HUDORA 72175-00 Rubber Board Swing Instruction Manual

: June 12, 2024
: hudora

Table of Contents

HUDORA 72175-00 Rubber Board Swing
Product Information
Product Usage Instructions
CONGRATULATIONS ON
TECHNICAL SPECIFICATIONS
SAFETY INSTRUCTIONS
INSTRUCTIONS ON ASSEMBLY
HANGING DEVICE AND ADJUSTMENT
MAINTENANCE AND STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA 72175-00 Rubber Board Swing

Product Information

Product Name: Rubber Board Swing
Item Number: 72175/00
Dimension: 45 x 17.5 cm
Purpose: Device powered by muscle power, for swinging in a sitting position.
Minimum User Age: 36 months
Maximum Height for Suspension: 250 cm
Minimum Height for Suspension: 160 cm
Max. Body Weight: 100 kg

Product Usage Instructions

Open the package and check if all the parts are included.
Choose a suitable location to install the swing, keeping in mind the maximum and minimum height for suspension.
Attach the metal brackets for the swing seat to a sturdy support structure using appropriate screws, nuts, and bolts. Ensure that the brackets are securely fixed in place.
Ensure that the swing is stable and secure before use.
Ensure that the child is always supervised while using the swing.

If you face any issues during assembly or require further information about the product, visit http://www.hudora.de/.

CONGRATULATIONS ON

PURCHASING THIS PRODUCT! Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Rubber board swing
Item number: 72175/00
Max. Height for Suspension: 250 cm
Min. Height for Suspension: 160 cm
Max. Body Weight: 100 kg
Dimension : 45 x 17,5 cm
Purpose: Device powered by muscle power, for swinging in a sitting position.
Minimum user age: 36 months

If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.
CONTENTS

1 x Swing seat
2 x Swing ropes
2 x Metal brackets for swing seat
1 x These instructions Other parts which may be included with the delivery in some circumstances are not required.

SAFETY INSTRUCTIONS

WARNING! Maximum load cannot exceed 100kg.
WARNING! Minimum user age: 36 months.
WARNING! Only for domestic use. Only suitable in the outdoors area.
WARNING! To be used under the direct supervision of an adult.
WARNING! Not suitable for children under 36 months. Risk of falling.
WARNING! Not suitable for children under 36 months. Long cord. Strangulation hazard. Small parts. Choking hazard.
The owners of the swing as well as the competent supervisory personnel are responsible for ensuring that all users follow the instructions in the operation manual.
Do not make any technical modifications.
Changes to the original product must only be carried out according to manufacturer specifications.
No one is permitted to gain access to the swing area during use.
Never stand or kneel on the swing.
Always hold yourself firmly with both hands.
No objects of any kind must be in the vicinity of the swing zone (trees, walls, fences, clotheslines).
Make sure that you have a safety clearance of at least 2 m (front and back) beyond the maximum reach of the swing and make sure the ground is level and shock absorbing (e.g. grass) without any sharp edges or pointed objects, obstacles, inclines, levels, steps or hard surfaces (e.g. concrete) etc.
Clearance to stationary components on the side, such as the swing scaffolding, must be at least 40 cm.
Maximum raised height must not exceed 250 cm as measured from the ground.
Swinging components, such as a neighboring swing, must be placed at a distance of at least 60 cm.
In idle mode, the swing must be at least 40 cm and maximally 60 cm from the ground.
You should never install a swing in such a way that the user could be blinded by sun rays.
Suspension connectors shall be of a design that will prevent unintentional disconnection.
The self-locking effect of the self-locking nuts or else lacquer can subside after repeated loosening and tightening of the connection elements.
When permanently irradiated with UV light, the material ages significantly faster. To avoid premature aging and thereby extend the service life, you should always store the product in a dry and dark place when not in use. Do not permanently expose the product to wind, moisture, extreme temperatures or sunlight.

INSTRUCTIONS ON ASSEMBLY

Prior to installation, carefully select and check the location where you will install the swing. Please make sure that the swing carrier is adequately stable. Please also take into account that swinging produces centrifugal forces that can put a lot of strain on the swing carrier. Please consult an expert (statics expert, architect, carpenter) and ask how much load your swing carrier can tolerate. Mount the metal brackets on both sides of the rubberized swing board from above as shown in Fig. 1. Make sure the screws are tight. It should only be possible to move the brackets slightly.

HANGING DEVICE AND ADJUSTMENT

The hanging points must be at least as far apart as the swing seat + 100 mm. The swing is packaged with two ropes and adjustment eyelets so that the height of the swing can be variably aligned with any suitable hanging device (Fig. 2). Before hanging up the swing, insert the end of the rope through the bracket using the eyelet (rear hook) (B) of one of the ropes. (Fig. 3) Then lay the rope double for about half its length (approx. 20 cm) and guide the resulting loop from behind through the open adjustment eyelet (B). (Fig. 4) Close the adjustment loop through the loop so that the rope cannot be pulled out (Fig. 5). HUDORA-72175-00-Rubber-Board-Swing-
FIG-3 Repeat this process with the second rope and eyelet of the swing. The hanging swing can now be individually adjusted. No one should sit on the swing while making the adjustments. When extending or reducing the length of the swing ropes please make sure that the ropes remain equally long at all times. If the lengths of the ropes differ, this will lead to circular pendulum movements of the swing. Make sure that swing is set up in such a way that the person using the swing cannot reach the ground with the tips of his or her toes. If in doubt, perform a few gentle test swings.

MAINTENANCE AND STORAGE

Use only a dry or damp cloth to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use the original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used anymore. If in any doubt, please contact our service team (http://www. hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone. Check the product for damage or traces of wear and tear before and after each use. You should also replace all the plastic parts after a maximum of 5 years to prevent a possible failure of these parts
Check the product for damage or traces of wear and tear before and after each use.

We also recommend before each use:

to check for the firm sitting of nuts and bolts, tighten if necessary
to lubricate moving parts in order to minimize wear
to check all covers of screws and sharp edges and replace if necessary
to replace defective parts according to the manufacturer‘s instructions
to check swing seats, chains, ropes, and other means of attachments for evidence of deterioration

DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collection point in your area. Local waste management companies will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise, however, we put just as much effort into rectifying them. Therefore, you can find numerous information on the product, replacement parts, solutions to problems, and lost assembly manuals at http://www.hudora.de/.