ICECO JP42 Refrigerator User Manual
- June 8, 2024
- ICECO
Table of Contents
JP42 Refrigerator
User Manual Please email us at:
official@icecofreezer.com
What’s Inside
MODEL JP42 Series
External dimensions(LxWxH)| 720×415×445 mm (28.4×16.4×17.6 inch)
Net weight| 20.5 kg (45 lbs)
Storage volume| 42 liters (44 quarts)
Supply voltage| DC 12V/24V
Temperature setting| -18°C to + 10°C (0°F to 50°F)
Insulation| C-pentane
Shell material| LLDPE
Operation
A Power (Turn on/off)
B Compressor Speed (MAX/ECO Mode)
C Temp. Setting DOWN
D Temp. Setting UP
2.1 MAX & ECO ModeAfter the fridge turned on(Press A/Power Button), you
can press Button B to switch between MAX or ECO compressor speed for the
fridge.
2.2 Switch Between °C to °F
With the fridge standby (plug-in, without pressing Power Button A to turn on),
press and hold Botton B and D for 3 seconds, press Button C or D to select
Celsius or Fahrenheit.
2.3 Triple Battery Protection Operation With the fridge standby (plug-in,
without pressing Power Button A to turn on), press and hold Button A & B for 3
seconds to enter adjustment mode. Short press Button C or Button D to adjust
the fridge’s battery. protection level pre-sets. “ ” represents low gear. “
” represents
medium gear. “ ” represents high
gear.
NOTICE: Details of Battery Protection Mode could be found in Page 12.
2.4 Setting Temperature
The SET temperature will appear as a FLASHING number, and after the
temperature is SET, the display will return to showing the fridge’s CURRENT
interior temperature.
Care And Maintenance
3.1 Cleaning
Please use a wet cloth and warm water mixed with gentle non-abrasive
detergents to clean the interior and exterior of your fridge.
3.2 DOs and DON’Ts
- Please power off and unplug the unit before cleaning
- Please use non-abrasive detergent to cleaning the interior/exterior of the fridge
- Please don’t scrap the interior of the fridge to defrost/de-ice the fridge
- Please don’t pressure-wash/spray the fridge with a running water hose
Error Codes & Solutions
Code | Description |
---|---|
E1 | The DC voltage is below the protection setting and the battery protection |
mode is activated.
E2| The cooling fan overloads with more than 1A of current.
E3| Motor start error
The motor of compressor is blocked or the pressure difference in the
refrigeration system is too high.
E4| Minimum motor speed error
The compressor overloads and the motor can not maintain its minimun speed 1850
rpms.
E5| Thermal cut-out of electronic unit
Thermal cut-out error If the refrigeration system overloads, or the ambient
temperature is too high, the thermal
sensor is overheated.
E6| NTC fault
NTC open circuit or short circuit.
Solutions
- If this error code appears when the fridge is operating on 12V DC, please try to lower the battery protection setting and see if the error is resolved. The battery protection mode may be triggered prematurely on certain vehicles due to small wiring imperfections, contributing to a measured DC voltage drop at compressor start-up. Lowering the battery protection setting may resolve this issue.
- Please also care about the reading of your battery voltage to make sure it is not depleted/discharged.
- If possible, please connect the AC power to try if the refrigerator appears error code.
- Please contact us directly if the error persists.
Warranty & Return Policy
- 30 days refund guarantee upon receiving.
- 5 years warranty on the compressor.
- 1 year warranty for other parts or accessories.
For returns or exchanges, please fill out the following return and exchange
registration form in the package as a proof of return. All materials must be
returned in the original
condition and packaging. Thank you for your cooperation.
If the product is received damaged or defective during transportation, you
need to contact our customer service within 2 business days. Make sure to
provide relevant photos or videos, your order ID number and your name. A
customer service agent will help assist into solving the issue at a timely
manner. (Return, Exchange, or Discount Compensation) A free return label will
be provided if needed.
Troubleshooting (Q & A)
Heat resistance & water resistance?****
– Heat resistance
– ICECO refrigerators are engineered to operate at an ambient temperature of
up to 55 °C(131 °F).
– Weather Proof
– ICECO refrigerators can operate under light rain conditions. Please keep the
vents above clear of water, and please add some clearances to the bottom of
the fridge if the ground is wet.
– We DO NOT recommend exposing the fridge to moderate or heavy rain.
– As with all electrical appliances, over-exposure to moisture may shorten the
fridge’s life.
How long can the ICECO refrigerator keep the temperature after powering off?****
– The following data only represented the result of the lab experiment with
empty box. Everything is based on the actual situation.
– Insulation Performance
Why did it change back to the original temperature after setting the temperature?****
– The Solid/Non-Flashing number on the display is the CURRENT interior
temperature.
– The Flashing number is your SET temperature after adjustment. The compressor
will shut off when the SET temperature is reached.
What should I do if the refrigerator is upside down when it is delivered?****
– Please leave your refrigerator upright for 24 hours to allow the compressor
lubricant to resettle before powering on the fridge.
– Otherwise it may contribute to certain operation abnormalities.
What is the function of triple battery protection? How do they work?****
– The triple battery protection is designed to prevent over-discharge and
battery depletion.
– When the measured DC voltage is below the set value, the compressor is shut
off to prevent battery depletion.
– For example, when you switch to a LOW MODE, the battery voltage is under 9.6
volts, the refrigerator will automatically cut the power OFF;
– The refrigerator will start again till the battery voltage reached back to
10.9 volts.
Model | Insulation Test |
---|---|
JP42 | Ambient temperature of 25°C (77°F),refrigerator temperature from |
-18°C(0°F) to 20°C (68°F) needs 8 hourson average.
Battery
Protection
(SWITCH POSITION)| Cut-out 12V| Cut-in 12V| Cut-out 24V| Cut-in 24V
---|---|---|---|---
LOW| 9.6| 10.6| 21.3| 22.7
MED| 10.1| 11.4| 22.3| 23.7
HIGH| 11.1| 12.4| 24.3| 25.7
What is the power draw in max/ fast cooling mode?****
– This data is only suitable for laboratory testing, and the actual power is subject to actual conditions.
Model | Electrical Power | Model | Electrical Power |
---|---|---|---|
GO12 | 50W | JP42 | 55W |
GO20 | 50W | VL35 Series | 65W |
JP Series | 60W | VL Series | 85W |
VL45 ProS | 45W | VL60 ProS | 47W |
VL75 ProD | 57W | VL90 ProD | 61W |
Why is there a temperature difference (between the actual temperature of the refrigerator and the set temperature)?****
– Because of the sinking nature of cold air, the different temperatures may exist in different locations in the refrigerator (the temperature of the bottom will be the lowest). The panel only shows the average temperature of the refrigerator.
What kind of cable do I need to use in the car and at home?****
– The DC cable is provided. You can power it from your vehicle’s cigarette lighter plug using the DC cable. You can also power it at home, but you need to use with AC cable as precondition.
What is the specification of the fuse of the refrigerator?****
– The supply line is protected by a 15A fuse located in the refrigerator.
Safety Instruction
SAFETY INSTRUCTIONS
Please read the user manual and safety instructions carefully before using
the appliance.
By ignoring the safety instructions, the manufacturer cannot be held
responsible for the damage.
The use of accessories that are not recommended by manufacturer can cause
injuries and will invalidate any warranty that you may have.
The appliance shall not be exposed to moderate/heavy rain.
Place the refrigerator on a dry, secure surface, with adaquate ventilation.
Do not leave the refrigerator unattended in uncovered, outdoor areas exposed
to the elements.
Do not use this appliance near direct heatsources, such as an open flame or
radiator.
Do not place open containers of liquid inside the fridge.
Please don’t put hot/warm food into the fridge directly without letting it
cooling off. Place/arrange the content of your fridge securely when using the
refrigerator inside a moving vehicle.
To maximize energy savings, please make sure the lid is closed and secure, and
only open the fridge when you need to.
The power cable must only be replaced by qualified technical personnel and by
an assistant body authorized by the manufacturer.
Before carrying out any maintenance operations on the refrigerator, disconnect
all power sources from the fridge.
This appliance is suitable for camping use.
WARNING!
Please keep the fridge in a well ventilated area.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Do not use electrical devices inside the food storage compartments of the
appliance, unless approved/recommended by the manufacturer.
Do not store explosive items, such as aerosol cans with a flammable propellant
in this appliance.
Risk of fire and electrical shock.
Do not let hot items touch the plastic parts of the appliance.
Do not put flammable products or items in, near or on the appliance.
Do not touch the compressor or the condenser when the fridge is
operating. They may be very hot.
**** When setting up the appliance, ensure the supply cord is not trapped or
damaged.
Further information is provided on the technical data label inside the
product.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications. -
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
-
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
-
DANGER: Risk of child entrapment. Before you throw away your old refrigerator or freezer:
- Take off the doors.
- Leave the shelves in place so that childrenmay not easily climb inside.
Cooler Than A Cooler
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>