CRYSTORAMA 710-OB-CL-S Two Light Ceiling Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #710-OB-CL-S
Instruction Manual
710-OB-CL-S Two Light Ceiling Mount
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes
You will need 2- Candelabra Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
-
Install the mounting bar onto the outlet box.
-
Raise the Frame up over the threaded nipple on the mounting bar.
After the wire connection is completed, Secure with the coupling. -
Screw the center stem onto the coupling and secure with the nut.
-
Adjust the hex nut along the bottom end of the center stem to allow the vase cap to stay in the correct position.
Secure the cap with the finial. -
Dress the crystals as illustrated.
Crystal Sets
A. 25Sets. (1)28mm + (1)26mm + (1)20mm + (1)16mm + (1)14mm
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
Part Numbers
A. (2)-Wire Connector
B. (1)-Mounting bar
C. (2)-Screw
D. (1)-Hex nut
E. (1)-Threaded nipple
F. (1)-Frame ; Ø10″ ; 25 pin holes ; with inner plate.
G. (1)-Coupling
H. (2)-Hex Nut
I. (2)-Socket
J. (1)-Center stem ; H 4 1/2″-XSN708OBSTEM4.5IN
K. (1)-Vase Cap ; Ø3″ ; 25 pin holes-XSN710OBCAP3IN
L. (1)-Finial-XSN708OBFIN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>