SYNCO Wair-G1-A2 Two Person Digital Wireless Microphone User Manual

SYNCO Wair-G1-A2 Two Person Digital Wireless Microphone

Product Information

The Microphone G1(A2) is a wireless microphone system manufactured by SYNCO. It consists of a TX Transmitter, an RX Receiver, and various accessories. The system operates on a digital 2.4GHz wireless transmission and has a working distance of up to 164ft/50m in LOS (line-of-sight) areas and 98ft/30m in NLOS (non-line-of-sight) areas. The microphone system features a pocket clip for easy attachment, a 3.5mm TRS mic input, and a built-in lithium battery for power.

The TX Transmitter has an external mic input, USB-C port for charging, power button, reset function, low cut function, pairing indicator, built-in mic, and a pocket clip. The RX Receiver includes a USB-C port for charging, power button with a mono/stereo switch, a reset function, channel A and B gain control, a 3.5mm audio output, a 3.5mm monitoring jack, a pocket clip, a pairing indicator, and power indicator.

The product package includes a mic windshield, RX receiver, two TX transmitters, carrying bag, eject pin, 3-in-1 charging cable, two external lav mics with wind muff, 3.5mm TRRS phone cable, and a 3.5mm TRS camera cable.

Product Usage Instructions

1. Power Button: Long press the power button for 2 seconds to turn on/off the system. Short press the power button on the RX for the Mono/Stereo switch.
2. Pairing: The system will pair automatically after power on. If you need manual pairing, long press channel A to gain control and channel B to gain control on the RX, and the pairing button on the TX, the system will start to pair.
3. Connection: Connect the receiver to recording devices using a 3.5mm TRRS Phone Cable or a 3.5mm TRS Camera Cable, depending on your device.
4. Installation: Attach the transmitter or the external mic to the speaker’s clothing. Install the receiver to the camera’s hot shoe using the pocket clip. Make sure to properly insert the external mic into the mic input when using it.
5. Gain Control: The initial gain level is set to the microphone’s original volume. Each press of the gain control button increases the gain by one level, up to a maximum of four levels. When the gain is at the maximum level, pressing the button once will return it to the initial value.
6. Charging: Before use, fully charge the TX and RX using the USB-C port and the provided charging cable.

Specifications:

TX Transmitter:

• Wireless Transmission: Digital 2.4GHz
• RF Frequency Band: 2400-2483.5MHz
• Working Distance: Up to 164ft/50m (LOS area), 98ft/30m (NLOS area)
• Latency: 12.5ms
• Mounting: Pocket Clip
• Audio Input: 1/8 / 3.5 mm TRS Mic Input
• Audio Input Level: 1V (0dBV)
• RF Output Power: 10mW
• Power Requirements: 3.3V-4.7V, Built-in Lithium Battery
• Battery Charging Time: 1.5 hours
• Battery Life: Up to 8 hours
• Dimensions: 52X42X16mm
• Material: Plastic
• Weight: 35g

RX Receiver:

• Wireless Transmission: Digital 2.4GHz
• RF Frequency Band: 2400-2483.5MHz
• Approximate RF Sensitivity: -81dBm
• Working Distance: Up to 164ft/50m (LOS area), 98ft/30m (NLOS area)
• Latency: 12.5ms
• Mounting: Pocket Clip
• Number of Audio Channels: 2
• Audio Output: 1/8 / 3.5 mm TRS Mic Output, 1/8 / 3.5 mm TRS Headphone Output
• Gain: 0-4 Level (0 to 8dB)
• Audio Output Level: Line Out: 1V, Monitoring: 25-30mW
• Power Requirements: 3.3V-4.7V, Built-in Lithium Battery, 400mAh
• Battery Charging Time: 1.5 hours
• Battery Life: Up to 8 hours
• Dimensions: 52X42X16mm
• Material: Plastic
• Weight: 35g

Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your SYNCO Product

• Please keep the product in a dry, clean, dust-free environment.
• Keep corrosive chemicals, liquids and heat sources away from the product to prevent mechanical damage.
• Use only a soft and dry cloth for cleaning the product.
• Malfunctions may be caused by dropping, the impact of external force.
• Do not attempt to disassemble the product. Doing so voids the warranty.
• Please have the product checked or repaired by authorized technicians if any malfunctions happened.
• Failure to follow all the instructions may result in mechanical damage.
• Warranty does not apply to human errors.

Package List

Product Instruction

TX Transmitter

1. External Mic Input
2. USB-C Port
3. Power
4. Reset(Help with Eject Pin)
5. Low Cut
6. Pairing
7. Built-in Mic
8. Pocket Clip
9. Pairing Indicator
10. Power Indicator

RX Receiver

1. USB-C Port
2. Power(Mono/Stereo Switch)
3. Reset(Help with Eject Pin)
4. Channel A Gain Control
5. Channel B Gain Control
6. 3.5mm Audio Output
7. 3.5mm Monitoring Jack
8. Pocket Clip
9. Pairing Indicator
10. Power Indicator

Indicator

Operations

1. Power Button
   Long press the power button for 2 seconds to turn on/off the system. Short press the power button on the RX for Mono/Stereo switch.

2. Pairing
   The system will pair automatically after power on. If you need manual pairing, long press the channel A gain control and channel B gain control on the RX, and the pairing button on the TX, the system will start to pair.

3. Connection
   The receiver outputs audio signals to recording devices with a 3.5mm TRRS Phone Cable or a 3.5mm TRS Camera Cable. Please use the corresponding cable based on your device.

4. Installation
   Attach the transmitter or the external mic to the speaker’s clothing. Install the receiver to the camera’s hot shoe via the pocket clip. (Note: When using the external mic, please insert it into the mic input properly.)

5. Gain Control
   The initial value of the gain is the microphone’s original volume. Each press of the gain control button increases the gain by one level, fourth level at most. When the gain is at max level, press once and return to initial value.

6. Charging
   Please fully charge the TX and RX via the USB-C port and the charging cable before use.

Specifications

TX Transmitter

• Wireless Transmission Digital 2.4GHz
• RF Frequency Band 2400-2483.5MHz
• Working Distance 164ft/50m (LOS area), 98ft/30m (NLOS area)
• Latency 12.5ms
• Mounting Pocket Clip
• Audio Input 1/8″ / 3.5 mm TRS Mic Input
• Audio Input Level 1V (0dBV)
• RF Output Power ＜10mW
• Power Requirements 3.3V-4.7V
• Battery Type Built-in Lithium Battery
• Battery Charging Time 1.5H
• Battery Life 8H
• Dimensions 52X42X16mm
• Material Plastic
• Weight 35g

RX Receiver

• Wireless Transmission Digital 2.4GHz
• RF Frequency Band 2400-2483.5MHz
• Approximate RF Sensitivity -81dBm
• Working Distance 164ft/50m (LOS area), 98ft/30m (NLOS area)
• Latency 12.5ms
• Mounting Pocket Clip
• Number of Audio Channels 2
• Audio Output
  • 1/8″ / 3.5 mm TRS Mic Output
  • 1/8″ / 3.5 mm TRS Headphone Output
• Gain 0-4 Level (0 to 8dB)
• Audio Output Level Line Out: 1V, Monitoring: 25-30mW
• Power Requirements 3.3V-4.7V
• Battery Type Built-in Lithium Battery, 400mAh
• Battery Charging Time 1.5H
• Battery Life 8H
• Dimensions 52X42X16mm
• Material Plastic
• Weight 35g

Microphone

• Form Factor Built-in/External Mic
• Sound Field Mono
• Polar Pattern Omnidirectional
• Frequency Range 50Hz-20KHz
• Sensitivity -40dB (±3 dB, re 1V/Pa at 1KHz)
• Maximum SPL 135dB SPL (at 1KHz)

Warranty

Warranty Period
Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of the quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
2. Original SYNCO products are entitled to a 12-month limited warranty service. The warranty period begins on the date of purchase of brand-new, unused products by the first end-user.

Within the warranty period, if a product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

• Faults resulted from inappropriate use of a product without following its operation specification
• Artificial damage, e.g. crash, squeeze, scratch, or soaking
• Modifications to a product by its user or a third party without the prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
• The code on the product is inconsistent with that of the warranty certificate, or the code on the product or warranty certificate is altered or torn off
• All consumable accessories attached to a product, like a cable, wind muff, battery
• Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

• If failure or any problem occurs with your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at [email protected].
• Please retain your sales receipt and warranty certificate as proof of purchase.
• If any of these documents are missing, only sales returns or chargeable services will be provided.
• If the SYNCO product is out of warranty coverage, the service and the cost of the parts will be charged.

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcome to contact us via Email: [email protected].

USER INFORMATION

• Customer Name:
• Phone Number:
• Email:
• Address:

SALES INFORMATION

• Sales Date:
• Model:
• Product Code:
• Dealer:

REPAIR RECORD

• Service Date:
• Technician:
• Issue:

RESULT

• Solved
• Unsolved
• Returned (Replaced)

Guangzhou Zhiying Technology Co., Ltd

• Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
• [email protected]
• www.syncoaudio.com
• https://www.facebook.com/syncomicrophones.

References

• SYNCO | Branded Microphone Manufacturer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>