V I V O STAND-V155C Single Wide Screen TV Desk Mount Instruction Manual

June 12, 2024
V I V O

V I V O logo Single Wide Screen TV Desk Mount
Instruction Manual

V I V O STAND V155C Single Wide Screen TV Desk Mount  SKU: STAND-V155C

STAND-V155C Single Wide Screen TV Desk Mount

https://vivo-us.com/products/stand-v155c

 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo- us.com/products/stand-v155c
GET IN TOUCH Monday-Friday from 7:00am-7:00pm CST

****| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious  injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

  • NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
  • USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

V I V O STAND V155C Single Wide Screen TV Desk Mount -
fig

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
4

STEP 2
OPTION A: Clamp Installation
Slide cable management clip (E) and decorative cover (F) onto pole (B). Thread pole (B) into base of clamp (D) until snug, then back off until the mounting holes are facing forward. Tighten grub screws with allen wrench (J) as shown in diagram. Slide decorative cover (F) down. Apply rubber pads (H) as shown in diagram. Secure clamp (D) to desk.

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
5

OPTION B: Grommet Base Installation
Remove screw and plate from clamp (D) as shown in diagram. Apply rubber pads (H) to the bottom of grommet base (G) as shown in diagram. Slide cable management clip (E) and decorative cover (F) onto pole (B). Thread pole (B) into grommet plate (G) until  snug, then back off until the mounting holes are facing forward. Tighten grub screws with allen wrench (J) as shown in diagram. Slide decorative cover (F) down. Slide grommet plate (I) onto hand crank. Insert hand crank through grommet hole from bottom and into grommet base (G).

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
6

STEP 3
75x75mm up to and including 200x200mm Pattern: Arms (L, M) will not be used. Follow diagram below to see which holes to use VESA Plate (A).

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
7

300x300mm or 400x400mm Pattern: Attach arm (L, M) to VESA Plate (A) with screws (N) as shown in the diagram.

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
8

300x200mm or 400x200mm Pattern: Attach arm (L, M) to VESA Plate (A) with screws (N) as shown in the diagram.

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
9

STEP 4
OPTION A: Flat Back Monitor
Attach VESA plate (A) to back of TV with screws (M-A, M-B) and washers (M-F, M-G). Make sure the two keyholes on back have the small end facing up.

OPTION B: Curved Back Monitor
Attach VESA plate (A) to back of TV using screws (M-C, M-D, M-E), washers (M-G), and spacers (M-H, M-I) depending on your TV’s requirements as shown in diagrams. Make sure the two keyholes on back have the small end facing up.

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
11

STEP 5
Insert bolts (O) into pole (B) at desired height, making sure there are 3 holes unused between bolts.
Thread nuts (P) onto bolts leaving 3mm of thread exposed behind bolt heads. Hang VESA plate (A) with TV onto bolts, and tighten with 4mm Allen wrench (K) and wrench (Q).

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
12

STEP 6
Store allen wrenches (J, K) in cable clip (E) as shown in diagram.

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
13

STEP 7
Manage cables using cable clip (E). Loosen the nuts on VESA Plate (A) using Wrench (Q) to adjust the tilt.

V I V O STAND V155C Single Wide Screen TV Desk Mount - fig
14

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 06/08/2022 REV1.3

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---
 www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
****help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:
www.vivo-us.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

V I V O User Manuals

Related Manuals