Furbo Mini Pet Camera User Guide
- June 12, 2024
- Furbo
Table of Contents
Quick Start Guide
Setting up your Furbo Mini
-
Plug in your Furbo Mini
-
Check for a blinking yellow light before proceeding
https://F0ps.apple.com/us/app/furbo-dog-
camera/id999707163
- Download the Furbo app to continue the setup
or
- Click “+” on the homepage to add a new device and continue the setup.
Place or mount your Furbo Mini
To mount on the wall:
To remove:
Status indicator
Starting Up
Standby Mode
Ready for Setup
Live View Mode
No Wi-Fi Connection
Need help?
Live chat support
http://help.furbo.com
Scan QR code to contact us
or email us at support@furbo.com
Chat with our support agent if you have any questions or comments.
Safety Information
ALWAYS unplug your USB cord before attempting to clean your Furbo Mini. Do NOT allow small children to operate Furbo Mini. Do NOT use a USB cord that is not provided in the Furbo Mini box, as it may risk damaging the Furbo Mini. Do NOT use Furbo Mini if you see any damage to the camera, the USB cord, or the plug. If you see damage, please contact support@furbo.com. Do NOT place your Furbo Mini close to flammable materials. Do NOT keep your Furbo Mini in hot temperatures (>120°F) or under prolonged exposure to direct sunlight. Do NOT submerge your Furbo Mini in any kind of liquid. Do NOT try to disassemble any of Furbo Mini’s parts for risk of electrical shock. Immediately discard broken or chewed-on parts as they may be a choking hazard to your pet. Secure Furbo Mini by placing it on an even and stable surface. Secure power cord away from your pet to prevent it from being walked on, pinched, or chewed on.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
For Canada
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada
(IC) radio frequency exposure limits. The Wireless Device should be used in
such a manner such that the potential for human contact during normal
operation is minimized.
This device has also been evaluated and shown compliant with the IC RF
Exposure limits under mobile exposure conditions. (antennas are greater than
20cm from a person’s body).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>