CRYSTORAMA 6625-VG-CL-MWP Othello Five Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 6625-VG-CL-MWP Othello Five Light Chandelier
Product Information
- Model Number: 6625-VG-CL-MWP
- Product Name: Assembly Instruction for Lighting Fixture
- Usage: Indoor
- Bulb Requirement: 5 Candelabra Base Bulbs (40Watts Recommended, 60 Watts Max)
- Product Rating: Damp Rated
Part Numbers
- A. (3)-Wire Connector
- B. (1)-Mounting Plate
- C. (1)-Ground Screw
- D. (1)-Nipple
- E. (2)-Outlet Box Screws
- F. (1)-Canopy (W5.1 xH1)XEH6623VGCAN5IN
- G. (1)-Collar Loop
- H. (1)-Collar Ring
- I. (1)-Chain;72,4mm XEH6623VGCHA4MM
- J. (1)-Top Assembly
- K. (1)-Fabric Shade (W24xH8.5)XEH6625SHA24IN
- L. (5)-Bobeche (D3.9x Hole:1) XEH6623BOB4IN
- M. (5)-Metal Sleeve (H4) XEH6625VGMCDL4IN
- N. (5)-Plastic Sleeve (H4 ) XEH6625PCDL4IN
- O. (1)-Frame
Usage Instructions
- Turn off the power supply before you start with the installation.
- Install all electrical components through a licensed electrician as per the National Electric Code and the appropriate local electrical codes.
- Use LED bulbs for extended usage. For this lighting fixture, you will need 5 Candelabra Base Bulbs with recommended wattage of 40 watts and maximum wattage of 60 watts.
- Place the shade over the frame and then place the top assembly over the shade. Ensure that the slot in the top assembly is aligned with the shade spoken. Secure the shade with the loop.
- Safely attach the fixture to the outlet box, install bobeches, and bulbs, and proceed to connect the power.
- When you begin to dress the fixture, start with the packet labeled (A).
- Apply crystal sets in alphabetical order as follows:
- A. (14mm+50mm)x15sets
- B. (14mmx3pcs+50mm)x5sets
- C. (Square+14mm+63mm)x5sets
- D. (14mm+Square+14mm+63mm)x5sets
- E. (14mmx9pcs)x10sets
- F. (14mmx15pcs+50mm Ball)x1set
- Place the fabric shade and top assembly on top of the frame, then secure it by tightening the loop on the top assembly.
DIMENSION
WARNING All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. You will need 5-Candelabra Base Bulb 40Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is damp rated
How to Install
- Place the shade over the frame then place the topassembly over the shade Make sure the slot in the top assembly is aligned with the shade spoke. Secure the shade with the loop.
- After safely attaching the fixture into the outlet box, install bobeches bulbs and proceed to connecting the power
- When you begin to dress the fixture, start with packet labeled (A)
- IMPORTANT: Apply crystal sets in alphabetical order
Crystal Sets
- A. (14mm+50mm)x15sets
- B. (14mm×3pcs+50mm)×5sets
- C. (Square+14mm+63mm)×5sets
- D. (14mm+Square+14mm+63mm)×5sets
- E. (14mmx9pcs)×10sets
- F. (14mmx15pcs+50mm Ball)x1set
WARNING: This product can expose you to lead which is known to the State of California to cause cancer and or birth defects or reproductive harm For more information go to www.P65W.arnings.ca.gov.
Part Numbers
- A. (3)- Wire Connector
- B. (1)- Mounting Plate
- C. (1)- Ground Screw
- D. (1)- Nipple
- E. (2)- Outlet Box Screws
- F. (1)- Canopy (W5.1″ XH1″ )XEH6623VGCAN5IN
- G. (1)- Collar Loop
- H. (1)- Collar Ring
- l. (1)- Chain;72″,4mm XEH6623VGCHA4MM
- J. (1)- Top Assembly
- K. (1)- Fabric Shade (W24″xH8.5″) XEH6625SHA24IN
- L. (5)- Bobeche (D3.9″ x Hole: 1″‘) XEH6623BOB4IN
- M. (5)- Metal Sleeve (H4″) XEH6625VGMCDL4IN
- N. (5)- Plastic Sleeve (H4″) XEH6625PCDL4IN
- O. (1)- Frame
PIace the (K) Fabric shade and (J) TOP assembly on top of (O) Frame then secure by tightening the loop on the (J) TOP Assembly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>