V I V O STAND-V001M Single Monitor Desk Mount Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O STAND-V001M Single Monitor Desk Mount
Product Information
The Single Monitor Desk Mount, SKU: STAND-V001M, is a high-quality product designed for mounting monitors for comfortable viewing and better space management. The mount can handle a weight capacity of up to 22lbs (10kg) and is compatible with most monitors with VESA patterns of 75x75mm or 100x100mm. The package includes all necessary hardware and tools for assembly, including an arm, pole cap, pole, clamp, grommet plate, support plate, rubber pads, cable clip, screws, and allen wrenches.
For more information and helpful videos related to this product, scan the QR
code or visit https://vivo-us.com/products/stand-v001m.
If you have any questions or concerns about the product, please contact our
dedicated support team at help@vivo-us.com or call us at 309-278-5303. Our
support team is available Monday-Friday from 7:00am-7:00pm CST.
Product Usage Instructions
- Insert the Pole Cap (F) into the Pole (B).
- Option A: Assemble the Pole (B) to the Clamp (C) using M6x16mm Screws (S-A) and 4mm Allen Wrench (T-A). Remove the adhesive backing from Rubber Pads (G) and stick them to the underside of Clamp (C). Attach the clamp assembly to the desktop.
- Option B: Assemble the Grommet Plate (D) and Support Plate (E) to the Pole (B), then secure the assembly to the desktop using screws (not included).
- Slide the Cable Clip (H) and Arm (A) onto the Pole (B). Tighten Arm (A) using 5mm Allen Wrench (T-B).
- Attach two Screws (M-A or M-B) and M5 Washers (M-C) to the top mounting holes of your monitor, making sure to leave 3mm of threads exposed. Insert Screws (M-A, M-B) into the top slots in the VESA plate on Arm (A). Secure using two more Screws (M-A or M-B) and M5 Washers (M-C) in the bottom two holes and tighten using a Phillips screwdriver. Adjust the tilt of the monitor using 6mm Allen Wrench (T-C).
- Adjust the tension in Arm (A) using 5mm Allen Wrench (T-B).
- Store 5mm Allen Wrench (T-B) and 6mm Allen Wrench (T-C) in Cable Clip (H) for future adjustment.
- Manage cables using the cable management clips on Arm (A) and Cable Clip (H). Adjust the monitor as desired.
If any parts are received damaged or defective, please contact us at help
@vivo-us.com or call us at 309-278-5303. We are
happy to replace parts to ensure you have a fully functioning product.
For more VIVO products, please visit our website at https://vivo-us.com.
WARNING: If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1: Insert Pole Cap (F) into Pole (B).
STEP 2 (Option A)
Clamp Installation
Assemble Pole (B) to Clamp (C) using M6x16mm Screws (S-A) and 4mm Allen Wrench
(T-A). Remove adhesive backing from Rubber Pads (G) and stick them to the
underside of Clamp (C). Attach the clamp assembly to the desktop.
STEP 2 (Option B)
Grommet Base Installation
Remove screws from the back of Clamp (C) using 4mm Allen Wrench (T-A). Using a
Phillips screwdriver, remove the screw from Clamp Bolt (C2) and separate Clamp
Bolt (C2)
from Clamp (C). Remove adhesive backing from Rubber Pads (G) and stick them to
the underside of Grommet Plate (D). If desk does not have an existing grommet
hole, drill a 3/8” (10mm) diameter hole at the desired position through the
mounting surface. Assemble Pole (B) to Grommet Plate (D) using Clamp Bolt (C2)
and Support Plate (E).
STEP 3: Slide Cable Clip (H) and Arm (A) onto Pole (B). Tighten Arm (A) using 5mm Allen Wrench (T-B).
STEP 4: Attach two Screws (M-A or M-B) and M5 Washers (M-C) to top mounting holes of your monitor, making sure to leave 3mm of threads exposed. Insert Screws (M-A, M-B) into the top slots in the VESA plate on Arm (A). Secure using two more Screws (M-A or M-B) and M5 Washers (M-C) in the bottom two holes and tighten using a Phillips screwdriver. Adjust the tilt of the monitor using 6mm Allen Wrench (T-C).
STEP 5: Adjust the tension in Arm (A) using 5mm Allen Wrench (T-B) as shown below.
STEP 6: Store 5mm Allen Wrench (T-B) and 6mm Allen Wrench (T-C) in Cable Clip (H) for future adjustment.
STEP 7: Manage cables using the cable management clips on Arm (A) and Cable Clip (H). Adjust the monitor as desired.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times. If any parts are received
damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
309-278-5303: AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent!
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Single Monitor Desk Mount – VIVO - desk solutions, screen mounting, and more