Yale 691F Electric Trim Instruction Manual
- June 26, 2024
- Yale
Table of Contents
Yale 691F Electric Trim
This product is now proudly being offered under the ASSA ABLOY ACCENTRA™ brand, effective June 20, 2023. Visit ValeCommercial.com/en/ Today for support and information.
NOTES
- This template is an addition to the device template. Locate centerlines using horizontal and vertical references on device template.
- Do not scale drawing.
- Dimensions are in inches (mm).
- LHR door shown. Preparation is typical for both door hands.
- Provide adequate structural support to maintain door integrity during operation.
- Prepare mounting holes when installing trim.
- Dimensions given about a centerline are symmetrical.
- Unspecified radius 1/8 maximum.
NOTE: For 7000 Series, wire access hole must be prepared if a wire
raceway in
the door is not provided (device will be used as raceway). For 2100(F) and
6000(F) series, wire raceway MUST BE provided in the door. Do not prepare wire
access hole.
Note: Lever design prefix does not affect door prep.
RESPONSIBILITY
DOOR AND FRAME MANUFACTURERS ARE RESPONSIBLE FOR PROVIDING ADEQUATE
CONSTRUCTION OR REINFORCEMENTS FOR PROPER INSTALLATION OF HARDWARE SHOWN. ALL
ARCHITECTURAL BUILDERS HARDWARE MUST BE INSTALLED ON PROPERLY REINFORCED DOORS
AND FRAMES, REGARDLESS OF TYPE, MATERIAL, OR METHOD OF CONSTRUCTION.
690F, 691F (Electric Trim)
7000(F) Series, 6000(F) Series & 2100(F) Series SquareBol t® , Rim and Surface
Vertical Rod Exit Devices Wood or Composite Door Preparation
Contact us for support at
1-800-438-1951.
ASSA ABLOY
SUPERSEDES TEMPLATE NUMBER 7400-1690 05-18 7400-1690
DO NOT SCALE DRAWING DATE 11-23
Experience a safer and more open world
Copyright © 2018, 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>