xiaomi 1S Mi Electric Scooter User Manual

June 4, 2024
Xiaomi

xiaomi 1S Mi Electric Scooter User Manual
xiaomi 1S Mi Electric Scooter

Package Contents

  • User Manual

  • Important Information

  • Specifications

  • Extension Nozzle

  • T-shape Allen Key

  • Screw
    Package Contents

  • Power Adapter
    Package Contents

  • Tire

Assembly and Set-Up

  1. Fold the handlebar stem up, fasten it, and put down the kickstand.

  2. Install the handlebar onto the stem.

  3. Tighten the screws onto both sides of the stem with the Tshaped Allen key

Charge Your Scooter

The scooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).
Charging instruction

  1. Lift up the rubber flap

  2. Plug the power adapter into the charging port.

  3. Unplug when charging is completed.

  4. Put back the rubber flap.

Connect with Mi Home / Xiaomi Home Ap

  1. The scooter without being activated will keep beeping when turned on, and its speed is limited to 10 km/h.

  2. Scan the QR code to download and install the app.

QR code

  1. Open Mi Home / Xiaomi Home app.

  2. Tap “+” on the upper right, and then follow prompts to add your device
    Connection instruction

  3. Follow the on-screen instructions in the app to activate our scooter for the first use.
    Connection instruction

  4. The beeping sound will not stop until the scooter is activated.
    Connection instruction

How To Ride

  1. Warning: Wear a helmet, elbow pads and knee pads.
    Using instruction

  2. Step on the deck with one foot, and slowly kicks off the 2 EN other on the ground.
    Using instruction

  3. The accelerator initiates once the coasting speed exceeds 5 km/h.
    Using instruction

  4. Release the accelerator and squeeze the brake lever for a sudden brake.
    Using instruction

  5. Tilt your body to the steering direction as you turn, and   slowly turn the handlebar.
    Using instruction

  6. Put down the kickstand when parking.
    Using instruction

Safety Reminder

  • Always steer clear of obstacles
    Safety Reminder

  • Keep your speed between 5-10 km/h when you ride through speed bumps, elevator door stills, bumpy roads or other uneven surfaces Slightly bend your knee to better adjust mentioned surface.
    Safety Reminder

  • Avoid hitting your head on door frames, elevator and other overhead obstancles.
    Safety Reminder

  • Do not press the accelerator when you’re walking alongside the scooter.
    Safety Reminder

  • Do not ride in traffic lanes or residential areas where vehicles and pedestrians are both allowed.
    Safety Reminder

  • Do not abruptly change the steering direction at high speed.
    Safety Reminder

  • Do not hang bags or other heavy stuff on the handlebar.
    Safety Reminder

  • Do not ride on one foot.
    Safety Reminder

  • Do not accelerate when going downhill, and brake in time to slow down. When encountering a steep incline, you need to step off the scooter and push.
    Safety Reminder

  • Do not use mobile phone or wear earphones when operating the scooter.
    Safety Reminder

  • Do not ride in the rain. Do not ride through puddles or any other (water) obstacles.
    Safety Reminder

  • Do not ride with anyone else, including children.
    Safety Reminder

  • Do not keep your feet on the rear mudguard.
    Safety Reminder

  • Do not touch the disc brake.
    Safety Reminder

  • Do not let go of the handlebar while riding.
    Safety Reminder

  • Do not try riding up or down stairs, nor try jumping over obstacles.
    Safety Reminder

Folding and Carrying

  1. Hold the handlebar stem, turn it counterclockwise to open the safety hook and open the quick release lever.
    Folding and Carrying

  2. Align the bell and the buckle and hook them
    Folding and Carrying

  3. Hold the handlebar stem with either one hand or both hands to carry.
    Folding and Carrying

  4. Disengage the bell lever from the buckle on the mudguard.
    Folding and Carrying

Adjusting the Disc Brake

  • Before adjustment, make sure the scooter is powered off and not charging.
    If the brake is too tight/loose, use the 4 mm Allen key to loosen the screw on the caliper. Then slightly adjust the brake line (decrease/increase the exposed lenght), and tighten the screw again.
    Adjusting the Disc Brake
Tire Valve Stem
  • Unscrew the valve cap.
  • Connect the extension nozzle to the tire valve stem.
  • Connect the pump to inflate the tire
    Tire Valve Stem

Lock Your Scooter

  • Once the scooter is locked, the motor will be locked and the headlight will be turned off automatically, and there will be an icon displayed in the control panel.
    Lock Scooter
Set Password
  • Tap here>”More Settings”>”Set password”
    Set Password

Note: If no password is set, the scooter can be unlocked by the Mi Home/Xiaomi Home app from any of the phones. Make sure you set the password in the app as soon as possible once you get the scooter. In case you forget the password, please go to www.mi.com or contact the after- sales department for help.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals