AIGOSTAR FN-D1713 Low Voltage Hard Strip Bar Light Instructions
- June 1, 2024
- aigostar
Table of Contents
AIGOSTAR FN-D1713 Low Voltage Hard Strip Bar Light
SPECIFICATIONS
This product contains a light source of energy efficiency class-(EU)2019/2015
WARNINGS
- Before installation, please turn off the power. This LED strip operates on low voltage DC24V and should not be connected to high voltage.
- The product uses DC5521 male and female connectors for connection. The maximum length for daisy-chaining using DC connectors is ≤5M.
- During the installation process, do not fold or twist the LED strip, and avoid connecting the strip with products from other manufacturers.
- The LED strip should be installed in a well-ventilated and heat-dissipating space. Do not install it on flammable surfaces or cover it with any objects. The strip has an IP20 rating for indoor use.
- The light source of this LED strip is not replaceable. When it approaches the end of its lifespan, the entire fixture needs to be replaced.
- During installation and use, it is strictly prohibited to apply a force exceeding 10N (1KG) to the DC5521 connectors and the body of the LED strip. Hold the strip by its body with your hand.
Installation Step 1
- Fix the round-hole screws on both ends of the LED strip (refer to Figure 1).
- Connect the male and female DC plugs of the 24V adapter, then power it on (refer to the diagram).
Installation Step 2
- Secure the screw fasteners (refer to Figure 2-1/2-2).
- Connect the male and female DC plugs of the 24V adapter, then power it on (refer to the diagram).
- The barcode for the accessory package is 8433325317133.
Disassembly diagram of the lamp body.
ITALIA MARKET SRL
VIA DELLE INDUSTRIE, 9/1
20883 MEZZAGO(MB), ITALIA
P.IVA: IT10502730962
WWW.AIGOSTAR.COM
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>