UTHFY JTF-03C Tower Fan with Remote Control
- June 15, 2024
- Uthfy
Table of Contents
UTHFY JTF-03C Tower Fan with Remote Control
PLEASE READ AND SAVE THESE INSTRUCTIONS This fan is for residential use only. It is not intended to be used in commercial or industrial settings Thank you for using this product, with proper care, this product will provide years of service. Carefully follow the instructions to ensure that this product functions safely and properly for years to come.
PLEASE SAVE THESE INSTRUCTIONS
SAFETY INFORMATION
READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS BEFORE USING THIS FAN.
WARNING!
When using electrical appliances, basic safety precautions should always be followed, including the following:
WARNING
- To reduce the risk of fire or electrical shock, do not use this product with any solid-state speed control device. To reduce the risk of fire or electric shock and injury to anyone, do not use in a window.
- This product employs overload protection (blown fuse) which could indicate an overload situation. If the fuse blows, unplug the product from the outlet . Replace the fuse as per the user servicing instructions (follow marking for proper fuse rating) and check the product. If the replaced fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
- USE this fan only as described in this manual. Other uses are not recommended as it may cause fire or electric shock.
- To protect against electrical shock, do not place a fan in the window plug or cord in water. or spray with liquids.
- Unplug the fan from the outlet when not in use, when moving fan from one location to another and before cleaning.
- Do not operate the fan in the presence of explosive and/or flammable fumes.
- Avoid contact with moving fan parts.
- To disconnect, grip the plug and pull it from the wall outlet. Never yank the cord. Always use on a dry surface.
- Do not operate any fan with a damaged cord or plug. discard the fan or return to an authorized service facility for examination and/or repair.
- Arrange cord away from the traffic area and where it will not be tripped over.
- The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Close supervision is necessary when any appliance is used by or near children. Children should not play with the appliance.
- If the power cord is damaged, it is strongly recommended to request a specialist to handle.
- Do not leave the fan running unattended.
SAVE THESE INSTRUCTIONS
USER SERVICING INSTRUCTIONS
Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
- Open fuse which is covered by sliding access cover on top of attachment plug toward blades.
- Remove the fuse carefully by gently pulling out the ends of the fuse from the receptacle. Replace fuse only with 5 amp, 125 volt fuse.
- Install replacement fuse by first placing the end of the fuse receptacle which is opposite of the blades of the plug, then carefully push in the other end. Only push against the metal end of the fuse, not the glass centre portion.
- Close the fuse cover by sliding the cover back into the plug until it is completely closed and latches.
To prevent risk of fire, do not replace attachment plug. Contains a safety
device (fuse)that should not be removed. Discard product if the attachment
plug is damaged.
IN THE BOX
- FAN
- BASE
- SCREWS (3 pieces)
- INSTRUCTION MANUAL
- Remote control
PREPARATION
Before beginning installation of the product, make sure all parts are present. compare parts with the package content list and hardware contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
ASSEMBLY INSTRUCTION
-
Assemble left and right bases.
Note: Let the power cord through the hole of the base when assembling. -
Drive 3 screws in the accessories bag into the hole on the base and fix the base on the main body.
-
Put the product on a stable, smooth ground before using it.
OPERATION INSTRUCTIONS
Intended Use
This product is intended for indoor residential and office use only, not for industrial or other commercial applications, Use with electrical wiring that is in good working order and that meets applicable codes and regulations. If you have any questions about whether your wiring is adequate, consult a qualified electrician.
Operation:
Buttons
- On/off button: press the on/off button to switch the fan on or off.
- Speed button: press the button to change the speed between low-> medium-> high. The default speed is low speed.
- Mode button: press the button to change fan mode between normal mode – natural mode-> sleep mode Sleep mode: lowers speed every 30 minutes and then stays at the lowest speed.
- Natural mode: the speed changes randomly
- Swing button: press the button to activate or deactivate swinging/oscillation. The fan moves slowly from left to right and back again. Oscillation works in all fan modes.
- timer button: Press this key to set the timer, step 0.5 hours, max 7.5 hours.
Battery
Before first use: Pull the protective film to remove it. The remote control is now ready for use. To replace the battery: open the battery compartment on the back of the remote control and replace the used battery with a new one. Battery type:CR2025
MAINTENANCE
- Be sure to unplug the power cord from the outlet before cleaning.
- Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Do not submerge the unit in water to clean it. Thoroughly remove soap with clean water
- Be sure not to get water or other liquid inside the fan motor.
- Dry all parts completely before reassembling and reconnecting to a power source.
STORAGE
Store the fan in a cool, dry location when not in use. To prevent dust and
dirt build-up, use the original packaging to repack the unit.