides important information and instructions for the proper installation and usage of Rizoma products. Please read and follow these instructions carefully to ensure the safety and optimal functioning of your product.
General Conditions
- Read and follow these instructions carefully as they are an essential part of the product. If you have any doubts regarding the installation or usage of your RIZOMA product, please contact an authorized RIZOMA dealer for assistance.
- For correct installation, all tightening must be done after positioning the accessories correctly. Avoid forcing the moving parts once they are locked to prevent compromising the product’s integrity and proper functioning.
- Rizoma products may not be compatible with your motorcycle or other aftermarket accessories previously installed. For your safety, Rizoma recommends always contacting an authorized RIZOMA dealer.
Product Usage Instructions
- After installing any Rizoma product, check that all related components of the motorbike function properly, including brakes, throttle, clutch, lights, and steering. It is strongly suggested to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
- Your RIZOMA products require regular inspection and maintenance. The more you ride, the more often you should inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped, or worn, even slightly, immediately have a RIZOMA dealer inspect them before riding again. Never attempt to repair or modify Rizoma products or their components; always replace them with Rizoma original components.
Note: Descriptions preceded by this symbol contain information, instructions, or procedures that, if not followed, may result in death or serious injury.
Product Details
- Product Name: Kit leve freno (Brake levers kit)
- Part Number: LBX152
- Difficulty Level: Easy
- Time of Assembly: 25-30 minutes
Installation of Rear Brake Lever (Part Number: LBX152)
- Refer to the part list to ensure the completeness of the kit.
- Ensure the lever is not broken or damaged. If it is, immediately replace it.
- Follow the provided steps to install the rear brake lever:
- Step 1: Install the rear brake lever using the provided instructions.
Installation of Front Brake Lever (Part Number: LBX152)
- Refer to the part list to ensure the completeness of the kit.
- Ensure the lever is not broken or damaged. If it is, immediately replace it.
- Follow the provided steps to install the front brake lever:
- Step 1: Install the front brake lever using the provided instructions.
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country
Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
- Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
- Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
- Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
- O.E.M.: original equipment manufacturer.
Before you start mounting the product please check the completeness of the kit
on the part list. The difficulty level and the time of assemblage shown do not
include the removal of OEM components. Warning: Make sure that your motorbike
is standing firmly before you start work, as a fall may lead to damage to the
motorbike or injury to you or others. WARNING: TO CLEAN YOUR PRODUCT DON’T USE
DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH
YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
Improper installation of lever could adversely affect performance of brakes or
clutch, resulting in an accident, personal injury or death. Your lever is
equipped with a safety ball at the end to prevent impalement in the event of a
crash. Never ride if the lever is broken or otherwise damaged in any way.
Immediately replace the lever.
INSTALLATION INSTRUCTION
- INSTALL REAR BRAKE LEVER
- **INSTALL FRONT BRAKE LEVER
**
- **ADJUSTMENT BRAKE LEVER
**
- **SUBSTITUTION O-RING
**
WARNING
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries
where homologation is required. Thus RIZOMA® srl declines any responsibility
for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>