HYTOBP S179 4K Drone with Camera User Guide

HYTOBP S179 4K Drone with Camera

PRODUCT INFORMATION

Contact Information

• Email: hytobp@htwlkj.net
• Website:  https://www.hytobp.net
• Phone: +1 602-563-6540
  Before using the product, please read this instruction manual carefully and try to choose to fly in an environment with good air and light. This will ensure the normal operation of GPS mode and optical flow mode.

Quick Reference
Scan the QR-code to get guide video.

• Download the fly App
• Watch the Tutorial Video
• View the Instructions For Use

FOLDABLE FOUR AXIS AIRCRAFT MANUAL

REMOTE CONTROL OPERATING INSTRUCTIONS

• The remote control features various controls such as fine adjustment keys, speed selection (slow, medium, fast), throttle control lever (up/down/left/right), camera control, power indicator light, and one-touch takeoff and landing. The rocker operates outward in the shape of 8 and starts, and is operated inward in the shape of 8, and reset.
• Introduction to remote control screen display icons includes signal strength, battery level, and speed settings.

AIRCRAFT CAN BE FOLDED

1. After the aircraft is taken out of the package, extend the four-axis arm to a fixed position.
2. Align the fan blade with the screw hole near the center of the motor and tighten the screw clockwise.

Battery Installation, Removal and Charging Instructions

1. Insert the battery module into the bottom of the aircraft fuselage.
2. Press the position indicated by the arrow to pull out the battery and take out the battery as shown in Figure 2.
3. Connect the lithium battery with the charging cable, and then connect the USB socket to the computer USB interface or the power adapter with USB interface for charging. The red indicator light is always on, and the indicator light is off when the battery is full. Charging time is about 2-2.5 hours.

Remote control battery installation
Remove the battery cover on the back of the remote control and install three 1.5V “AAA” batteries.

Precautions related to battery

• There are risks in the use of batteries, which may cause losses to people and property. The user shall bear all relevant responsibilities.
• If the battery leaks, avoid contact with skin and eyes, and seek medical attention immediately if necessary.
• If the charger has suspicious odor, noise, or smoke, unplug the power supply immediately.
• Observe all requirements to avoid fire, electric shock, or explosion.

Charge and Recycle

• Use the special charger distributed by the original factory. Do not use damaged chargers.
• Do not charge the battery if it is expanded, leaking, or damaged.
• Avoid charging the battery in extreme temperatures (0° C to 40° C).
• Do not treat the equipment as daily waste. Store damaged or unusable batteries in a specially designed container.

Accessories list

• UAV X1 (including battery)
• USB charging cable x1
• Remote control x1
• Wind blade x4
• Bolt Driver x1
• Instructions x1

Operating Instructions

Linking and Unlocking the Remote Controller and Aircraft

1. Push up the throttle control lever to start the aircraft propeller and then release to hover.
2. Turn the left throttle control lever to the lower left corner to rise the aircraft, and the right control lever to the lower right corner to hover.

Calibration and Aircraft Function Demonstration

• Inner eight calibration: Place the aircraft on a flat surface and move both control levers to the lower right corner to calibrate.
• One-key calibration: Press the one-button takeoff/landing key. The aircraft can take off/land.
• Directional control demonstration: Shows how to use the remote control levers to move the aircraft in different directions.

Additional Features

• Enter fine-tuning: Adjust flight attitude by pressing the trim button when the aircraft deviates during flight.
• Speed files (slow, medium, fast): Adjust the flight speed of the aircraft with the speed control button.
• Headless mode/one key back: Use headless mode to make the aircraft fly without needing to adjust for direction.
• 3D Rollover: Perform 3D rollovers when the aircraft is at a height of 3 meters.
• 360 obstacle avoidance mode: Turn on the obstacle avoidance function to safely fly in an environment with obstacles.

Camera Angle Adjustment
Adjust the camera angle on the aircraft using the corresponding control keys on the remote.

Pre-flight Environment and Precautions

• Choose an appropriate environment for indoor or outdoor flying, considering weather and space.
• Follow precautions to avoid damage to the aircraft or injury.

Problem solving and guidance

battery is installed according to the instructions.
The aircraft didn’t respond| Frequency matching between remote controller and aircraft is not completed.| Turn on the power supply of the aircraft and the remote control again, and align the frequency.
Aircraft flight state deviation| The aircraft is not placed on a horizontal plane or flies to one side.| Place the aircraft on a horizontal plane and adjust the remote control trim key.
The remote control of aircraft is not sensitive| The remote control is under low power or the aircraft is beyond remote control distance.| Replace the remote control battery or keep the aircraft within the effective remote control distance.

Frequently Asked Questions (FAQ)

• How do I charge the drone’s battery?
  Connect the lithium battery with the charging cable, then connect the USB socket to a computer USB interface or a power adapter with USB interface. The charging time is about 2-2.5 hours.

• What should I do if the battery leaks?
  Avoid contact with skin and eyes, wash with soap and water immediately, and seek medical attention if necessary.

• Can I use any charger to charge the drone’s battery?
  Only use the special charger distributed by the original factory. Using a damaged or improper charger can cause fire, electric shock, or explosion.

• How can I adjust the flight speed of the drone?
  Use the speed control button on the remote control to select slow, medium, or fast flight speeds.

• What is the ‘Headless Mode’ and how do I activate it?
  Headless mode allows the drone to fly without orientation. Activate it by pressing the headless mode button on the remote control.

Scan the QR-code to get guide video

REMOTE CONTROL OPERATING INSTRUCTIONS

Introduction to remote control screen display icons

AIRCRAFT CAN BE FOLDED

1. After the aircraft is taken out of the package, put the four-axis arm Extend out to a fixed position. (as shown in the figure)

2. Align the fan blade with the screw hole near the center of the motor (the arm identification should be consistent with the fan blade) and tighten the screw clockwise (as shown in the figure)

Battery Installation, Removal and Charging Instructions

1. To install the battery at the bottom of the aircraft, insert the battery module into the battery position of the aircraft fuselage (as shown in Figure 1)
2. To disassemble the battery at the bottom of the aircraft, press the position indicated by the arrow to pull out the battery and take out the battery (as shown in Figure 2)
3. After taking out the lithium battery at the bottom of the aircraft, connect the lithium battery with the charging cable, and then connect the USB socket Certace for charging teren the bartery is ri, the red indicator light is always on, and the indicator light is off when the battery is full. Charging tme is about 2-2.5 hours

Remote control battery installation

Remove the battery cover on the back of the remote control, and then refer to The electrode indication of the battery, correctly install 3 x1.5V”AAA” battery

Precautions related to battery

• there are certain risks in the use of batteries, which may cause significant losses to people and property, The user shall bear all relevant responsibilities. Manufacturers and dealers do not The use of (charging, discharging, storage, etc.) for control and not for personal and Liability for loss caused by property
• if the battery leaks, avoid contact with skin and eyes. In case of contact Wash skin with soap and water immediately. In case of contact with eyes, please immediately Wash with plenty of cold water and get medical attention immediately.
• if the charger has suspicious odor, noise or smoke, please unplug the power supply immediately.
• please strictly observe the following requirements, otherwise it will cause fire, electric shock or explosion

Charge

• the battery must use the special charger distributed by the original factory. It is strictly prohibited to use damaged or damaged charger for charging Its charger
• do not charge the expanded, leaking or damaged battery
• do not overcharge the battery. When the battery is fully charged, please unplug the charger. After charging, do not recharge the battery to avoid overheating.
• do not be near inflammables or in inflammable (carpet, wood floor, solid wood furniture, etc.) or guide Charge the surface of an electric object. Always observe the battery.
• do not charge the battery immediately after use.
• the temperature of battery charging shall be between 0 ° C and 40 ° C.

Recycle

• do not treat the equipment as daily waste. Damaged or unusable batteries should be stored In a specially designed container.
• this equipment consists of electronic components and batteries. Please refer to the special Requirements of.
• please be familiar with the local centralized waste treatment methods.

Accessories list

Please carefully check the parts and quantity. If it is not complete,
Please provide the shopping voucher and contact the seller in time for replacement.

Linking and Unlocking the Remote Controller and Aircraft

Frequency alignment between remote controller and aircraft After turning on the power switch of the remote control and the aircraft, wait for the remote control Automatic frequency synchronization with aircraft, waiting for remote control and aircraft. The power indicator changes from flashing to permanently on, indicating that the frequency alignment is completed.

Frequency matching screen display status

Linking and Unlocking

1. Push up the throttle control lever, the aircraft propeller starts to rotate, release the throttle control lever, push up the throttle control lever again, and the aircraft hovers at this position.
2. Turn the left throttle control lever to the lower left corner, and turn the right direction control lever to the lower right corner. The aircraft propeller starts to rotate. Push up the throttle control lever, and the aircraft rises to a certain position to hover

Inner eight calibration

Place the aircraft on the horizontal ground, tum the left throttle control lever to the lower right corner, and at the same time Move the joystick to the lower left corner, and the aircraft indicator light will turn on after flashing, indicating that the calibration is completed.

One-key calibration

• After the aircraft is unlocked,
• Press the one-button takeoff/landing key,
• The aircraft can take off/land.

Aircraft Function Demonstration

Important Note: the direction of the aircraft with the camera is the forward direction, And vice versa is the backward direction.

• When the left control lever throttle is pushed upward, the blade speed increases and the aircraft rises.

• When the left control lever throttle is pushed down, the speed of the wind blade slows down and the aircraft descends.

• Push the left contral lever (rudder) to the left and turn the aircraft nose to the left.

• Push to the right and tum the aircraft nose to the right.

• When the right joystick (rudder) is pushed up, the aircraft moves forward

• When the right control lever (rudder) is pushed down, the aircraft moves backward.

• When the right control lever (rudder) is pushed to the right, the aircraft body wil ty lo the right.

• When the fight control lever (rudder) is pushed to the left, the aircraft body will by to the left.

Kind Tips
PUSH SLOWLY Throttle joystick, when the aircraft leaves the ground and enters the air, if the aircraft is in Spinning in the air or leaning in different directions. you can use fine-tuning to correct the movement.

Enter fine-tuning

• This function can be used to fine-tune the flight attitude when the aircraft deviates during flight. When the aircraft is deflected, press the “di” key to enter the trim button, and within 5 seconds after the sound, turn the direction control lever in the opposite direction to make the aircraft no longer deflect. In the fine-tuning mode, if you do not perform the operation within 5 seconds, you will automatically exit the fine-tuning mode, or you can press the
• Enter the fine-tuning button again to exit the fine-tuning mode.
• When the aircraft is hovering, the fuselage is deflected backward, press the enter fine-tuning key, and the direction joystick Dial forward to fine-tune the aircraft to hover smoot!

• When the aircraft is hovering, the fuselage is deflected forward, press the enter fine-tuning key, and the direction joystick Dial backward to fine-tune the aircraft to haver smooth.

• When the aid all is hovering, the fuselage is defle ded to the le fi, press the enter fine-tuning key, and the direction joysfick. Dial to the right to fine-tune the aircraft to hover smoothly.

• When the aircraft is hovering, the fuselage is deflected to the right, press the enter fine-tuning key, and the direction joystick Dial to the left to fine-tune the airer aft to hover smoothly.

Note: When the aircraft is within 30cm from the ground, the aircraft will be affected by its own blades and  become unstable. This is called “ground effect reaction” when the altitude of the aircraft is lower. The impact of ground effect response is greater.

Speed files(slow, medium, fast)

• During the flight control process of the aircraft, the flight speed of the aircraft can be adjusted according to the proficiency of the control. The remote control defaults to the slow gear when it is turned on.Press the speed gear button, and the remote controller will make two beeps of “di, di”, indicating that it has entered the medium speed gear. Press the key again to issue “di, di, di”
• Press three times to enter the fast gear, and press it again to make a “di” sound to switch back to the slow gear.

Headless mode/one key back

When the aircraft takes off, the direction in which the nose of the aircraft is the default front where the headless mode is tumed on. When flying to a certain altitude and you cannot see the direction of the aircraft’s nose clearly, you can short press the headless mode button to turn on the aircraft’s headless mode. At this time, the direction the aircraft is pointing at when it takes off is the forward direction of the aircraft. To exit this mode, just short press this key again. Press and hold this button to enable the one-button reverse function, and the aircraft will fly in the direction where the tail of the aircraft was aligned when it took off. Toggle the direction joystick at will to exit the one-button backward function.

3D Rollover

When you have mastered the basic movements in front of you, you can try the more breathtaking 3D rollover function. After flying the aircraft to a height of 3 meters, press the roll button, and the remote control “di” will sound. At this time, the steering control lever will move forward/backward/left/right, and the aircraft can roll forward/backward/left/right. If you press the rollover button and do not perform the operation within 8 seconds, it will automatically resume.

360 obstacle avoidance mode

When the aircraft is flying in an environment with obstacles, the obstacle avoidance function of the aircraft can be turned on Enter 360 obstacle avoidance mode. In obstacle avoidance mode, when the aircraft detects obstacles in the front/rear/left/right When there is an obstacle, the aircraft will sense the obstade, thus starting the emergency braking function. To ensure the safety of the aircraft Safe flight!
(It is recommended to tum on the obstacle avoidance function in indoor spaces with a length and width of 6 meters * 6 meters or more)

Camera Angle Adjustment

Press the “camera is adjusted downward.” function key, control the downward adjustment of the camera on the aircraft. Press the “Camera is adjusted Up” function key, control the camera on the aircraft to adjust upward.

Pre-flight Environment

1. Flying indoors: Please choose a spacious place with no obstacles, pets and people nearby to fly
2. Flying outdoors: Please choose to fly in warm, sunny and windless or breezy weather.
3. Do not fly in weather with extreme temperatures: flying in overheated or overcold weather will affect the flight effect or damage the model.
4. Do not fly in strong winds, as strong winds may cause the aircraft to disappear or be damaged

Precautions

1. When the power of the remote control or the aircraft is low, the remote control distance will be affected.
2. If the battery of the aircraft is insufficient, the flying height may be insufficient or it may be difficult to take off.
3. If the aircraft is damaged or deformed, please repair it in time. If the rotor is broken or damaged, please do not fly, otherwise it will cause injury.
4. Please take out the battery of the remote control if it is not used for a long time, to avoid damage to the productt caused by liquid leakage.
5. Do not let the aircraft crash at high altitudes or collide severely, which will damage the aircraft or shorten the life of the aircraft.

Problem solving and guidance

ABOUT COMPANY

• hytobp@htwlkj.net
• https://www.hytobp.net
• +1 602-563-6540

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>