STIHL AR 2000 L Professional Battery Power at your Fingertips Instruction Manual

STIHL AR 2000 L Professional Battery Power at your Fingertips

Introduction

Dear Customer,

Thank you for choosing STIHL. We develop and manufacture our quality products to meet our customers’ requirements. The products are designed for reliability even under extreme conditions.
STIHL also stands for premium service quality. Our specialist dealers guarantee competent advice and instruction as well as comprehensive service support.
We thank you for your confidence in us and hope you will enjoy working with your STIHL product.

Dr. Nikolas Stihl

IMPORTANT: READ BEFORE USE AND KEEP IN A SAFE PLACE

Guide to Using this Manual

Applicable Documentation

Local safety regulations apply.

► Read, understand and save the following documents in addition to this instruction manual:

• Instruction manual of STIHL cordless product being used.
• Instruction manual for STIHL AL 300, 500 chargers
• Safety information for STIHL batteries and products with built-in batteries: www.stihl.com/safety-datasheets

For further information on STIHL connected, compatible products and FAQs visit https://connect.stihl.com/ or contact a STIHL servicing dealer.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. These word mark/logos are used by STIHL under license.

The battery is equipped with a Bluetooth® radio interface.
Local operating restrictions (in aircraft or hospitals, for example) must be observed.

Symbols used with warnings in the text

WARNING

This symbol indicates dangers that can cause serious injuries or death.

► The measures indicated can avoid serious injuries or death.

NOTICE

This symbol indicates dangers that can cause damage to property.

► The measures indicated can avoid damage to property

Symbols in Text

This symbol refers to a chapter in this instruction manual.
A video is available for this chapter

Overview

Battery

1. Battery
   Supplies power to the STIHL cordless product.

2. Handle
   Serves to carry the battery.

3. Socket
   Receptacle for cable’s plug.

4. Dust Cap
   Closes the USB port.

5. USB Port
   For connecting a USB cable or USB adapter.

6. Button
   Activates the LEDs and signal on battery. Activates and deactivates Bluetooth® radio interface.

7. LEDs
   Indicate battery charge status, malfunctions, activation and deactivation of Bluetooth® radio interface.

# Rating Label with Serial Number

Carrying System

The battery’s scope of supply does not include the carrying system.

1. Carrying System
   Distributes weight of battery over shoulders and holds the connecting cable.

2. Guide
   Keeps the connecting cable in position on carrying
   system.

3. Loop
   Keeps cable plug in position on carrying system.

4. Lever
   Secures battery to carrying system.

5. Slide
   Enables backpack to be adjusted to suit user’s height.

6. Fastener
   Keeps the connecting cable in position on carrying system.

Connecting Cable and AP Adapter

The battery’s scope of supply does not include the connecting cable or the AP adapter.

1. Connecting Cable
   Connects battery to a STIHL cordless product with socket or AP adapter.

2. Connector
   Connects cable to battery.

3. Connecting Cable Plug
   Connects the connecting cable to a STIHL cordless product with socket or the AP adapter.

4. AP Adapter
   Connects battery to a STIHL cordless product with a battery compartment for STIHL AP batteries.

Symbols

Meanings of symbols that may be on the battery:

1 LED glows red. Battery too hot or too cold.
4 LEDs flash red. There is a malfunction in the battery.
The battery has a Bluetooth® radio interface and can be connected with the STIHL app.
The data next to this symbol indicates the energy content of the battery according to the cell manufacturer’s specification. The energy content available during operation is lower.
Do not dispose of the product with your household waste

Safety Precautions

Warning Signs

Meanings of warning signs on the battery:

Observe safety notices and take the necessary precautions.
Read, understand and save the instruction manual.
Protect battery from heat and fire
Do not immerse battery in fluids
Observe battery’s permissible temperature range.

Intended Use

A STIHL AR L battery supplies the following STIHL cordless products with energy:

• Cordless product with socket.
• Cordless product with battery compartment for STIHL AP batteries.
• Cordless product with battery holder for STIHL AR L batteries.

The battery may be used in the rain.

The battery may be used only for work performed while standing on the ground or in a lift bucket.

The battery must not be used for cordless lawnmowers with a battery compartment for STIHL AP batteries.

During operation the battery on the carrying system is carried on the user’s back or connected to a cordless product as described in that product’s instruction manual.

The battery is recharged with a STIHL AL 300 or AL 500 charger.

Combined with the STIHL app, the battery allows the personalization and transmission of information to the battery using Bluetooth® technology.

WARNING

￭ Products and chargers not explicitly approved for the battery by STIHL may cause accidents, a fire or explosion. This can result in serious or fatal injuries and damage to property.

► Use the battery only with the following STIHL cordless products:

• Cordless product with socket.
• Cordless product with battery compartment for STIHL AP batteries.
• Cordless product with battery holder for STIHL AR L batteries.

► Recharge the battery with a STIHL AL 300 or AL 500 charger.

￭ Using the battery for purposes for which it is not designed may result in serious or fatal injuries and damage to property.
► Use the battery as described in this instruction manual, the STIHL app and https://connect.stihl.com/.

The Operator

WARNING

￭ Users without adequate instruction cannot recognize or assess the risks involved in using the battery, carrying system, connecting cable and AP adapter. The user or other persons may sustain serious or fatal injuries.

► Read, understand and save the instruction manual.

► If you lend the battery, carrying system, connecting cable or AP adapter to another person: Always give them the instruction manual.
► If you have any queries: Contact a STIHL servicing dealer for assistance.
► Make sure the user meets the following requirements:

• The user must be rested.
• The user must be in good physical condition and mental health to operate and work with the battery, carrying system, connecting cable and AP adapter. If the user’s physical, sensory or mental ability is restricted, he or she may work only under the supervision of or as instructed by a responsible person.
• The user is able to recognize and assess the risks involved in using the battery, carrying system, connecting cable and AP adapter.
• The user must be of legal age or is being trained in a trade under supervision in accordance with national rules and regulations.
• The user has received instruction from a STIHL servicing dealer or other experienced user before using the battery, carrying system, connecting cable or AP adapter the first time.
• The user must not be under the influence of alcohol, medication or drugs.

Work Area and Surroundings

WARNING

￭ Bystanders, children and animals cannot recognize or assess the dangers of the battery, carrying system, connecting cable and AP adapter. Bystanders, children and animals may be seriously injured.
► Keep bystanders, children and animals away from the work area.
► Do not leave the battery unattended.
► Make sure that children cannot play with the battery, carrying system, connecting cable or AP adapter.

￭ The battery is not protected against all ambient conditions. If the battery is exposed to certain ambient conditions, it may catch fire or explode. This can result in serious injuries and damage to property.

► Protect battery from heat and fire.
► Do not throw the battery into a fire.

► Use and store the battery at temperatures between – 10°C and +50°C

► Do not immerse battery in fluids.

► Keep battery away from metallic objects.
► Do not expose battery to high pressure.
► Do not expose battery to microwaves.
► Protect battery from chemicals and salts.

Safe Condition

The battery, carrying system, connecting cable and AP adapter are in a safe condition if the following points apply:

• The battery, carrying system, connecting cable and AP adapter are not damaged.
• The battery, carrying system, connecting cable and AP adapter are clean and dry.
• Battery functions properly and has not been modified.
• The battery, carrying system, connecting cable and AP adapter have not been modified.
• Only original STIHL accessories designed for this battery and carrying system are fitted.
• Accessories are properly mounted.

WARNING

￭ A battery that is not in a safe condition cannot operate safely. This can result in serious injuries.
► Never work with a damaged battery.
► Never attempt to charge a damaged or defective battery.
► Work only with an undamaged carrying system, an undamaged connecting cable and an undamaged AP adapter.
► If the battery, carrying system, connecting cable or AP adapter is dirty or wet: Clean the battery, carrying system, connecting cable or AP adapter and allow to dry.
► Never modify the battery, carrying system, connecting cable or AP adapter.
► Never insert objects in any openings in the battery or AP adapter.
► Never bridge a battery’s or AP adapter’s contacts with metallic objects (short circuit).
► Do not open the battery.
► Only use original STIHL accessories designed for this battery and carrying system.
► Mount accessories as described in this instruction manual or the instructions supplied with the accessory.

￭ Fluid may escape from a damaged battery. The fluid can cause irritation if it contacts the skin or eyes.

► Avoid contact with the fluid.
► In case of contact with the skin: Wash affected areas with plenty of water and soap.
► In case of contact with the eyes: Rinse eyes with plenty of water for at least 15 minutes and seek medical advice.

￭ A damaged or defective battery may smell unusual, emit smoke or burn. This can result in serious or fatal injuries and damage to property.

► If the battery smells unusual or emits smoke: Take the battery off your back. Do not use the battery and keep it away from combustible substances.
► If the battery catches fire: Attempt to extinguish the battery with a fire extinguisher or water.

Contact with live components may occur for the following reasons:

• Connecting cable is damaged.
• Connecting cable plug or plug on battery damaged.
• The AP adapter is damaged.

WARNING

￭ Contact with live components can result in an electric shock. This can result in serious or fatal injuries.

► Make sure the connecting cable, its plug, the plug on the battery and the AP adapter are not damaged.

￭ Connecting cable can be damaged if it is not fitted properly. This can result in injuries and may damage the connecting cable.

► Position the connecting cable so that it cannot be touched by the tool of the cordless product being used.
► Position the connecting cable so that it cannot be kinked or damaged.
► If the connecting cable is twisted: Straighten it out.

Operation

WARNING

￭ The user cannot concentrate on the work in certain situations. The user may stumble, fall and be seriously injured.

► Work calmly and carefully.
► If light and visibility are poor: Do not work with the battery.
► Watch out for obstacles.
► Stand on the ground while working and keep a good balance. If it is necessary to work at heights: Use a lift bucket.
► If you begin to feel tired: Take a break.

￭ If you notice any change in the battery during operation, if it behaves unusually or there is a quick succession of short beeps, the battery may be in an unsafe condition. This can result in serious injuries and damage to property.

► Stop work, take the battery off your back and contact your STIHL servicing dealer.
► If the battery smells unusual or emits smoke: Take the battery off your back. Do not use the battery and keep it away from combustible substances.

￭ In an emergency, the user may panic and not put the carrying system down. This can result in serious injuries.

► Practice removing and putting down the carrying system.

Transporting

WARNING

￭ The battery is not protected against all ambient conditions. The battery may be damaged if it is exposed to certain ambient conditions and damage to property may occur.

► Never transport a damaged battery.
► Transport the battery in non-conductive packaging.

￭ The battery may turn over or shift during transport. This may result in personal injuries and damage to property.

► Pack the battery in packaging in such a way that it cannot move.
► Secure the packaging so that it cannot move

Storing

WARNING

￭ Children are not aware of and cannot assess the dangers of the battery and can be seriously injured.

► Store the battery out of the reach of children

￭ The battery is not protected against all ambient conditions. The battery may be damaged if it is exposed to certain ambient conditions.

► Store the battery in a clean and dry condition.
► Store the battery in an enclosed location.
► Store the battery separately from the battery product and charger.
► Store the battery in non-conductive packaging.
► Store the battery at temperatures between -10°C and +50°C.

￭ The connecting cable must not be used for carrying or hanging up the battery. The connecting cable and the battery may be damaged.

► Wind up the connecting cable and secure it to the battery.

Cleaning, Maintenance and Repairs

WARNING

￭ Aggressive cleaning agents, cleaning with a jet of water or pointed objects can damage the battery, carrying system, connecting cable and AP adapter. If the battery, carrying system, connecting cable and AP adapter are not cleaned correctly, components may no longer function properly or safety devices may be rendered inoperative. This can result in serious injuries.

► Clean the battery, carrying system, connecting cable and AP adapter as described in this instruction manual

￭ If the battery, carrying system, connecting cable and AP adapter are not serviced or repaired correctly, components may no longer function properly or safety devices may be rendered inoperative. This can result in serious or fatal injuries.

► Never attempt to service or repair the battery, carrying system, connecting cable or AP adapter.
► If the battery, carrying system, connecting cable or AP adapter need to be serviced or repaired: Contact a STIHL servicing dealer for assistance.

Preparing Battery for Operation

Preparing Battery for Operation

Perform the following steps before starting work:

► Check the LEDs and beeps, 6.3
► If 4 LEDs flash red and short beeps sound in quick succession: Do not use or transport the battery, contact your STIHL servicing dealer.
There is a malfunction in the battery.
► Fully charge the battery, 6.1
► Clean the battery, 17.1
► If you use the connecting cable:
► Clean contacts on the connecting cable, 17.2
► Fit the connecting cable or battery and connecting cable
on the carrying system. 8
► Make sure the battery is in a safe condition, 4.5.

► The battery, carrying system, connecting cable and AP adapter are used: Check that the carrying system, connecting cable and AP adapter are in a safe condition,  4.5.
► If you cannot carry out these steps: Do not use the battery and contact your STIHL dealer for assistance.

Connecting Battery to STIHL App

► Activate Bluetooth® radio interface on mobile device.
► Activate Bluetooth® radio interface on battery, 7.1.
► Download STIHL App from app store of your mobile device and create an account.
► Open and register STIHL App.
► Add the battery in the STIHL App and follow the instructions on the screen.

For contacts and other information visit  https://support.stihl.com/ or see information in the App.
The STIHL connected feature is available in the STIHL App in certain markets.

Charging the Battery, LEDS and Signals

Charging the Battery

The charging time depends on several factors, e.g.
temperature of the battery or the ambient temperature. The actual charging time may differ from the specified charging time. For specified charging times see www.stihl.com/charging-times.

The charging process starts automatically when the plug is inserted in a wall outlet and the AP adapter is fitted in the charger. The charger switches itself off automatically when the battery is fully charged.

The battery and charger become hot during the charging process.

The STIHL AL 300 and AL 500 chargers have a built-in fan which may cut in and out during the charging process.

► Fit the connecting cable, or battery and connecting cable, on the carrying system.

► Insert the plug (7) in a convenient wall outlet (8). The charger (5) runs a self test. The LED (4) glows green for about 1 second and then red for about 1 second.
► Fit the connecting cable (6).
► Insert the battery cable plug (1) in the socket (2) on the AP adapter (3).
► Insert the AP adapter (3) in the guides in the charger (5) and press it home as far as stop.
The LED (4) glows green. The LEDs on the battery glow green and the battery is charged.
► When the LED (4) and the LEDs on the battery stop glowing: The battery is fully charged. The AP adapter (3) can be taken out of the charger (5).

Displaying State of Charge

► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate the state of charge. There is a short beep.
► If the right-hand LED flashes green and there are six long beeps: Charge the battery.

LEDs and Beeps

The LEDs and beeps can indicate the following information about the battery:

• State of charge
• Activation and deactivation of Bluetooth® interface.
• Malfunctions

The LEDs can glow or flash green or red. The right-hand LED can also glow or flash blue. Beeps may be short or long. The state charge is indicated when the LEDs glow or flash green and there is a short beep.

► If the right-hand LED flashes green and there are four long beeps: Charge the battery.
► If the LEDs glow or flash red or there are no beeps: Rectify the malfunction. 19.1 There is a malfunction in the cordless product or battery.
► If the four right-hand LEDs on the battery flash red and short beeps sound in quick succession: Troubleshooting,  19.1.
There is a malfunction in the battery.

If the right-hand LED on the battery glows blue and there are three short beeps: The Bluetooth® radio interface on the battery is activated,   7.1.

If the right-hand LED on the battery flashes blue and there are three short beeps: The Bluetooth® radio interface on the battery is deactivated, 7.2.

Activating and Deactivating Bluetooth® Radio Interface

Activating the Bluetooth® Radio Interface

► Press the button and hold it depressed for about 3 seconds.
The right-hand LED glows blue for about 3 seconds. You will hear 3 short beeps. The Bluetooth® radio interface on the battery is activated.

Deactivating the Bluetooth® Radio Interface

► Press the button and hold it depressed for about 3 seconds.
The right-hand LED flashes blue six times. You will hear 3 short beeps.

Assembling the Battery

Fitting the Connecting Cable

► Position the connector (1) with the connecting cable facing up.
► Insert the connector (1) in the socket (2).

Fitting and Removing Battery and Cable on Carrying System

Fitting Battery and Cable on Carrying System

► Insert the connector (1).

► Position the battery (2) on the carrying system (3) so that the guides on the carrying system engage the recesses in the battery.

► Open the lever (4) and hold it there.
► Press the carrying system (3) against the battery (2) until the connector (1) locates against the socket (5).

► Swing the lever (4) down. It must snap into place.

Removing Battery and Cable from Carrying System

► Open the lever.
► Remove the battery.
► Remove the connector.

Adjusting Battery for User

Adjusting Carrying System to Suit User’s Height

The carrying system can be set to positions S, M or L to suit the user’s height.

► Depress the locking tab (1) and push it in direction of arrow.
► Remove the slide (2).

► Line up mark (3) with mark (4).
► Fit the slide (2).
► Pull the slide (2) up (in opposite direction to arrow). The slide (2) engages with a click.
► Set slide (2) to same position on left and right shoulder straps.

Fitting and Adjusting the Connecting Cable

The connecting cable can be fitted and adjusted to suit the user’s height, different cordless products and the application.

The connecting cable can be secured in position by the guide (1) on the harness and the fasteners (2), or on the side of the backplate with the fasteners (2).

The length of the connecting cable can be adjusted by making a loop on the battery (3) or at one side (4).

► Fit the connecting cable so that has no kinks and is as short as possible without hindering your work.

Fitting and Removing Harness

Fitting and Adjusting the Carrying System

► Put the battery on your back.
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.

► Tighten the straps until the waist belt fits snugly on your hips and the back padding is against your back.
► Thread the end of the waist belt through the loops (3 and 4).
Removing the Carrying System

► Loosen the straps.
► Open the buckles on the chest strap and waist belt.
► Take the battery off your back.

Testing the Battery

Checking LEDs and Beeps

► Press button on battery.
The LEDs glow green and a short beep sounds. The state of charge is indicated.
► If the right-hand LED flashes green and there are six long beeps: Charge the battery.
► If the LEDs do not glow or flash or there are no beeps: Do not use the battery and contact your STIHL dealer for assistance.
There is a malfunction in the battery.

Working with the Battery

Working with the Battery

A| | |
---|---|---|---
B| | |
C| | |
D| | |

A: If a cordless product with socket (1) is to be supplied with energy:
Use battery (5), carrying system (6) and connecting cable (7). The battery is carried on the carrying system as a backpack.
B: If a cordless product with battery compartment for STIHL AP batteries (2) is to be supplied with energy:
Use battery (5), carrying system (6), connecting cable (7) and AP adapter (8). The battery is carried on the carrying system as a backpack.
C: If a cordless product for STIHL AR L batteries (3) is to be supplied with energy:
Use the battery (5) alone. The battery is connected directly to the cordless product.
D: If the battery is to be recharged with a charger (4):
Use battery (5), connecting cable (7) and AP adapter (8). The AP adapter is inserted in the charger.

Connecting and Disconnecting Batter

Connecting battery to a STIHL cordless product with a socket

► Connect the battery as described in the instruction manual supplied with the cordless product.

Connecting battery to a STIHL cordless product with a battery

compartment for STIHL AP batteries

► Hold connecting cable plug (1) so that the arrow on its side lines up with the arrow point on the AP adapter’s socket (2).
► Insert the connecting cable plug (1) in the socket (2) on the AP adapter (3).
► Push AP adapter (3) into the battery compartment (4).

**Connecting battery to a STIHL cordless product for STIHL AR L

batteries**

► Connect the battery as described in the instruction manual supplied with the cordless product.

Disconnecting the battery

► Switch off the cordless product.
► If you are using a cordless product with a socket: Connect the battery as described in the instruction manual supplied with the cordless product.
► If you are using an AP adapter: Take the AP adapter out of the battery compartment.
► If you are using a cordless product for STIHL AR L batteries: Disconnect the battery as described in the instruction manual supplied with the cordless product.

After Finishing Work

After Finishing Work

► Switch off the cordless product.
► Disconnect the battery.
► If the battery, carrying system, connecting cable or AP adapter is dirty or wet: Clean the battery, carrying system, connecting cable or AP adapter and allow to dry.
► Clean the battery, carrying system, connecting cable and AP adapter.

Connecting and Charging USB Device

Connecting and Charging USB Device

► Pull out the dust cap (1).
► Insert the plug (2) in the USB port (3).
► Press the button (4).
USB device is being charged. If the USB device is not being charged, the charging current supplied by the battery is too low, 20.1. The USB device cannot be charged.

Transporting

Transporting the Battery

► Switch off the cordless product.
► Disconnect the battery.
► Make sure the battery is in a safe condition

► Carry the battery on your back or by the handle.
► If the battery is transported in a vehicle: Secure the battery so that it cannot move.
► If the battery has to be packed: Observe the following points when packing the battery:

• The packaging must be non-conductive.
• Make sure the battery cannot shift inside the packaging.

► Secure the packaging so that it cannot move.

The battery is subject to the requirements for the transport of dangerous goods. The battery is classified as UN 3480 (lithium-ion batteries) and has been tested in accordance with UN Manual of Tests and Criteria, Part III, sub- section 38.3.

For transport regulations see www.stihl.com/safety- datasheets

Storing

Storing the Battery

STIHL recommends that you store the battery with a charge between 30% and 45% (2 LEDs glow green).

► Observe the following points when storing the battery:

• Battery is out of the reach of children.
• Battery is clean and dry.
• Battery is in an enclosed space.
• Battery is stored separately from the product and charger.
• Battery is in non-conductive packaging.
• Battery is in a temperature range between -10°C and +50°C.

Storing the Carrying System, Connecting Cable and AP Adapter

► Observe the following points when storing the carrying system, connecting cable and AP adapter:
– The carrying system, connecting cable and AP adapter are out of the reach of children.
– The carrying system, connecting cable and AP adapter are clean and dry.
– The battery, carrying system and AP adapter are not hanging on the connecting cable.

Cleaning

Cleaning the Battery, Carrying System, Connecting Cable and AP Adapter

► Clean the battery, carrying system, connecting cable and AP adapter with a damp cloth.

Cleaning Contacts of the Connecting Cable

A video is available for this chapter

www.stihl.com/sxwjNw

► Pull connecting cable plug out of the socket or the AP adapter.

► If the contacts are discolored (arrow):. Use a fine sandpaper (grade P600) to remove the discoloration and clean the contacts until they are bright.

Maintenance and Repairs

Servicing and Repairing Battery, Carrying System, Connecting Cable and

AP Adapter

The battery, carrying system, connecting cable and AP adapter require no servicing and cannot be repaired by the user.

► If the battery, carrying system, connecting cable or AP adapter is defective or damaged: Do not use the battery, carrying system, connecting cable or AP adapter and contact a STIHL servicing dealer for assistance.

Troubleshooting

Troubleshooting Battery or Cordless Product

the battery fully as described in the instruction manual for the STIHL AL 300 and AL 500 chargers
1 LED glows red.| Battery too hot or too cold.| ► Disconnect the battery.
► Allow battery to cool down or warm up
3 LEDs flash red.| There is a malfunction in the battery| ► Disconnect battery and then reconnect it.
► Switch on the cordless product.► If 3 LEDs continue to flash red: Contact a STIHL servicing dealer for assistance.
3 LEDs glow red.| Cordless product too hot.| ► Disconnect the battery.

► Wait for cordless product to cool down.

4 LEDs flash red and short beeps sound in quick succession.| There is a malfunction in the battery.| ► Take the battery off your back.
► Disconnect battery and then reconnect it.► Switch on the cordless product.
► If 4 LEDs continue to flash red and short beeps sound in quick succession: Do not use or transport the battery, contact your STIHL servicing dealer.
| No electrical contact between cordless product and battery.| ► Disconnect battery and then reconnect it.
► If the cordless product still does not run when switched on or cuts out during operation: Clean contacts of the connecting cable.
| Cordless product or battery damp.| ► Allow cordless product / battery to dry.
Runtime of cordless product is too short.| | Battery not fully charged.| ► Recharge the battery fully as described in the instruction manual for the STIHL AL 300 and AL 500 chargers.
| | Normal battery life has been exceeded.| ► Replace the battery.
Battery cannot be found with STIHL App| | Bluetooth® radio interface on battery or mobile device is deactivated.| ► Activate Bluetooth® radio interface on battery or mobile device.
Charge process does not start when AP adapter is inserted in the charger| | Distance between battery and mobile device is too long.| ► Reduce distance, 20.1.
► If battery still cannot be found with STIHL App: Contact a STIHL servicing dealer for assistance.
1 LED glows red.| Battery too hot or too cold.| ► Leave AP adapter in the charger. Charge process starts automatically as soon as permissible temperature range is reached.

Product Support and Assistance on Use

Product support and assistance on use are available from STIHL servicing dealers.
For contacts and other information visithttps://support.stihl.com/ or https://www.stihl.com/.

Specifications

STIHL AR 2000 L, 3000 L

• Battery technology: Lithium-ion
• Voltage: 36 V
• Capacity in Ah: see rating label
• Energy content in Wh: see rating label
• Permissible temperature range for operation and storage: -10°C to +50°C
• Weight
• AR 2000 L: 7.4 kg
• AR 3000 L: 9.5 kg
• USB port: Plug type A
• BC1.2 (DCP)
• Output voltage: 5 V
• Maximum charging current:1.5 A
• Bluetooth® radio interface:
• Data link: Bluetooth® 4.2. Mobile device must be compatible with Bluetooth® Low Energy 4.0 and support Generic Access Profile (GAP).
• Frequency band: ISM band 2.4 GHz
• Maximum RF power transmitted: 1 mW
• Signal range: max. 10 meters. Signal strength is dependent on ambient conditions and the mobile device. Signal range can vary greatly depending on local conditions, including the receiver. Signal range can be much shorter in enclosed locations and through metallic barriers (e.g. walls, shelving, suitcases).
• Operating system requirements for mobile device: Android 4.4 (or higher) or iOS 9.3 (or higher)

REACH

REACH is an EC regulation and stands for the Registration, Evaluation, Authorisation and Restriction of Chemical substances. For information on compliance with the REACH regulation see www.stihl.com/reach.

Spare Parts and Accessories

Spare Parts and Accessories

These symbols identify original STIHL replacement parts and original STIHL accessories.

STIHL recommends the use of original STIHL replacement parts and accessories.

Original STIHL replacement parts and original STIHL accessories are available from STIHL servicing dealers.

Disposal

Disposing of Battery, Carrying System, Connecting Cable and AP Adapter

Information on disposal is available from STIHL servicing dealers.

► Dispose of the battery, carrying system, connecting cable, AP adapter and packaging in accordance with local regulations and environmental requirements.

EC Declaration of Conformity

STIHL AR 2000 L, 3000 L Battery

ANDREAS STIHL AG & Co. KG Badstrasse 115 D-71336 Waiblingen Germany

declare in exclusive responsibility that

• Category: Battery
• Make: STIHL
• Model: AR 2000 L, Serial identification: 4871
• Model: AR 3000 L, Serial identification: 4871

conforms to the relevant provisions of Directives 2014/53/EC and 2011/65/EU and has been developed and manufactured in compliance with the following standards in the versions valid on the date of production: EN 300 328 V2.1.1:2016, EN 62311:2008, EN 301 489-1 V2.1.1:2017, EN 301 489-17 V3.1.1:2017 and EN 62368-1:2014.

Technical documents are deposited at ANDREAS STIHL AG & Co. KG Produktzulassung (Product Licensing).
The year of manufacture, country of manufacture and serial number are applied to the battery.
Done at Waiblingen, 01.07.2019 ANDREAS STIHL AG & Co. KG

Thomas Elsner, Director Product Management and Services

www.stihl.com

References

• Hilfe und Beratung zu E-Commerce und STIHL Produkten  | STIHL Support
• Country Routing Page: Welcome to STIHL | STIHL
• Battery charging times
• Safety Data Sheets and Battery Documents of the STIHL products | STIHL | STIHL
• AR_AP_kontakt_anschlussleitung_reinigen.mp4 – Video
• Сертификаты соответствия | STIHL
• STIHL Connect
• AR_AP_kontakt_anschlussleitung_reinigen.mp4 – Video
• Hilfe und Beratung zu E-Commerce und STIHL Produkten  | STIHL Support
• Hilfe und Beratung zu E-Commerce und STIHL Produkten  | STIHL Support
• Country Routing Page: Welcome to STIHL | STIHL

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>