HOPER LAYER YS-30 Multifunctional Kettle Instruction Manual

HOPER LAYER YS-30 Multifunctional Kettle Instruction Manual

Function Button

In order to ensure safety and avoid injury and financial loss to you and others, please be sure to observe the following safety precautions. Failure to follow the safety warnings and misuse may lead to accidents, please be sure to observe them

Absolutely Forbidden Action Items

Must Follow Action Items

Daily Attention Action Items

1. Please place it out of the reach of children. Children are not allowed to operate alone to avoid electric shock or burns,
2. It is forbidden to insert metal flings, iron wires, needles and other foreign objects inside the product or in the gap, otherwise it will cause electric shack or abnormal operation
3. When cleaning, when the product fails or is not in use, be sure to unplug the power plug to prevent leakage or accidental start-up.
4. Do not put this product directly on the fire or any place near the heat source or fire source, otherwise the product will be damaged or malfunction, or even dangerous.
5. Please do not put this product on the table surface that is unstable, humid, high temperature, smooth and heat-resistant [such as plastic tablecloth, cotton cloth, carpet, etc.) to avoid electric shock, fire, falling off and other injuries and property losses.
6. Please use a power sacket with a rated current of 10A and above and an AC voltage of 220-240V alone to avoid accidents such as fire and electric shack
7. Do not insert or pull out the plug with wet hands to avoid electric shock. When pulling out the plug, you must hold the hande of the plug, and do not pull the power cord, otherwise the power cord will be easily damaged
8. If the power cord is damaged, it must be replaced with a special cord or a special camponent purchased from its manufacturer or maintenance department.
9. Persons with pacemakers or users of hearing aids or cochlear implants s hould consult an authorized medical practitioner and refer to the instructions provided with the medical device when using this product.
10. Before use, you must ensure that the power cord is connected to the socket reliably, otherwise the device will be damaged due to poor contact, resulting in dangers such as short circuit or fire.
11. This product is a Class | appliance, and the grounding wire of the socket must be well grounded.
12. This product is for household use only. The company is not responsible for any accidents or injuries caused by commercial use, inappropriate use, or non-compliance with this manual.
13. This product is only for indoor use, not in humid places or outdoors to prevent damage caused by electric shock and device aging
14. This product is not suitable for the following people: peaple with sensory or psychological dysfunction, lack of relevant experience or knowledge lincluding children] and other people. Unless they use this product under the supervision and quidance of a professional. Children should be supervised to ensure that they do not play with this product
15. Put the processed ingredients or medicinal materials into the inner tank, and add an appropriate amount of water for use (the amount of water added should not exceed 80% of the capacity of the inner tank, so as to prevent the water from overflowing after boiling). Please do not touch the high temperature parts such as the steam vent. If you need to open the cover, itis recommended to use a towel or heat-insulating gloves for heat insulation to avoid high temperature burns,
16. If the product fails, please send it to the after-sales service department for maintenance. Do not disassemble the product or replace the accessories by yourself to avoid fire. electric shock or injury.
17. After opening the package, please put the plastic bag into the trash can immediately to prevent children from playing and causing the danger of suffocation
18. Some peculiar smells may appear when the power is turned on for the first time, which generally lasts for a few minutes, which is a normal phenomenon.
19. The inner tank and the inner tank cover are fragile products, be careful to collide with hard objects or fall from a height to cause breakage.
20. After the inner pot starts to boil, do not add cold water directly to avoid the inner pot bursting due to thermal expansion and contraction due to sudden cold and heat
21. Itis necessary to keep the inside of the machine clean and free of debris, and the outer surface of the inner tank to be dry, and the inner tank to be placed up and down freely, so as not to affect the use effect.
22. When the body is not put into the inner tank or the inner tank s not put into food, do nat energize and dry it, 5o as to avoid damage to the components.
23. Do not splash water or soup into the smart medicated cooker to prevent short circuit of the circuit board
24. Avoid heating for oo long to bail the water dry. If the above situation accurs, please cut off the power source immediately, and add water after the inner tank is completely cooled, otherwise it will cause the inner tank to rupture
25. When not in use for a long time, please clean the smart medicated cooker and store it after drying
26. During the working process, o not move the product
27. The appliance shall not be immersed in or sprayed with water.

Statement

The inner pot, pot lid and small bowl are fragile items and are not covered by warranty.

Part Name

Operation Panel

Note: Please refer to the actual product picture in the package

Opera on Instruction

Function Button

In the standby mode, press the function button to select the functions of Chinese medicine, herbal tea, cook soup, and keep warm in turn. During this process, the corresponding function indicator light flashes, and the digital tube displays the required cooking time. After the function is selected, press the start/cancel button, and the machine will start to work according to the function you selected

Note: When selecting a function, you can select the “Preset”, “+” button, and “-” button to set the cooking time according to your own cooking needs, which is convenient for your use.

“+” button, “-” button

1. When the function button elected, press the “+” button and *-” button to set the timing time in units of 5 minutes,
2. After setting the timing time, press the start/cancel button, the machine will enter the corresponding working state, and the functional cooking time will be displayed in a countdown manner.

Cooking Schedule

Function| Chinese Medicine| Herbal Tea| Cook Soup| Keep warm
---|---|---|---|---
Time| 2 bowls| 3 bowls| 4 bowls| 1.5 hours| 3 hours| 5 hours
50mins| 70mins| 90mins

Note:

1. The above time is an approximate value of the total cooking time of each function. During the cooking process of the machine, please pay attention to the change of water volume to prevent dry burning. After the work is completed, the machine will automatically switch to the 5-hour keep warm state.
2. The function of traditional Chinese medicine cannot be timed. .

Water Volume

Used to select the amount of water to be added to the Chinese medicine function.
When the traditional Chinese medicine function is selected, press the water volume button to select the 2 bowls, 3 bowls, and 4 bowls functions in turn. The corresponding function indicator lights during this process flash, and the digital tube displays the required cooking time. After the function is selected, press the start/cancel button, and the machine will start to work according to the function you selected

Start/Cancel

1. In the standby mode, pressing this buttan has no effect. After selecting the function, press this button ta turn the machine into working mode.
2. In the working state, press this button to cancel the working mode and turn to the standby mode.

preset

1. In the standby state, press the function buttan to select the cooking function, or after the timer setting of the function is completed, you can press the preset button to set the cooking function
2. Press the “+” “-” buttons to set the time,
3. After setting the time, press the start/cancel button and the machine will enter the countdown state.

Note:

1. The preset time is the cooking completion time, and the maximum preset time is 24 hours.
2. The cooking time can be extended up to 8 hours.
3. The preset and g functions cannot be used for the keep warm function. 4.1f the machine is already in the working state, the keep warm mode, the standby mode, or the start state of the preset function, pressing this button is invalid.

Cooking

1. Before cooking, please wipe the machine, clean the inner pot and pot cover and ather accessories that need to be used, and dry the outer surface of the inner pot with a dry cloth.
2. Please put the prepared food or medicinal materials into the inner pot, and add an appropriate amount of water.
3. Put the inner pot filled with food or medicinal materials into the machine in the center.
4. Close the lid and plug in the power cord
5. Select the cooking function, prset the time, press the start / Cancel button, and the machine will follow your settings to start caok

Note:
When using this product for decocting the medicine, please decoct in strict accordance with the doctor’s instructions. The amount of water added can be measured by the small bowl attached to this product. The water absorption and output of different medicinal materials are different. Please pay attention to the decoction process. The amount of water changes, beware of drying out.

Care and  Mantenance

1. After use, the power plug must be unplugged, and then the standby body can be cooled before starting to clean.
2. The surface of the ceramic pot and the ceramic pot cover is smooth, and it can be cleaned with a soft cloth soaked in neutral cleaning solution
3. Do not wipe with banana water, gasoline, decontamination powder, hard brush o stainless steel wire ball, etc., 5o as not to damage the surface.
4. Do not put the whole machine into water for cleaning, the inside and outside of the machine can be wiped with a wrung wet cloth to avoid water ingress or electricity leakage and malfunction
5. Do not put the whole machine into water for cleaning, the inside and outside of the machine can be wiped with a wrung wet cloth to avoid water ingress or electricity leakage and malfunction
6. When the product is not used for a long time, please clean and dry the machine and save it

Product Specification

Packing list

Base| Inner pot| Bowl| Instruction
Manual| Power cord
---|---|---|---|---
1pc| 1pc| 1pc| 1pc| 1pc

Abnormal phenomenon judgment

centerfor maintenance

WARRANTY CERTIFICATE

Thank you for choosing HoperLayer products! Dear consumer! When buying the goods, pay attention to the accuracy of filling warranty certificates. Maintenance service is carried out only if a correctly filled warranty certificate is presented. The owners of the products are provided the maintenance service during 12 months from the purchase date. The warranty covers malfunctions that appear during the indemnity period, under condition of normal operation and correct handling. If the product is broken or you experience some difficulties in using it and require any help, you should address to the HoperLayer registered maintenance shop. The warranty does not cover:

1. natural ageing of products;
2. mechanical damage of products:
3. complementary parts, expendable material, packing and accessories;
4. products which have been inst operating guide requirements:
5. malfunctions caused by the water quality and scale deposit;
6. damages caused by using products for profit or by using them in public lled, operated or handled violating the places, and also, for other purposes which have not been provided for household needs. These products are designed for domestic use only;
7. malfunctions caused by a penetration of foreign items inside goods, and also, by heat impact on plastic and other not heat-resistant parts of products;
8. goods that have been under repair somewhere, except in the HoperLayer registered maintenance shops, including those repaired independently, and those that the owner has attempted to apen by themselves
9. damages caused by the imprudence or negligence, and as a result of a bad handling by the owner
10. Damages caused by circumstances beyond one’s reasonable control electric network pressure differences, fire, floading, accident and other force-majeure circumstances)

The maintenance service is provided only in the HoperLayer registered maintenance shops, and only in cases covered by the present warranty certificate. If there is any problem while using our products, address to one of our registered maintenance shops, or call the HoperLayer Customer Service.We hope that our products will serve you for a long time, and you will be happy with our service quality.

Pls upload related purchase information through www.hoper.com.au to enjoy honorable after-sale service and more benefits!

Importer: Frank And Andy Trading PTY LTD
Service Address: 40 Greenwood Street, Burwood, Vic 3125, Australia
Service Hotline: +61 03 7016 7996/+61 406 198 737
E-mail: Support@hoperlayer.com.au www.hoper.com.au

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>