Ayepokhi Fluorescent Jellyfish Lamp User Manual
- June 10, 2024
- Ayepokhi
Table of Contents
Ayepokhi Fluorescent Jellyfish Lamp
Usage method
IMPORTANT
add 2 drops of liquid detergen, the jellyfish must be soaked In the water
for 24 hours before putting into the container,
- Remove the plastic stopper on the top of the container check batteries are in correctly
- Fill with water, use only distilled, demineralised or bottled water. (see safety hints) do not fill completely. leave approx 5mm of space at top
- Add 2 droos of liquid detergent.
- Put the soakedjellyfish in the container.
- There are some small bubbles in the jellyfish and container, please discharge the bubbles by one stick.
- Place the stopper back on making sure it fits securely to prevent leaking.switch on and watch themagical water land come to life.
- turn on red
- blue
- green
- Purple
- yellow
- light blue
- White
- Colorful
- discoloration
- shutdown
Remote Control
Warm tip: The remote control RF direction can improve the sensitivity of the remote control when it is aligned with the control button of the jellyfish light.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>