SCOSCHE 142MPWDEX2 Pro2 Extendo Magnetic Telescoping Phone Mount Instruction Manual
- June 12, 2024
- Scosche
Table of Contents
SCOSCHE 142MPWDEX2 Pro2 Extendo Magnetic Telescoping Phone Mount
INCLUDED ELEMENTS
-
A. MagicMount™ Pro2 Mount Head
-
B. Telescoping Window/ Dash Mount
-
C. StickGrip1 Mounting Base
-
D. MagicPlate™
-
E. Protective Film
-
F. Cable Routing Clip*
For your phone’s charge cable (cable not included) -
G. Cleaning Wipe
DEVICE SETUP
- SECTION A -iPhonet 12 or Later (with optional MagSafe™ Case)
- SECTION B -Wireless Charging Smartphones (with Case) iPhone ® 11 / Pixel 4 & Newer (Case Required) Wireless Charging Smartphones (without Case)
- SECTION C -Mount Head Assembly & Adjustment
- SECTION D -Telescoping Arm Adjustment
- SECTION E -Window/Dash Mount
SECTION A
iPhone 12 or Later (with optional MagSafe Case) If using a case, it must be a MagSafe case (not included) for MagicMount Pro2 to function properly.
Note : MagicPlate not required.
iPhone 12 or Later (without Case)
Note : MagicPlate not required
SECTION B
Wireless Charging Smartphones (with Case) iPhone 11 / Pixel 4 and Newer (Case required*) Manufacturing materials do not allow adhesives to bond directly to the device.
Wireless Charging Smartphones (without Case)**
It is recommended to use the Protective Film. If the MagicPlate needs to be
removed, the film simplifies the process. To remove the MagicPlate use a
credit card and slide in between the film and MagicPlate. Do NOT use anything
sharp/hard as this can damage the device.
SECTION C
Mount Head Assembly Mount Head Adjustment Loosen ball Joint collar to adjust angle or rotate mount 360°
SECTION D
Telescoping Arm Adjustment
Loosen front knob to extend telescoping arm. Loosen rear knob to adjust angle
of arm
SECTION E
Window Mount
- Clean the window suriace.
- With the lever in the UP pos1t1on, place the mount on window and press lever down to lock in place.
StickGrip Dash Mount
- Select a flat suriace and clean using supplied wipe*.
- Remove protective film from the StickGrip mounting base**. Place mounting base on suriace and press firmly.
- With the lever in the UP position, place the mount on the mounting base, and press lever down to lock 1n place.
- Supplied cleaning wipe may cause discoloration of certain plastics, vinyls and painted surfaces. It is recommended to test in an inconspicuous area first.
- Note StickGrip may leave residue or discoloration on some surfaces. It may also leave a ring of residue when mounted to the dash.
- To renew and reuse St1ckGrip mounting base, rinse under warm water and allow to air dry
MagicMount Pro2
Scosc’1e Industries 1550 Pacific Avenue Oxnard, Californ a 93033
Phone : 800 363-4490 x1 / 805 486-4450 x1 www.scosche.com ©2022 Scosche lnaustres
Sosche, Mag1cMount, MagicPlate, StiCkGrip are all trademarks of Scosche listens. Other marks or brands are The property of their respective ow11ers Devices dnd or appearance 1ray vary Designed in Oxnard, California SI MP2WDEX2 4/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>