habitat 1970421 Confetti Glass Table Lamp Instruction Manual
- June 12, 2024
- habitat
Table of Contents
CONFETTI GLASS TABLE LAMP
1970421
Assembly and User Instructions
Please keep for future reference
Important –Please read these instructions fully before using
If you need help please call our Customer Services on 0345 6400800
Produced for Argos, UK – 489-499 Avebury Boulevard, Central Milton Keynes, MK9
2NW / Ireland – Unit 7, Ashburn Retail Park, Ballybane Road, Ashburn , County
Math
Parts and Components Listing
A. Pre-wired fitting x 1
Safety Information
IMPORTANT – Please read these instructions fully before installation and
keep for future reference
For your safety, this product must be installed in accordance with local
building regulations. If in any doubt, or where required by law, consult a
competent person who is registered with an electrical self-certification
scheme. Further information is available
online or from your local authority.
IMPORTANT -This product has been designed for non-professional, domestic
use only.
IMPORTANT – Carefully unpack and examine the product for any damage. If
you think there is a defect, do not use the product and contact our customer
services on 0345 6400800.
IMPORTANT – Dispose of all packaging correctly and responsibly and in
accordance with all local laws and regulations. Never leave packaging
components within reach of children as they can be a source of danger.
IMPORTANT – Before inserting or replacing bulb(s) ensure the power is
switched off and the bulb(s) have cooled down.
WARNING – Do not modify or alter any product before or after
installation. This may render the product un-safe.
WARNING – This is a Class 2 product and does not require an earth
connection.
WARNING – Accessible parts become hot during use, young children must be
kept away.
WARNING – If replacing the fuse in the plug do not exceed the maximum
rated amps as specified on the plug.
WARNING – This product is not intended for use by persons (including
children) with reduced physical, sensory and mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the product by persons responsible for their
safety.
WARNING – Children should be supervised to ensure that they do not play
with the product.
WARNING – Do not place this fitting in a damp atmosphere.
WARNING – The luminaire should be positioned so that prolonged staring
into the luminaire at distance closer than 0.2m is not expected.
CAUTION – Ensure the power is switched off before cleaning or carrying
out any maintenance.
Maintenance
Maintenance
CAUTION! Always disconnect power supply when servicing or cleaning.
Cleaning
- Use a clean dry soft or slightly damp cloth.
- Do not use abrasive cloths or polishes as this may cause damage to the product.
Changing the bulbs
IMPORTANT! Ensure that the bulb has cooled down before replacing.
– Ensure that the power supply has been disconnected.
IMPORTANT!
If the external flexible cable or cord if this luminaire is damaged it shall
be exclusively replaced by the manufacturer or his service agent or similar
qualified person.
Installation
Installation
IMPORTANT ! – Electrical connections must be carried out by a suitably
qualified person and in accordance with all relevant local building and
installation regulations. If in doubt consult a qualified electrician.
Installation
- Screw the bulb (not supplied) into the lamp holder, ensuring you do not exceed maximum recommended wattage.
- Remove the plastic plug cover and plug in to a normal household socket.
- Using the in-line switch, turn on and test.
Replacement Lamp
We recommend LED lamps only (Ensure same lamp brand and specification for each
lamp holder)
Maximum wattage – See lamp holder Light bulb shape
- See lamp holder
Customer Helpline 0345 6400800
APPROVED
14/10/2022
ISSUE 1