CRYSTORAMA BRY-8008-BF 8-Light Black Forged Chandelier Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA BRY-8008-BF 8-Light Black Forged Chandelier
ASSEMBLY INSTRUCTION
MODEL # BRY-9008-BF
All electrical components must be installed by a licansed alectridan in
accondance with the National Elactric Code and the appropriat local electrical
codes. You will need g- Cand.
Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE THE
FIXTURE IS DAMP RATED
How to install
- Place the frame on a soft cloth covered platform and lay two pieces of glass on the two adjacent cut outs of the frame. Hold the glade while aligning the holes on the metal strap with the holes on the frame. Two persons handling is recommended for this step.
- Install the and of the rod(without the tab) onto the Lower canopy and secure with a nut. Repeat for all rods. Do not tighten the nut until the and of step #3.
- Spread the rods out equally and align the holes at the tab of rod with holes in the banding ring. Secure the rods with flat head screws. Now the nuts inside the canopy can be tightened to secure the roads In place.
- Place the plate over the top of canopy and secure with the loop.
- Install the mounting bar to the outlet box using two outiet box screws.
- Decide the desired hanging height and cut the chain to the proper length.
- Install the canopy onto the mounting bar and secure with the screw collar loop ring.
Part Number
- (1)-Mounting Hardware For Hanging
- (1)-Canopy For Hanging; W5-1/2″XH1″(XSU8004BFCAN5.5IN)
- (1)-Chain;3.8MM(XSU8004BFCHA3.8MM)
- (1)-Lower Canopy;W7-1/8″XH3/4″(XSU8008BFCAN7.1IN)
- (6)-Metal strap
- (4)-Rods (XSU8008BFSIDEROD)
- (8)-Flat head Screw
- (1)-Loop(XSU8004BFLOOP)
- (6)-Glass;W15-5/8″XH7-1/4″ (XSU8008GLA15.6IN)
- (12)-Machine Screws
- (8)- Bulb(Not Included)
- (1)- Plate
Warning: A NON YARNING TO THE IN FEE PER I A A I and/or birth defect or reproductive harm. For more Information go to www.Ps3/amings.on.gov
Read User Manual Online (PDF format)
Loading......