ZEEMR Z1 Mini Projection Screen Instructions

ZEEMR Z1 Mini Projection Screen

Safety Instructions

• Please read the Manual carefully prior to use and keep it properly for further reference;
• Do not block the Product’ air inlet/outlet during projection, to avoid damaging it due to high temperature;
• Avoid high-altitude falling or mounting of the Product to avoid damages; do not stare at the machine s lens to avoid eye injury;
• For any problem, do not dismantle the Product without permission; instead, contact the professional after-sales personnel for assistance.

Warning:
Do not dismantle, collide, or squeeze the Product, or put it on fire. For any major swelling, stop using it immediately. Keep the Product away from high temperatures.

With a focus on constant improvement, the Company devotes itself to improving product performance and offering products with high quality and competitive quality. All pictures and functions described in the Manual are subject to the real product and preset contents. The Company reserves the right to improve product functions and HMI described in the Manual without prior notice. The final product prevails.

Please keep your machine properly. The Company does not bear liabilities for the losses due to misoperation of software/hardware or maintenance, as well as the losses due to leakage of personal information to a third party. The Company does not bear liabilities for the accidental losses while using the Manual, nor undertake the claims of compensation proposed by the third party for using the Product. The Product’s function introduction has been reviewed and proofreads carefully by specialists. In case of any omission, your understanding and correction are highly appreciated.

For more information about product introduction and value-added service, please feel free to visit our official Website: www.GLOBAL.ZEEMR.COM.

List of Components

Note:
Some components may vary along with the configuration of the model and system!

Product Introduction

Remote control description

Basic Parameters

Indicator Status

Power on/off

Power on

• Method 1: Press the power button above the Product for 1-3s to power on.
• Method 2: Make sure the remote controller has enough power supply, keep it facing the Product and press the power button to power on the Product.

Power off

• Method 1: Press the power button above the Product for 1-3s to power off the Product
• Method 2: Make sure the remote controller has enough power supply, keep it facing the Product, and press the power button to power off the Product.

Troubleshooting

Projection Size and Distance

Definition Adjustment
Operate the zoom thumbwheel/rod to adjust the definition. (Note: The recommended projection distance is 1.5m – 3m).

Function Setting

Projection
Select “Project”, click [OK] to enter the projection details page , ensure that the projector network and the mobile phone/computer/ other devices are in the same network, then select the corresponding “ios/Android projection mode, and then operate according to the prompt 4.

Multimedia video
Select “Video”, click [OK] to enter the media details on page 1, select the target video 2, and then click [OK] to enter the video player.

Multimedia music
Select “Music”, click [OK] to enter the media details select the target music 2, and then click [OK] to enter the music player.

Bluetooth music
Select “Bluetooth music” 1, click [OK], the screen automatically turns off, and a pairing voice appears. The music is transferred to and played on the projector after the Blue- tooth pairing of the mobile phone and projector.

Signal source
Connect the projector with other devices through HDMI cables, and then select “Signal source” 1 on the projector, click [OK], the system detects the signal, and the images of the computer/other devices will be utomatically transferred to the projector.

Settings
Click “Set card” 1 or press the “Set” of [Remote control to pop out the settings interface and then it can set the network, Bluetooth, projection physical settings, signal source, sound, system update, system information, etc., of the projector.

Settings Network
Select 1 to set the projector network, including “Wireless network and Ethernet”. In the case of “Wireless network”, click “OK” after the projector finds the network target 2 , input the WiFi password, and click “Y s” to automatically pair the network. In the case of “Ethernet”, directly insert the int rent cable with the normal signal into the [Int rent interface] of the projector.

Settings Bluetooth
Select 1 to set the projector Bluetooth, then the projector will automatically scan the “Bluetooth target” 2 in the available range, and then select target pairing.

Settings projection settings
Select  1 to set the projection parameters of the projector including the projection method, image zooming, and aspect ratio. The automation function including the following is available:

1. Autofocus: press “Autofocus” on the projector or remote control to make the projector automatically focus clearly;
2. Automatic trapezoidal correction: the screen will be automatically corrected when it is side projected;
3. Four-corner correction: manually adjust the “Coordinates” of the four corners of the screen to manually correct the screen.
4. Automatic curtain alignment: the screen will be automatically aligned with the canvas when the projector screen completely covers the curtain;

Settings signal source
Select 1 to switch the signal source or sound control mode of the projector.

Settings sound setting
Select 1 to set the sound output device of the projector and turn on or off the “Key sound”.

Settings system setting
Select 1 to update the system and look up the software and hardware information of the projector.

Description of Hazardous Substances

The sheet was prepared as per SJ/T11364

• O: The content of this hazardous substance in this part is conforming to the limit of GB/T26572.
• X: The content of certain homogeneous materials in this part exceeds the limit of GB/T26572.

FCC STATEMENT

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with the FCC Radiation exposure limit set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Manufacturer:
Jiangsu Golden Vision Legend Technology Co., LTD.

Add.:
Room 105-7, Building 17, Phase 1, HR Service Industry Park, Nanjing Jiangbei New District, No. 1, Qiliqiaobei Road, Jiangbei New District, Nanjing.

Official Website:
www.GLOBAL.ZEEMR.COM.

Tel: +0086 400-100-7658
E-mail: GLOBAL@ZEEMR.COM.

MADE IN CHINA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>