HUDORA 76909 Soccer Goal Instruction Manual
- June 12, 2024
- hudora
Table of Contents
HUDORA 76909 Soccer Goal
PARTS LIST
1| 
| 1 x
---|---|---
2| 
| 1 x
3| | 1 x
4| | 2 x
5| | 2 x
6| | 1 x
7| | 1 x
8| | 2 x
9| | 2 x
10| | 1 x
11| | 1 x
12| | 2 x
13| | 1 x
14| 
| 1 x
15| | 4 x
16| 
| 2 x
17| | 32 x
18| | 34 x
19| | 34 x
20| | 7 x
21| | 1 x
ASSEMBLY
INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private / domestic use only. This product is not designed for commercial / industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item: Stadion soccer goal
Item number: 76909
Dimensions when assembled: 300 x 160 x 90 cm
Purpose: Soccer goal for versatile shooting and goalkeeper training.
If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de.
CONTENTS
1 x Soccer goal (cf. part list on pages 2 – 3) | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not required for the installation and use of the product.
SAFETY INSTRUCTIONS
- WARNING! Not suitable for children under 36 months. Long cord. Strangulation hazard.
- WARNING! Do not climb on the goal frame or net or hang from the goal posts. There is a serious risk of injury!
- Prior to use, check all parts of the goal for damages and correct assembly. In this regard, it is important to check the connecting elements and screw connection for stability and fit. Any sharp edges that might have formed must immediately be removed!
- Children should only use the product when they are under adult supervision.
- No liability is assumed for damages resulting from incorrect application of the instruction manual.
INSTRUCTIONS ON ASSEMBLY
-
Assembling the goal frame
Assemble the goal frame as shown in the illustrations (1-4). After assembly, check that all plug-in and screw connections are securely connected. -
Assembling the goal net
After the goal frame has been completely assembled, the net can be attached as shown in fig. 5 and 6. To do this, pull the net over the goal frame from behind. The HUDORA logo must be positioned in the middle of the crossbar. Now open the hook-and-loop fasteners of the sleeve and wrap it around the goal frame. You can then close the hook-and-loop fasteners on the back of the sleeve. To accurately attach the goal net to the frame, we recommend that you only close small areas of the hook-and-loop fasteners in the middle of the crossbar and at the corners. Once the goal net is correctly positioned, the hook-and-loop fastener can be closed around the front of the frame. The sleeve should be fastened as tightly as possible around the goalposts and should not have any wrinkles. If necessary, make small corrections by opening the hook- and-loop fasteners and closing them again after adjusting. Finally, thread the pull-through ropes (15) around the rods and through the mesh at the base of the rear goal frame. -
Securing the goal in position
Finally fix the goal frame by means of the pegs (20) on the ground. Ascertain that the ground is suitable for the application of pegs (e.g. no water pipes for sprinkler devices!). Make sure that the pegs are completely driven into the ground and have firm position. Avoid protruding fastenings (risk of stumbling). On too hard grounds the goal must be saved by appropriate measures in another way against overturning in order to prevent risk of injuries (e.g. with slabs or sandbags). Never play with an unsecured goal or never leave the goal unsecured respectively.
USAGE INSTRUCTIONS
- Only set up the goal on level ground.
- Please keep a minimum distance of at least 3 m to any surrounding obstacles.
- Secure the goal to keep it from toppling over – even if not in use.
- Avoid exposing the product unnecessarily to bad weather conditions. Keep it in a cool and dry storage area.
- Check for any rust on the product and remove it immediately. Pushing together the metal parts could lead to the protective layer being scratched and rust developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www.hudora.de). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. You can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>