CRYSTORAMA JAY-A5006-BS Jayna Eight Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA JAY-A5006-BS Jayna Eight Light Chandelier
Product Information
The product model number is JAY-A5006-BS by Crystorama.com. The product is a fixture with a damp rating, which means it can be used in areas with high humidity levels without any issues. The fixture requires 8 Candelabra Base Bulbs, with a recommended wattage of 40W and a maximum wattage of 60W. It is suggested to use LED bulbs for extended use. The product comes with various parts, including mounting hardware, canopy, collar ring, collar loop, quick links, hanging chain, fixture loop, swivel, center stem, and candle sleeves. The wood ball A is also included in the package.
Product Usage Instructions
- Place the candle sleeve onto the socket.
- Insert the recommended bulb (not included) into the socket. Ensure that the wattage of the bulb does not exceed the maximum recommended wattage of 60W.
- Hang the wood ball A onto the bottom of the fixture using the set of hangings provided (20mm+80mm A).
- Use the mounting hardware and follow the instructions to install the fixture onto the ceiling.
- Use the hanging chain (72,4mm) to adjust the height of the fixture as desired.
Note: It is recommended to use LED bulbs for extended use of the fixture. Also, ensure that the fixture is installed in a damp-rated area only.
DIMENSION
WARNING:
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. You will need 8 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE
HOW TO INSTALL
- Place the candle sleeve onto the socket, and insert recommended bulb (not included).
- Hang the wood ball “A” onto the bottom of the fixture.
Hangings . 1 Set. 20mm+80mm
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
PART NUMBER
- A. (1) – Mounting Hardware
- B. (1) – Canopy(W5.1″,H1″) #XRE5006BSCAN5.1IN
- C. (1) – Collar Ring
- D. (1) – Collar Loop
- E. (2) – Quick Link
- F. (1) – Hanging Chain(72″,4mm) #XRE5004BSCHA4MM
- G. (1) – Fixture Loop
- H. (1) – Swivel
- I. (1) – Center Stem(10.8″,9.5mm) #XRE5006BSSTEM10.8IN
- J. (4) – Candle Sleeve(W0.87″,H3.1″) #XRE5006BSCDL3.1IN