V I V O STAND-TV03E2 Dual Screen Mobile TV Cart Instruction Manual

Dual Screen Mobile TV Cart
Instruction ManualSKU: STAND-TV03E2

STAND-TV03E2 Dual Screen Mobile TV Cart

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

https://vivo-us.com/products /stand-tv03e2

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

PACKAGE CONTENTS

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS

STEP 1
Attach Casters (I) to Long Feet (A) and Short Feet (B) using Wrench (T-D).

STEP 2
Assemble Long Feet (A) and Short Feet (B) toBase (C) using M6x60mm Screws (S-A) and M6 Socket Plates (S-B). Tighten using 5mm Allen Wrench (T-C).
NOTE: Make sure Long Feet (A) are in the front of Base (C) and Short Feet (B) are in the back.

STEP 3
Thread Pole Connectors (G) onto bottom Poles (E). Carefully thread the pole connector in perfectly straight to avoid cross-threading. If you feel resistance, back the connector out and restart. Once you are certain the connector is going in straight, use additional force to tighten. Assemble Bottom Poles (E) to Base (C) using M6x10mm Screws (S-C) in the back.
NOTE: Pole Connector (G) threads are very fine and could be sharp. It may be helpful to grip Pole Connector (G) with a cloth or towel to produce sufficient force in order to thread into the poles.

STEP 4
Slide Base Cover (D) over Bottom Poles (E) onto Base (C).

STEP 5
Thread Top Poles (F) onto Pole Connectors (G) and insert the Pole Covers (H) into the top.

STEP 6
Slide Universal Plate Connectors (J) and Plastic Spacers (K) onto Top Poles (F) and tighten the set screw using 2.5mm Allen Wrench (T-A).

STEP 7
Assemble Universal Plates (L) to Universal Plate Connectors (J) with M6x10mm Screws (S-C) and M6 Washers (M-I). Tighten using 4mm Allen Wrench (T-B).

STEP 8
Clip Level (T-E) onto Universal Plate (L). Adjust the level of Universal Plate (L) by loosening the set screw in the back of Universal Plate Connectors (J) using 2.5mm Allen Wrench (T-A). Tighten the set screws again once you’ve reached desired height and level.

STEP 9
Secure Right VESA Bracket (M) and Left VESA Bracket (N) to the back of your television using Screws (M-A through M-G) and Washers (M-H through M-J), depending on the size of the mounting holes on the television. For curved or recessed TVs, Spacers (M-K through M-M) may be required.

STEP 10
Assemble VESA Brackets (M, N) to Universal Plate (L). Tighten the security screws on the bottom of VESA Brackets (M, N) to secure the television to the stand.

STEP 11
If additional leveling and height adjustment is required after television is attached, repeat step 8.

STEP 12
For wire management, cables can be run through the tops of the Pole Covers (H) and through the cables management slots in the back of Bottom Poles (E) down through Base (C).

STEP 13
Lift Base Cover (D) off of Base (C) and insert M5x6mm Set Screws (S-D) into the inside holes of Base (C).

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 05/23/2022
REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo- us.com

309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
• Dual Screen Cart for 32" to 65" TVs – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>