CRYSTORAMA 710-EB-CL-I Two Light Ceiling Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA 710-EB-CL-I Two Light Ceiling Mount
WARNING
-
Electrical Danger
-
Turn Power Off
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 2- Candelabra Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Install the mounting bar onto the outlet box.
- Raise the Frame up over the threaded nipple on the mounting bar. After the wire connection is completed, Secure with the coupling.
- Screw the center stem onto the coupling and secure with the nut.
- Adjust the hex nut along the bottom end of the center stem to allow the vase cap to stay in the correct position. Secure the cap with the finial.
- Dress the crystals as illustrated.
Dimension
Crystal Sets
A. 25Sets. (1)28mm + (1)26mm + (1)20mm + (1)16mm + (1)14mm
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov
Part Number
Part Numbers
- A. (2)-Wire Connector
- B. (1)-Mounting bar
- C. (2)-Screw
- D. (1)-Hex nut
- E. (1)-Threaded nipple
- F. (1)-Frame ; 010″ ; 25 pin holes ; with inner plate.
- G. (1)-Coupling
- H. (2)-Hex Nut
- I. (2)-Socket
- J. (1)-Center stem ; H 4 1/2″-XSN708EBSTEM4.5IN
- K. (1)-Vase Cap ; 03″ ; 25 pin holes-XSN710EBCAP3IN
- L. (1)-Finial-XSN708EBFIN
Customer Service
