HOPER LAYER HD-09 High-Speed Hair Dryer Instruction Manual
- June 12, 2024
- HOPER LAYER
Table of Contents
High-Speed Hair Dryer
HD-09
Thank you
for purchasing our product!
Please carefully read and keep this user manual.
Safety Precautions
To reduce the risk of malfunction, electric shock injury, fire, and equipment or property damage, please be sure to read the following safety precautions.
Warning symbols
The following signs are used to analyze and describe the danger, injury and
property damage caused by ignoring the sign description and improper use:
Warning
Indicates a potential hazard that could cause serious injury or death
Notice
Indicates a danger that may cause minor injuries or property damage
The following signs are used to classify and describe the types of
instructions that need to be followed:
This sign is used to remind users of prohibited steps.
This symbol is used to remind users to pay attention to the operating steps
that must be followed in order to operate this product safely.
The illustrations in the safety precautions may differ from the actual product.
Warning
Do not use when the power cord or plug is damaged or hot.
-Otherwise, it may cause burns, electric shock, or fire due to short circuit.
Do not use when the power plug inserted into the socket is loose.
-Otherwise, it may cause burns, electric shock, or fire due to short circuit.
Do not damage or modify, or forcefully bend, pull, or twist the power cord. In
addition, do not place heavy objects or squeeze the power cord.
-Otherwise, it may cause burns, electric shock, or fire due to short circuit.
Do not use it with the power cord bundled.
-Otherwise, it may cause electric shock or fire.
Do not stay away when the power is turned on.
-Otherwise, it may cause a fire.
Do not connect the power plug to or unplug from the household power socket
when your hands are wet.
-Otherwise, it may cause electric shock and injury.
Do not use with wet hands.
There may be electric shock or fire due to short circuit.
Do not use near liquefied petroleum gas or other flammable products (such as
volatile agents. paints thinners. sprays. etc )
-Otherwise it may cause explosion or fire.
Do not block or insert foreign objects such as hairpins into the air outlet,
air inlet, and ion-poor emitter.
-Otherwise it may cause burns, electric shock or fire.
Do not place or store near the bathroom sink, water or other places filled with
liquids and high humidity.
-Otherwise, it may cause explosion.
Do not wrap the power cord around the body and handle during storage.
-Otherwise, the power cord may be disconnected, burns, electric shocks, or short-circuits may result.
Do not store it within the reach of children and infants.
Do not let children and infants play.
-Otherwise, it may cause burns, electric shocks and injuries.
Warning
Do not repair, disassemble or modify the hair dryer yourself.
-Otherwise, it may cause injuries. When repairs are needed please contact the customer service center.
Do not soak the hair dryer in water.
Do not use this hair dryer in the bath or shower.
Do not use this hair dryer near a bathtub, sink basin, or other utensils
containing water.
-Otherwise, it may cause electric shock.
The above symbol means ‘Do not use when or showering’
In the event of an abnormality or failure, please stop using it immediately
and unplug the power supply. Using this product in this situation may cause
electric shock, injury or fire.
Warning
Properly dispose of the packaging and power plug protector of this product
to keep it away from children.
-Otherwise it may cause accidents such as suffocation of babies and young children.
This product is not suitable for use by persons with physical, sensory, or
mental disabilities, or persons who lack experience and knowledge (including
children). A guardian must supervise and guide the use of this product, and be
responsible for the safety of the user. Adults should take care of children
and ensure that they do not play with this product.
-Otherwise, it may cause accidents or injuries.
Notice
Avoid dropping the hair dryer or subjecting the hair dryer to strong
shocks, which can cause electric shock or fire.
During use, the air outlet and nozzle may become hot, please do not touch it
with your hands.
-Otherwise it may cause burns.
Do not use it when the air inlet is damaged.
-Otherwise, the hair may be caught in the air inlet and cause damage to your hair.
Do not use on babies.
-Otherwise it may cause burns.
Do not store the power cord when it is twisted.
-Otherwise, it may cause the power cord to be disconnected, further causing an electric shock or a fire due to a short circuit.
Please use it only for blow-drying and styling.
Please do not use it for pets or to blow dry shoes and clothing
-Otherwise it may cause burns or fire.
Please keep a distance of more than 10 cm between the air inlet and your hair.
Otherwise it may cause the hair to be sucked into the hair dryer and cause
damage.
Please keep a distance of more than 6cm between the air outlet and the hair.
-Otherwise it may cause hair burns.
Description
This hair dryer comes with an overheating protection device, which can
automatically switch to cold air when the temperature of the hair dryer is too
high.
At this time, immediately turn off the power switch and unplug the plug from
the power socket, let it cool down for a few minutes before using it. Check
the air inlet and outlet for any blockage, and then turn on the power switch.
Product description
Steps for usage
Before using this product, check the air inlet and outlet to ensure that they are not blocked by fluff, hair or other items. First plug in the power plug, the blue green purple red four-color mode indicator light will flash and the product will enter the standby mode. Lightly press the mode button to enter the cold air mode -caring mode normal mode- quick drying mode cycle, you can choose the appropriate mode according to your need. Press and hold the mode button for 2 seconds to shut down. Flick the wind speed adjustment key up and down to adjust the appropriate wind speed.
Concentrator nozzle installation and removal
- To install the attachment. Place the nozzle into the annular air outlet, the magnetic air nozzle will automatically snap onto the air outlet. The nozzle can rotate 360 degrees.
- You can remove the air nozzle from the annular air outlet with a little bit of force and the nozzle will detach easily.
Cleaning and maintenance
Clean the hair dryer when it gets dirty.
Use a slightly dampened soft cloth with tap water or soapy water to clean the
case.
Notice
-
Clean the hair dryer when it gets dirty.
Use a slightly dampened soft cloth with tap water or soapy water to clean the case. -
When storing the hair dryer, if there are still hair care products or cosmetics sticking to the handle or body it may degrade the plastic, causing discoloration, cracking and even malfunction.
First unscrew the first layer of air intake grille in the direction of the arrow. -
Use a paper towel or toothbrush to remove dust or hair and other attachments at the air inlet.
Do not press or rub the air inlet with your nails or sharp objects, otherwise the air inlet may be damaged.
-
Use paper towels or toothbrush to remove dust or hair and other attachments on the first layer of mesh cover, or rinse with water to drain.
◀ Please clean the air inlet at least once a month.
Troubleshooting
Faults| Possible
reason| Corrective
Action
---|---|---
Unstable air temperature while using hot air mode.
Apperance of non-dangerous spark caused by
temperature protection device.| •When the air inlet and outlet are blocked by
dust, the thermal protection device will be activated and the air temperature
will turn cold as a result.
•The air inlet is blocked by hair, hands, etc.| •Remove the accumulated dust.
•Do not block the air inlet.
Abnormal hot air temperature.
Overheating power plug or power cord.
Unstable operation, air speed or volume.| Lose power conneciton with the plug
and the socket.| Check and reconnect power.
There is no air coming out but the heating is on. Visible red color on the
inside.| The power cord is damaged.| Please stop using it immediately.
The power cord is overheated.| .| Please stop using it immediately
Abnormal sounds and vibrations during the operation.
The product body and handle are overheated.| | Please stop using it
immediately.
The product body and handle are deformed.
There is a burning smell during operation.
Product name: Hair dryer
Product Model: HD-09
Rated power: 1800W
Rated voltage: 220-240V, 50Hz
Importer’s name: FRANK AND ANDY TRADING PTY LTD
Company addres: Unit 1/30 Edwards Street，Burwood VIC 3125
Importer code: EESS-E8151
Cusomter Service Tel: +610370167996 +61406198737
Email:[email protected]
Cusomter Service
Email:[email protected]