ZeNPH ZF01 Smart Audio Sunglasses User Manual

ZENPH SMART AUDIO SUNGLASSES
Product Manual

STATEMENT

First of all, thank you for using our products! Please read this manual before using and using this product correctly. In order to provide better service, the content of this user manual may be changed, and changes that occur due to product performance and functions will not be notified separately.

PRODUCT NUMBER

ZFO1 open directional audio smart glasses, this product is a Bluetooth glasses with stereo function, simple operation, easy to carry

INSTRUCTIONS

Recharge
The power cord is magnetically charged, and the glasses are turned off during the charging process
Long press the left or right button to turn on/off
Turn on/of power cord magnetic boot (default playback volume is 70% when booting) Stand by without using after 5 minutes Long press the left and right buttons to power on separately
Connect
The automatic pairing of left and right ears after power Open the Bluetooth list in the phone settings and search for the AJEYE02 Bluetooth name for pairing
Play music
Click to start playback Click to pause playback Double click to play the next song Triple-click to play the previous song Answer the phone
Click to answer the call Click to hang up Long press 2S to reject the call
Voice assistant
Press and hold for 2S after hearing the prompt tone “di”, then release the button to enter the voice assistant

Low latency mode
Unlimited status 4 taps to enter low latency mode. Restore factory settings/ clear pairing records
5 taps in the power-on state, release the button with a beep and clear the pairing record with the phone
Low battery voice prompt
When the battery power of the glasses is lower than 3.4V, the low battery prompt will start, and the prompt will be once every 5 minutes

Parameter

• EDR5.0 is compatible with mainstream brand mobile phones and other
• Bluetooth devices left and right double speakers, directional playback
• Play continuously for 5 hours at 100% volume, Continuous playback at 60% volume for 8 hours
• The product does not support cleaning

Instructions

Tips

1. Please read the instructions carefully before using this product and keep the instructions
2. For the first use, please fully charge the product
3. If the product does not charge for a long time (more than 2 weeks), please charge it before use
4. Do not wipe the dirty lenses directly. Wet the lenses first, and then dry them with a glasses cloth.
5. Try to use suede and strong absorbent glasses cloth to gently wipe clean, be careful not to apply too much force
6. To wipe the lens, wipe it in one direction, not back and forth, nor wiping circularly on the lens
7. When the battery temperature exceeds-10°C – 60°C, the product will stop working

Precautions

1. Do not dismantle or repair or modify this product for any reason, otherwise, it may cause fire, electronic breakdown or even complete damage to this product
2. Do not place the device in an environment that is too low or too high (below -20°C or above 45°C)
3. Do not let the product come in contact with liquid to get wet, or soak in liquid
4. The glasses can not be exposed to the sun for a long time, otherwise, they will be easily deformed, aging, and broken
5. Do not put the magnetic end of the charging cable close to metal objects to prevent the danger of short circuits caused by magnetically attracting metal objects

Precautions

1. Before using this product, please read all safety information to ensure correct and safe use
2. Using a power supply, charger or battery not approved by the manufacturer may cause fire, explosion and other dangers
3. Please use the accessories approved by the manufacturer and matched with this type of equipment
4. Please use the device within the temperature range of 0°C-35°C, and store the device and its accessories within the temperature range of -20°C- 45°C. When the ambient temperature is too high too low, it may cause equipment failure
5. If the charging is completed, please disconnect the charger from the device, and unplug the charger from the power socket. The continuous charging time should not exceed 12 hours
6. The battery is not allowed to be disassembled, hit, squeezed, or thrown into the fire. If it is severely expanded, please do not continue to use it
7. Do not place in a high-temperature environment, overheating of the battery may cause an explosion
8. Please keep the equipment dry
9. If the equipment or any other parts are not working properly, please do not repair any products by yourself
10. When connecting other devices, please refer to the connection method in the user manual, and do not connect unmatched devices at will
11. To avoid hearing damage, please do not use high volume for a long time

Warning A

1. The use of equipment is strictly prohibited in environments where flammable and explosive oil and gas or chemicals are stored near gas stations, oil depots, chemical warehouses, etc.
2. Do not use this device in hospital operating rooms, emergency rooms, intensive care departments, and other places (to avoid interference with the work of medical instruments, please stay away from pacemakers when using this device, Hearing aids, cochlear implants, and other medical equipment, please keep a distance of more than 15 cm between this equipment and the pacemaker)
3. If you want to use this equipment near personal medical equipment, please consult your physician and equipment manufacturer
4. Please follow all safety warnings and regulations regarding the use of this device while driving
5. During thunderstorms, in order to avoid lightning accidents, please do not use it outdoors
6. Do not use the charger in high-temperature places such as the bathroom, otherwise, it will cause electric shock, personal injury, fire, and damage to the charger
7. Please abide by relevant laws and regulations that are expressly prohibited to use in any environment

Federal Communication Commission
Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ‘
FCC Caution : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Manufacturers:
Shenzhen Zaofeng Technology Co., Ltd.
Service Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>