Woohlab WL001 Smart LED Light Bar User Manual
- June 16, 2024
- Woohlab
Table of Contents
Woohlab WL001 Smart LED Light Bar User Manual
Directions for Use
Step 1: Plug in the painter light
Connect the light’s cable to the control box.
Next, connect the adapter cable to the port on the control box and plug the
other end into a power outlet. When plugged into an outlet, the power
indicator light will turn blue.
Step 2: Light it up
Press the Power button to turn on the light.
Step 3: Download the Woohlab app
Download the Woohlab app on your smartphone and create an account.
IOS: Download the Woohlab app on App Store.
Andorid: Download the Woohlab app on Google Play.
Step 4: Connect the device to the Woohlab app
Follow the steps in the Woohlab app to connect your device.Your phone’s
Bluetooth must be turned on to find and properly connect to the light.
Note: If you can’t connect to the device, press and hold the Power
Button until the power indicator light flashes 3 times.
This will reset the Bluetooth pairing setting.
Next, press the Rescan link on the Woohlab app to start reconnecting the
device.
Buttons Control
App Control Functions
Rotating: To adjust the direction of the painter light rotation, select either Positive or Negative or choose to keep the light Static. The rotating speed can also be adjusted.
Timer: Adjust the Timer setting.
For example, if you select “1 hour” and then “Save,” the timer indicator on
the control box will light up, and the painter light will automatically turn
off after 1 hour.
To modify this time setting, select “Set” .
To turn off the timer function, select “Cancel”.
Mode: Choose your favorite light mode. Options include Static, Breathe, Marquee, Gradient, and Rhythm.
The sensitivity and speed can also be adjusted when you select the light mode
except for static mode.
Painter Light Color Setting:
You can choose any light color from the Basic colors and My colors options.
Basic colors:
Red, Greeen, Blue and Warm White.
My colors:
You can add your favorite colors from the Color Wheel into My colors.
Save the Painter Light Effect Settings
Once you finish customizing the painter light effect settings, you can save
and name the customization.
The saved lighting effect can be found under My Favorites in Lighting
Effect.
Create a Scene
You can customize the start and end times of the light by creating a scene.
Select from effects in Effect or My Favorites to choose lighting for your
scene.
Share the Painter Light Effect
To save and share custom light effect settings, select “Share”.
You’ll be prompted to name the setting, and then the effect will be saved in
My Favorites within Lighting Effect on the mobile app. The settings
will also be automatically shared to the Light Studio.
Share Your Lighting Effect With Friends
Generate a QR code for your lighting effect and save it to your mobile phone.
Your friend can then scan the QR code you shared and apply the lighting effect
to their own light.
Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The distance between user and products should be no less than 20cm.
FCC ID 2A6UYWX001.
Scan QR code for product usage video.
Woohlab
www.woohlab.com
Contact us at support@woohlab.com.
Our team of experts can help you resolve any issues.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>