HIKVISION HWI-T229H Network Camera User Guide
- June 10, 2024
- Hikvision
Table of Contents
HIKVISION HWI-T229H Network Camera
Product Information
- The Network Camera is a high-quality camera designed for outdoor use. It features a waterproof design, making it suitable for use in all weather conditions. The camera supports LAN and PoE interfaces, as well as DC12V and AC24V power inputs. The camera also comes with a MicroSD card slot for local storage.
- The Network Camera has an audio input and output interface, as well as alarm input and output interfaces. It also features an RS-485 interface and a BNC/CVBS interface for grounding.
- The camera complies with part 15 of the FCC Rules and operates under Industry Canada regulations. It is recommended to use an antenna of a type and maximum gain approved for the transmitter by Industry Canada to reduce potential radio interference to other users.
Product Usage Instructions:
- Activate the camera by plugging it into a power source.
- Connect the camera to your network using the LAN or PoE interface.
- Insert a MicroSD card into the camera’s MicroSD card slot to enable local storage.
- Connect the camera’s audio input and output interfaces to external speakers and microphones, if desired.
- Connect the camera’s alarm input and output interfaces to external alarm systems, if desired.
- Ground the camera using the BNC/CVBS interface.
- If necessary, adjust the camera’s antenna to reduce potential radio interference to other users.
- Access the camera’s live feed using your preferred device or software.
Note : For more detailed instructions on how to access and use the camera’s features, refer to the User Manual provided with the product.
INSTALLATION INSTRUCTION
Waterproof
Activate and Access Network Camera
Description
| Interface | Description |
|---|---|
| LAN(PoE) | Network interface, PoE supported |
| DC12V, AC24V | Power input interface |
MicroSD
| MicroSD card slot
Insert the MicroSD card for local storage
RESET| One-key reset button
AUDIO IN| Audio input interface
AUDIO OUT| Audio output interface
ALARM IN
| Alarm input interface
IN1 and GND1, IN2 and GND2
are two pairs of alarm inputs
ALARM OUT
| Alarm output interface
1A and 1B, 2A and 2B, 3A and 3B are three pairs of alarm outputs
RS-485| D+ or D- connect to 485
DC12V, GND
/ DC
12V_OUT
|
Power output interface
BNC| BNC/CVBS interface
| Grounding
Note : The interface varies with the models. Please refer to the product
datasheet for details.
© 2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (https://www.hikvision.com). Please use this user manual under the guidance of professionals.
Trademarks
Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Other trademarks and logos mentioned are the properties of their respective owners.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Disclaimer
-
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. -
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
-
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC compliance : This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Wi-Fi device:
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: Due to the device size, FCC compliance statement and warnings will be listed in the manual.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the LVD Directive
2014/35/EU, the RoHS Directive 2011/65/EU, Wi-Fi device: the RE Directive
2014/53/EU 2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the purchase
of equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point. For
more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
Wi-Fi device:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
Safety Instruction
These instructions are intended to ensure that the user can use the product
correctly to avoid danger or property loss.
Laws and Regulations
The device should be used in compliance with local laws, electrical safety
regulations, and fire prevention regulations.
Electricity
In the use of the product, you must be in strict compliance with the
electrical safety regulations of the nation and region. The equipment shall
not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the equipment. Provide a surge
suppressor at the inlet opening of the equipment under special conditions such
as the mountain top, iron tower, and forest. CAUTION: To reduce the risk of
fire, replace only with the same type and rating of fuse.
Battery
Do not ingest battery. Chemical burn hazard! This product contains a
coin/button cell battery. If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can lead to death. Keep new
and used batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children. If you
think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention. CAUTION: Risk of explosion if the
battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions. Improper replacement of the battery with an incorrect
type may defeat a safeguard (for example, in the case of some lithium battery
types). Do not dispose of the battery into fire or a hot oven, or mechanically
crush or cut the battery, which may result in an explosion. Do not leave the
battery in an extremely high temperature surrounding environment, which may
result in an explosion or the leakage of flammable liquid or gas. Do not
subject the battery to extremely low air pressure, which may result in an
explosion or the leakage of flammable liquid or gas. + identifies the positive
terminal(s) of equipment which is used with, or generates direct current. –
identifies the negative terminal(s) of equipment which is used with, or
generates direct current.
Fire Prevention
No naked flame sources, such as lighted candles, should be placed on the
equipment. The serial port of the equipment is used for debugging only. Hot
Surface Prevention
CAUTION : Hot parts! Burned fingers when handling the parts. Wait one-
half hour after switching off before handling parts. This sticker is to
indicate that the marked item can be hot and should not be touched without
taking care. For device with this sticker, this device is intended for
installation in a restricted access location, access can only be gained by
service persons or by users who have been instructed about the reasons for the
restrictions applied to the location and about any precautions that shall be
taken.
Installation
Install the equipment according to the instructions in this manual.
Power Supply
Device powered by Safety Extra-Low
Voltage(SELV): The power source should meet limited power source or PS2
requirements according to IEC 60950-1 or IEC 62368-1 standard. Device powered
by AC mains supply voltage: The equipment must be connected to an earthed
mains socket-outlet. An appropriate readily accessible disconnect device shall
be incorporated external to the equipment. An appropriate overcurrent
protective device shall be incorporated external to the equipment, not
exceeding the specification of the building. An all-pole mains switch shall be
incorporated in the electrical installation of the building. Ensure correct
wiring of the terminals for connection to an AC mains supply. The equipment
has been designed, when required, modified for connection to an IT power
distribution system.
White Light Illuminator (If supported)
Possibly hazardous optical radiation emitted from this product. DO NOT stare
at operating light source. May be harmful to the eyes. Wear appropriate eye
protection or DO NOT turn on the white light when you assemble, install or
maintain the camera.
Transportation
Keep the device in original or similar packaging while transporting it.
System Security
The installer and user are responsible for password and security
configuration. Maintenance
If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance. A few device components (e.g.,
electrolytic capacitor) require regular replacement. The average lifespan
varies, so periodic checking is recommended. Contact your dealer for details.
Cleaning
Please use a soft and dry cloth when clean inside and outside surfaces of the
product cover. Do not use alkaline detergents.
Using Environment
DO NOT place the camera in extremely hot, cold, dusty or damp locations, and
do not expose it to high electromagnetic radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center. Time
Synchronization
Set up device time manually for the first time access if the local time is not
synchronized with that of the network. Visit the device via Web browse/client
software and go to time settings interface.
Reflection
Make sure that no reflective surface is too close to the device lens. The IR
light from the device may reflect back into the lens causing reflection.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>