V I V O DESK-E3CVB-C-D-N-W Corner Electric Desk with Storage Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O DESK-E3CVB-C-D-N-W Corner Electric Desk with Storage
Product Information
The 2 Tier 63 x 55 Corner Electric Desk with Storage is a versatile and functional desk that can be easily assembled with the help of the included instruction manual and assembly video. This desk is designed to fit in the corner of a room and comes with ample storage space for your office supplies. The desk also features a motorized leg for easy height adjustment, allowing you to work comfortably while sitting or standing. The desk has a weight capacity of 176lbs (80kg) and includes all necessary hardware for assembly.
Product Usage Instructions
- Before beginning the assembly process, make sure to check that all parts are included and in good condition. If any parts are missing or damaged, contact customer support within 30 days of delivery to have them replaced.
- Use the included Phillips screwdriver and level to assemble the desk according to the instructions provided in the manual or assembly video.
- Make sure to not exceed the weight capacity of the desk, as doing so may result in serious injury.
- Do not use this product for any purpose other than what is explicitly specified in the manual.
- If you have any questions or doubts about the safety of the installation, contact a qualified technician.
- For easy height adjustment, use the motorized leg to switch between sitting and standing positions.
- Make sure to use adult supervision when using this product around children under 3 years old, as there are small parts that could pose a choking hazard.
- If you need to return the product, contact customer support within 30 days of delivery. Note that return shipping charges will be at the buyer’s expense for items ordered in error or no longer needed.
ASSEMBLY VIDEO AVAILABLE:
Follow along step-by-step with our video walk through by scanning the QR code
with your mobile device or by following the product
link: vivo-us.com/products/desk-e3cvb
help@vivo-us.com
309-278-5303
www.vivo-us.com
Contact Us First!
DO NOT RETURN ITEM
Our friendly product support team is here to help!
PERSONABLE CUSTOMER SUPPORT
7AM – 7PM
Monday-Friday
Give us a Call: 309-278-5303
Chat Us: www.vivo-us.com
Email Us: help@vivo-us.com
We’re Here for You!
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We offer immediate assistance with rapid response times from customer service
agents and product technicians to help you every step of the way!
Missing a Part?
If any parts are received damaged / defective OR you are missing a part,
please reach out to us within 30 days of product delivery to have it replaced
at no cost.
We are happy to replace parts to ensure you have a fully functioning product
PRE-ASSEMBLY | BEFORE YOU BEGIN
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified ! technician. Check
carefully to make sure there are no missing serious injury. Do not use this
product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ELECTRICAL WARNING :
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND
ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
- DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
- DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
- NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
- NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
- ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
- OUTDOOR USE IS PROHIBITED.
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
Product Warranty
For the most up to date details on your product’s warranty, please visit the
product’s listing on our website or reach out to customer support. vivo-
us.com/products/desk-e3cvb
Returns
Product Didn’t Work Out?
We offer a hassle-free 30 day return on all products. Contact customer support
at 309-278-5303 or help@vivo-us.com. Please note:
For items ordered in error or no longer needed, the return shipping charges
will be at the buyer’s expense.
TOOLS NEEDED
PACKAGE CONTENTS
ASSEMBLY STEPS
STEP 1: Assemble Legs
Connect Left Crossbar (12) to Left Leg (20) and Angled Right Crossbar (15) to
Right Leg (18) using M6x8mm Screws (S-A) and 5mm Allen Wrench (T-B).
Attach Right Crossbar (14) and Short Left Crossbar (13) to Motorized Leg (19) using M6x8mm Screws (S-A) and 5mm Allen Wrench (T-B).
STEP 2: Secure Side Brackets and Feet
Attach Side Brackets (17) to Right Leg (18) and Left Leg (20) using M6x8mm
Screws (S-A) and 5mm Allen Wrench (T-B).
Asemble Feet (24) to Right and Left Leg (18, 20) using M6x35mm Screws (S-B) and 5mm Allen Wrench (T-B).
STEP 3: Install Casters (Optional) and Anti-Vibration Pads
Optionally, Foot Pads (24A) can be swapped out for Locking Casters (31).
Unscrew Foot Pads (24A) and thread Locking Casters (31) into Feet (24) using
Wrench (T-C).
Insert Anti-Vibration Pads (28) into the frame assembly along with Short Connector Bracket (21) and Long Connector Bracket (22).
STEP 4: Assemble Desktop and Install Connector Brackets
Assemble Corner Panel (1), Right Panel (2), and Left Panel (3) using Desktop
Connectors (23) and M5x16mm Screws (S-C) and a Phillips screwdriver.
Connect the frame assembly using Short Connector Bracket (21) and Long
Connector Bracket (22) with M6x8mm Screws (S-A) and 5mm Allen Wrench (T-B).
T- B
STEP 5: Secure Frame and Desktop
Secure the frame assembly with Control Panel (25) and Hooks (30) to the
desktop assembly using M5x16mm Screws (S-C) and a Phillips screwdriver.
STEP 6: Install Sync Rods
Loosen the coupling nut on Sync Rods (16) and insert hex shaft into Left and
Right Legs (18, 20), making sure the metal retaining ring makes contact with
the legs. Ensure that all three legs are the same height. If not, turn Sync
Rod (16) clockwise to raise corresponding leg, and counter-clockwise to lower.
STEP 7: Install Sync Rods
Extend Sync Rods (16) onto Motorized Leg (19) and tighten the nuts. Tighten
both set screws on the end of Sync Rods (16) using the 2mm Allen wrench (T-B).
STEP 8: Connect Power Cables
Connect AC Adapter (26) and cable from Motorized Leg (19) to Control Panel
(25). If needed, use Extension Cable (27) for cable from Motorized Leg (19) to
extend length. Use Cable Clips (29) to secure cables to desktop.
STEP 9: Install Shelf Panels
Assemble Shelf Dividers (7), Short Corner Shelf Panel (8), Long Corner Shelf
Panel (9), and Rear Shelf Panels (10) to the desktop assembly using M4.2x35mm
Screws (S-D) and a Phillips screwdriver using all locations shown below.
STEP 10: Assemble Shelves
Insert Cam Lock Screws (S-E) using a Phillips screwdriver and Wooden Dowels
(S-G) into Corner Shelf Panel (4), Left Shelf Panel (5), and Right Shelf Panel
(6).
Place the Shelf Assembly on top of the divider assembly.
STEP 11: Assemble Shelves Continued
Insert Cam Lock Nuts (S-F) into Shelf Dividers (7), Short Corner Shelf Panel
(8), Long Corner Shelf Panel (9), and Rear Shelf Panels (10) making sure arrow
is facing up. Using a Phillips screwdriver, turn Cam Lock Nuts (S-F) clockwise
to secure the shelf assembly in place.
Unfold Drawers (11) and place drawer insert inside.
STEP 12: Install Drawers
Slide Drawers (11) into the shelf assembly.
CONTROLLER – USER MANUAL
Memory Presets
Press any number and the desk will return to the programmed height. See
Programing Memory Presets to program presets.
Arrow Keys
Press and hold the UP arrow for the desk to begin raising. Release when desk
reaches desired height. Press and hold DOWN arrow to lower desk. Release
button when desired height is reached.
Memory Mode
To save a set height, press and hold the “1” button for 5 seconds until “H1”
appears. Your height setting is now stored. Follow steps for the other
numerical buttons to save up to four height settings.
Reset Mode
If the height of the desk is incorrect, press the down arrow until the desk
moves to the fully lowered position. Press and hold the down arrow. “RES” will
be displayed and the leg will lower and rebound upwards. Release the down
arrow and your frame has been reset.
Troubleshooting
Error Code: Description/Resolution
- E10 Sensorless Alarm: This alarm triggered when the sensor cannot be detected. Power off desk and check the connection between the motor and control panel, then re-power.
- E20 Overload Alarm: Remove desk items and try again.
- E02 Rebound Protection: Check for desk vibration, obstacles, or desk incline. If no issues found, complete the reset process and try again.
- E32 Overvoltage Alarm: Voltage is higher than allowed value. Power off desk and check connection between power and control panel. Power on again.
- E31 Undervoltage Alarm: Voltage is lower than required value. Power off desk and check connection between power and contorl panel. Power on again.
- HOT Overheated Alarm: Power off and wait 18 seconds before use again.
CHECK OUT OTHER GREAT PRODUCTS FROM
EXPLORE MORE AT VIVO-US.COM
We offer a wide array of home & office products to fit your needs. From height
adjustable desks to monitor mounts to keyboard trays and more!
SPEAKER MOUNTS & STANDS
Whether you’re mounting a sound bar or surround sound system, we’ve got a
mounting solution to fit your needs
CABLE MANAGEMENT
From single monitor mounts to hex mount, grommet or crampons, we’ve got a
mounting solution for your setup.
MONITOR MOUNTS
From single monitor mounts to hex mount, grommets or crampons, we’ve got a
mounting solution for your setup.
WHO WE ARE
VIVO is more than a brand of ergonomic office furniture. We are a team of
creative and innovative individuals working together to offer high quality,
affordable ergonomic solutions. We think and work outside of the box to serve
you, our customer, to the best of our abilities.
Need Assistance?
We Would Love to Help!
Personable Customer Support | Mon-Fri 7am-7pm
We offer immediate assistance with rapid response times from customer service
agents and product technicians to help you every step of the way!
- Call Us: 309-278-5303 Average Resolution Time: 5m 4s
- Chat Us: www.vivo-us.com Average Resolution Time: < 15m
- Email Us: help@vivo-us.com Average Resolution Time: 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within <2hr
- 92% within < 3hr
LOVE YOUR NEW VIVO SETUP?
Ready to share that new amazing setup? Want to brag about that amazing new
ergonomic solution?
Tag us in your photo!
FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-
US.COM
LAST UPDATED: 11/10/2022 REV2LF
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Two Tier 63" x 55" Corner Electric Desk with Storage – VIVO - desk solutions, screen mounting, and more
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>