DOMUS STRAP-FL Pendant Light Instructions
- June 12, 2024
- DOMUS
Table of Contents
DOMUS STRAP-FL Pendant Light
Product Information
The STRAP-FL Pendant Light is a high-quality lighting fixture manufactured by Domus Lighting. It is available in two variants – Blk and Wht, with item numbers 22718 and 22719 respectively. This pendant light is designed to be installed by a professional electrician and requires a maximum power of 60W with a voltage of 240V. It requires one E27 Globe, which is not included in the product. It is important to note that failure to follow the usage instructions may void the warranty of the product. The lamp should not be touched when in use, and should be kept away from hot steam and corrosive gas.
Product Usage Instructions
- Ensure that the power supply is switched off before fitting the product.
- Have a professional electrician install the STRAP-FL Pendant Light.
- Make sure that the E27 Globe is compatible with the pendant light before installation.
- Once installed, turn on the power supply and test the light to ensure it is working properly.
- Do not touch the lamp when in use and keep it away from hot steam and corrosive gas.
STRAP-FL
-
Variants
-
Item No.
-
Blk
-
Wht
| 22718 | 22719 | STRAP- FL |
|---|
Thank you for purchasing your new STRAP Pendant Light, Please take the time to read and understand the instruction sheet below. Failure to do so may void warranty.
Specifications
Voltage:| 240V| Power:| 60W Max| Requires:|
1xE27 Globe (Not Included)
---|---|---|---|---|---
Note:
- The lamp must be installed by professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
CONTACT
- 29-31 Richland
- St. Kingsgrove. Sydney NSW 2208 Australia
- Phone: 02 9554 9600
- Fax: 02 9554 9433
- enquiries@domuslighting.com.au.
- www.domuslighting.com.au.