V I V O DESK-M55TB Crank 55X24 Inch Height Adjustable Desk Instruction Manual

V I V O DESK-M55TB Crank 55X24 Inch Height Adjustable Desk

Product Information

The Crank 55 x 24 Height Adjustable Desk (SKU: DESK-M55TB) is a desk that can be adjusted to different heights. It has a weight capacity of 88lbs (40kg), comes with a product warranty, and can be returned within 30 days. The package includes lifting columns, a desktop, a sync rod, a crank, upper and lower crossbars, screws, pads, washers, and an Allen wrench.

Product Usage Instructions

1. Before assembling, check that all parts are included and not damaged. Contact customer support if any parts are missing or defective.
2. Use the Phillips screwdriver, drill, and level as needed.
3. Start with step 1: Install Sync Rod. Stand up Lifting Columns (A) and insert Sync Rod (B) into the socket on each column. Use Crank (F) to align columns if needed.
4. Proceed to step 2: Assemble Upper Crossbar. Assemble Upper Crossbar (C) to the top of the columns using the M5x60mm Screws (S-C) and Lower Crossbar (D) to the back using M6x12mm Screws (S-A). Tighten all screws using Allen Wrench (T-A).
5. Refer to the assembly video or product link for further assistance.
6. Use the desk according to the instructions in the manual. Do not exceed weight capacity or use the desk for any purpose not specified in the manual. Failure to follow instructions may result in damage or injury.
7. If any parts are received damaged/defective or you are missing a part, contact customer support within 30 days of product delivery for a replacement at no cost.
8. If the product doesn’t work out, contact customer support within 30 days for a hassle-free return. Note that return shipping charges for items ordered in error or no longer needed will be at the buyer’s expense.

ASSEMBLY VIDEO AVAILABLE:
Follow along step-by-step with our video walk through by scanning the QR code with your mobile device or by following the product link: vivo- us.com/products/desk-m55tb

PRE-ASSEMBLY

BEFORE YOU BEGIN
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ELECTRICAL WARNING :
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED

WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury

Product Warranty

For the most up to date details on your product’s warranty, please visit the product’s listing on our website or reach out to customer support. vivo- us.com/products/desk-m55tb

Returns | Product Didn’t Work Out?
We offer a hassle-free 30 day return on all products. Contact customer support at 309-278-5303 or help@vivo- us.com. Please note: For items ordered in error or no longer needed, the return shipping charges will be at the buyer’s expense

TOOLS NEEDED:

PACKAGE CONTENTS

Please consult the parts list below and ensure you have everything you need to assemble your product. If parts are missing or damaged, please contact us.

NOTE : SOME HARDWARE INCLUDED MAY NOT BE USED

WARNING
PINCH POINT DO NOT place hands on or near support bars. Moving parts can crush and cut. Pinch points are created during lifting and lowering the worksurface. Failure to follow these instructions may result in serious personal injury.

ASSEMBLY STEPS

1. STEP 1: Install Sync Rod Stand up Lifting Columns (A) and insert Sync Rod (B) into the socket on each column. Use Crank (F) to align columns if needed.
2. STEP 2 : Assemble Upper Crossbar Assemble Upper Crossbar (C) to the top of the columns using the M5x60mm Screws (S-C) and Lower Crossbar (D) to the back using M6x12mm Screws (S-A). Tighten all screws using Allen Wrench (T-A).
3. STEP 3: Place Pads Remove adhesive backing from Pads (S-D) and place them on top of the assembled frame.
4. STEP 4 : Mount the Desktop Place Desktop (E) on top of the frame. Secure using the M6x35mm Screws (S-B) with M6 Washers (S-E), and tighten with a Phillips screwdriver.
5. STEP 5 : Leveling the Frame Insert Crank (F) into the hex socket of the lifting column
6. Figure 1 : Turn the crank to raise or lower the desk.
7. Figure 2 : Store the crank in the rear of the desk support bracket on the column as shown.
8. Figure 3 : Turn the foot pads to adjust the desk level.
9. Figure 4 : Use a bubble level to ensure the desk is sitting perfectly level.

CAUTION!

1. Do not exceed desk weight limit.
2. Keep area of vertical motion free of obstacles
3. Keep weight on desk balanced for correct operation and longer life of components
4. Leave enough slack in cables to allow for full range of vertical motion

Failure to follow these instructions may result in property damage and/or personal injury.

CHECK OUT OTHER GREAT PRODUCTS FROM EXPLORE MORE AT VIVO-US.COM We offer a wide array of home & office products to fit your needs. From height adjustable desks to monitor mounts to keyboard trays and more!

SPEAKER MOUNTS & STANDS
Whether you’re mounting a soundbar or surround sound system, we’ve got a mounting solution to fit your needs

CABLE MANAGEMENT
From single monitor mounts to hex mount, gromment or clamp-ons, we’ve got a mounting solution for your setup

MONITOR MOUNTS
From single monitor mounts to hex mount, gromment or clamp-ons, we’ve got a mounting solution for your setup.

QR CODE

WHO WE ARE
VIVO is more than a brand of ergonomic office furniture. We are a team of creative and innovative indivuduals working together to offer high quality, affordable ergonomic solutions. We think and work outside of the box to serve you, our customer, to the best of our abilitiy.

Need Assistance? We Would Love to Help! Personable Customer Support | Mon-Fri 7am-7pm We offer immediate assistance with rapid response times from customer service agents and product techncians to help you every step of the way!

• Call Us: 309-278-5303
  Average Resolution Time: 5m 4s

• Chat Us: www.vivo-us.com
  Average Resolution Time: < 15m

• Email Us: help@vivo-us.com
  Average Resolution Time: 1HR 8M

LOVE YOUR NEW VIVO SETUP?

Ready to share that new amazing setup? Want to brag about that amazing new ergonomic solution? Tag us in your photo FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
• 55" x 24" Crank Height Adjustable Desk – VIVO - desk solutions, screen mounting, and more
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>