Godex XMic10L XLR Cardioid Condenser Microphone Instruction Manual

June 9, 2024
Godex

Godex XMic10L XLR Cardioid Condenser Microphone

Foreword

Thank you for purchasing!
Xmic1 DL is a professional microphone powered by 48V phantom power. Built-in 25mm gilded diaphragm reduces noise and brings accurate audio output. The cardioid-directed condenser is perfect for both human voice and instrument recording. Universal XLR connecting ports can prevent other interferences and ensure smooth signal transmission. It supports various mainstream sound cards and lives streaming APPs and can be widely used in broadcast studios, recording studios, and live to-stream. Fashion style and zine-alloy shell also make it more attractive.

Please read the Instruction Manual carefully before using it to make sure of the correct operation and usage.

Feature

  • Cardioid directivity, automatic noise reduction.
  • Frequency response is specially adjusted for human voices in different ranges.
  • 48V phantom power supply through XLR cable.
  • 25mm gilded diaphragm to restore the original sound.
  • The metal shell structure is practical and durable.
  • The shock-absorbing bracket is 360° rotatable and all-around protective.

Warning

  • This product is a high-precision instrument, please avoid falling, collisions,s or pounding.
  • Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center.
  • Always keep this product dry. Do not use it in rain or damp conditions.
  • Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid, or dusty.
  • Keep out of reach of children.
  • Do not use it in flammable and explosive environments. Pay attention to the relevant warning signs.
  • Do not leave or store the product if the ambient temperature reads over 40c.
  • Please read carefully and follow the warnings or instructions provided by the manufacturer.

Structure of Product

How to Connect

Directivity

What’s in the Box

  • Microphone x1
  • Shock-absorbing bracket x 1
  • XLR connecting cable x1
  • Cable tie x1
  • Instruction Manual x1
  • Desiccant x 1

Technical Data

  • Model XMic10L
  • Connecting Port XLR
  • Diaphragm 25mm gilded
  • Microphone Type Condenser
  • Directivity Cardioid
  • Sensitivity -36dB±2dB (0dB=1V/Pa, 1KHz)
  • Max. Sound Pressure Level 140dB (1kHz, THD<1%)
  • Signal-to-Noise Ratio 75dB (A-Weighted, 1 KHz, Pa)
  • Frequency Bandwidth 20Hz-20KHz (±3dB)
  • Power Supply 48V
  • Rated Current 3mA
  • Internal Impedance 50
  • Rated load Impedance >1000
  • Equivalent Noise 16dB
  • Dimension 52*151mm
  • Net Weight 416g

Troubleshooting

No sound

  1. Please check whether the microphone cable is correctly connected, or unplug and re-plug.

Howling

  1. Please check whether the microphone Is directly facing the speaker;
  2. Please check whether the microphone is too close to the speaker, and keep the distance at least 1.5 meters.

Noise

  1. Please check whether the microphone cable is correctly connected, or unplug and re-plug.
  2. Please check whether the mouth is too close to the microphone, and keep the distance around 10 to 20 millimeters with 45 degrees of inclination angle.

Maintenance

Keep dry
This product is not water-proof. Malfunctions, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity.

Avoid sudden temperature changes
Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with a higher temperature outside in winter. Please put the product in a handbag or plastic bag beforehand.

Keep away from a strong magnetic field
The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction.

FCC STATEMENT CAUTION

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

GODOX Photo Equipment Co, Ltd. hereby declares that This equipment is in compliance with the essential requirements and other relevant provisions of EU Directive 2014/30/EU. They are allowed to be used in all EU member states. For more information on DoC, Please click this web link: http://www.godox.com/DOC/Godox_XMic10L_DOC.pdf.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!Godex-XMic10L-XLR-Cardioid-
Condenser-Microphone-fig- \(5\)

Note: This form shall be sealed by the seller.

Applicable Products

The document applies to the products listed on the Product Maintenance information {see below for further information). other products or accessories (e.g. promotional items, giveaways, and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day (purchase date) when the product is bought for the first time, and the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Seivlce
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:

  1. The product or accessory has expired its warranty period;
  2. Breakage or damage caused by inappropriate usage, maintenance, or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by an external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding, and damp environments, etc;
  3. Breakage or damage caused by the non-authorized institution or staff in the process of installation, maintenance, alteration, addition, and detachment;
  4. The original identifying information of the product or accessory is modified, alternated, or removed;
  5. No valid warranty card;
  6. Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software;
  7. Breakage or damage caused by force majeure or accident;
  8. Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories, and software that are beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion, and consumption are not breakage within the maintenance scope.

Maintenance and Service Support information
The warranty period and service types of products are implemented according to the following Product

Maintenance Information:Godex-XMic10L-XLR-Cardioid-Condenser-Microphone-
fig- \(6\)

GodoxAfter-sale Service Call
0755-29609320-8062.

WeChat Official AccountGodex-XMic10L-XLR-Cardioid-Condenser-Microphone-
fig- \(4\)

GODOX Photo Equipment Co., Ltd.
Add.:
Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen 57 87 03, China.
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423 E-mail: godox@godox.com.
Website: www.godox.com.

Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals